View Item 

Show simple item record

A New Dental Superalloy System: I. Theory and Alloy Design

dc.contributor.authorMohammed, Hamdien_US
dc.contributor.authorAsgar, Kamalen_US
dc.date.accessioned2010-04-13T19:51:27Z
dc.date.available2010-04-13T19:51:27Z
dc.date.issued1973en_US
dc.identifier.citationMohammed, Hamdi; Asgar, Kamal (1973). "A New Dental Superalloy System: I. Theory and Alloy Design." Journal of Dental Research 1(52): 136-144. <http://hdl.handle.net/2027.42/67835>en_US
dc.identifier.issn0022-0345en_US
dc.identifier.urihttps://hdl.handle.net/2027.42/67835
dc.description.abstractBasic factors that influence the physical metallurgy and the mechanical properties of cobalt-base alloys are discussed in this study; these factors include the coherency of the interphase interface, the stacking fault energy, and the average electron hole number. Control of these factors and considerations of corrosion resistance and body compatibility determined the compositions for alloys that fulfill dental requirements.en_US
dc.format.extent3108 bytes
dc.format.extent900962 bytes
dc.format.mimetypetext/plain
dc.format.mimetypeapplication/pdf
dc.publisherSAGE Publicationsen_US
dc.titleA New Dental Superalloy System: I. Theory and Alloy Designen_US
dc.typeArticleen_US
dc.subject.hlbsecondlevelDentistryen_US
dc.subject.hlbtoplevelHealth Sciencesen_US
dc.description.peerreviewedPeer Revieweden_US
dc.contributor.affiliationumSchool of Dentistry, University of Michigan, Ann Arbor, Michigan 48104 USAen_US
dc.contributor.affiliationumSchool of Dentistry, University of Michigan, Ann Arbor, Michigan 48104 USAen_US
dc.description.bitstreamurlhttp://deepblue.lib.umich.edu/bitstream/2027.42/67835/2/10.1177_00220345730520010701.pdf
dc.identifier.doi10.1177/00220345730520010701en_US
dc.identifier.citedreferenceChalmers, B.: Physical Metallurgy, New York: Wiley and Sons, 1962, p 385.en_US
dc.identifier.citedreferenceShewman, P.G.: Transformations in Metals, New York: Mc Graw-Hill, 1969, p 286.en_US
dc.identifier.citedreferenceChristian, J.W.: The Theory of Transformations in Metals and Alloys, New York: Pergamon Press, 1965.en_US
dc.identifier.citedreferenceHeidenreich, R.D., and Shockley, W.: in Strength of Solids, Report on the Conference at the University of Bristol, July, 1947, London: The Physical Society, 1948, p 57.en_US
dc.identifier.citedreferenceKoster, W.: On the Influence of Elements on the Polymorphic Transformation of Cobalt, Z Metallkunde 43:297-303, 1952.en_US
dc.identifier.citedreferenceHashimoto, U. : Relation Between the Allotropic Transformation of Cobalt and Some Additional Elements, Nippon Kinzoku Gakkai-Si 1:77, 1937.en_US
dc.identifier.citedreferenceCobalt (monograph), Belgium: Centre D'information Du Cobalt, 1960, p 261.en_US
dc.identifier.citedreferenceRideout, S.; Manley, W.D.; Ramen, E.L.; Lament, B.S.; and Beck, P.A.: Intermediate Phases in Ternary Alloy Systems of Transition Elements, J Metals 3:872, 1951.en_US
dc.identifier.citedreferencePauling, L.: The Nature of Interatomic Forces in Metals, Physical Review 54:899, 1938.en_US
dc.identifier.citedreferenceJohnson, R.S., JR.: Determination of a Partial Room-Temperature Ternary Constitution Diagram in the As-Cast Cr-Co-Ni System Utilizing a Factorial Experimental Design, Ph D dissertation, University of Michigan, 1970.en_US
dc.identifier.citedreferenceDrapier, J.M. ; De Brouwer, J.L.; and Coutsouradis, D.: Refractory Metals and Intermetallic Precipitates in Cobalt-Chromium Alloys, Cobalt 27:59, 1965.en_US
dc.identifier.citedreferenceFritzlen, G.A. ; Faulkner, W.H.; Bar-Rett, B.R.; and Fountain, R.W.: Precipitates in Cobalt-Base Alloys, Cleveland, Ohio: American Society for Metal, 1959.en_US
dc.identifier.citedreferenceFountain, R.W., and Forgeng, W.D.: Phase Relations and Precipitation in Co-Ti Alloys, Trans AIME 21:998, 1959.en_US
dc.identifier.citedreferenceLudwigson, D.C.: Today's Prosthetic Metals, J Metals 16:226, 1964.en_US
dc.owningcollnameInterdisciplinary and Peer-Reviewed


Files in this item

Name:
10.1177_00220345730520010701.pdf
Size:
879.8KB
Format:
PDF
View/Open

Show simple item record

Remediation of Harmful Language

The University of Michigan Library aims to describe library materials in a way that respects the people and communities who create, use, and are represented in our collections. Report harmful or offensive language in catalog records, finding aids, or elsewhere in our collections anonymously through our metadata feedback form. More information at Remediation of Harmful Language.

Accessibility

If you are unable to use this file in its current format, please select the Contact Us link and we can modify it to make it more accessible to you.