View Item 

Show simple item record

Effect of Heat Treatment on Fracture Toughness ( K IC ) and Microstructure of a Fluorcanasite-Based Glass-Ceramic

dc.contributor.authorOh, Won-sucken_US
dc.contributor.authorZhang, Nai-Zhengen_US
dc.contributor.authorAnusavice, Kenneth J.en_US
dc.date.accessioned2010-06-01T20:14:14Z
dc.date.available2010-06-01T20:14:14Z
dc.date.issued2007-11en_US
dc.identifier.citationOh, Won-suck; Zhang, Nai-Zheng; Anusavice, Kenneth J. (2007). "Effect of Heat Treatment on Fracture Toughness ( K IC ) and Microstructure of a Fluorcanasite-Based Glass-Ceramic." Journal of Prosthodontics 16(6): 439-444. <http://hdl.handle.net/2027.42/73358>en_US
dc.identifier.issn1059-941Xen_US
dc.identifier.issn1532-849Xen_US
dc.identifier.urihttps://hdl.handle.net/2027.42/73358
dc.identifier.urihttp://www.ncbi.nlm.nih.gov/sites/entrez?cmd=retrieve&db=pubmed&list_uids=17760868&dopt=citationen_US
dc.format.extent598120 bytes
dc.format.extent3109 bytes
dc.format.mimetypeapplication/pdf
dc.format.mimetypetext/plain
dc.publisherBlackwell Publishing Incen_US
dc.rights2007 by The American College of Prosthodontistsen_US
dc.subject.otherFluorcanasite-based Glass-ceramicen_US
dc.subject.otherNucleation and Crystallization Processen_US
dc.subject.otherFracture Toughnessen_US
dc.subject.otherCrystal Volume Fractionen_US
dc.titleEffect of Heat Treatment on Fracture Toughness ( K IC ) and Microstructure of a Fluorcanasite-Based Glass-Ceramicen_US
dc.typeArticleen_US
dc.subject.hlbsecondlevelDentistryen_US
dc.subject.hlbtoplevelHealth Sciencesen_US
dc.description.peerreviewedPeer Revieweden_US
dc.contributor.affiliationumAssociate Clinical Professor, Division of Prosthodontics, Department of Biologic & Materials Sciences, University of Michigan School of Dentistry, Ann Arbor, MI. Department of Biomaterials, University of Florida College of Dentistry, Gainesville, FLen_US
dc.contributor.affiliationotherChemisten_US
dc.contributor.affiliationotherProfessor and Associate Dean.en_US
dc.identifier.pmid17760868en_US
dc.description.bitstreamurlhttp://deepblue.lib.umich.edu/bitstream/2027.42/73358/1/j.1532-849X.2007.00233.x.pdf
dc.identifier.doi10.1111/j.1532-849X.2007.00233.xen_US
dc.identifier.sourceJournal of Prosthodonticsen_US
dc.identifier.citedreferenceMacCulloch WT: Advances in dental ceramic. Br Dent J 1968; 124: 361 - 365en_US
dc.identifier.citedreferenceKingery WD, Bowen HK, Uhlmann DR: Introduction to Ceramics ( ed 2 ). New York, NY, John Wiley, 1976, pp. 368 - 374en_US
dc.identifier.citedreferenceCallister WD Jr: Materials Science and Engineering. An Introduction ( ed 4 ). New York, NY, John Wiley, 1997, pp. 399 - 401en_US
dc.identifier.citedreferenceDong JK, Luthy H, Wohlwend A, et al: Heat-pressed ceramics: technology and strength. Int J Prosthodont 1992; 5: 9 - 16en_US
dc.identifier.citedreferenceKon M, Kawano F, Tada Y, et al: Effect of crystallization on fracture strength of castable glass-ceramics containing two crystals. Dent Mater J 1994; 13: 47 - 54en_US
dc.identifier.citedreferenceTada Y, Kawano F, Kon M, et al: Influence of crystallization on strength and color of castable glass-ceramics containing two crystals. Biomed Mater Eng 1995; 5: 233 - 243en_US
dc.identifier.citedreferenceAnusavice KJ, Zhang NZ: Effect of crystallinity on strength and fracture toughness of Li2O-Al2O3-CaO-SiO2 glass-ceramics. J Am Ceram Soc 1997; 80: 1353 - 1358en_US
dc.identifier.citedreferenceKelton KF: Crystal nucleation in liquids and glasses. Solid State Phys, 1991; 45: 75 - 77en_US
dc.identifier.citedreferenceWeinberg MC: Interpretation of DTA experiments used for crystal nucleation rate determinations. J Am Ceram Soc 1991; 74: 1905 - 1909en_US
dc.identifier.citedreferenceParsell DE, Anusavice KJ: Optimization of glass-ceramic crystallization based on DTA exotherm analysis. Dent Mater 1994; 10: 167 - 171en_US
dc.identifier.citedreferenceZhang NZ, Anusavice KJ: Effect of alumina on the strength, fracture toughness, and crystal structure of fluorcanasite glass-ceramic. J Am Ceram Soc 1999; 82: 2509 - 2513en_US
dc.identifier.citedreferenceBeall GH: Chain silicate glass ceramics. J Am Non-Cryst Solids 1991; 129: 163 - 173en_US
dc.identifier.citedreferenceOh WS, Zhang NZ, Anusavice KJ: Effect of nucleation temperature on fracture toughness (KIC) of fluorcanasite-based glass-ceramic. Int J Prosthodont 2003; 16: 505 - 509en_US
dc.identifier.citedreferenceGorman CM, Hill RG: Heat-pressed ionomer glass-ceramics. Part I: an investigation of flow and microstructure. Dent Mater 2003; 19: 320 - 326en_US
dc.identifier.citedreferenceJohnson A, Shareef MY, van Noort R, et al: Effect of furnace type and ceramming heat treatment conditions on the biaxial flexural strength of a canasite glass-ceramic. Dent Mater 2000; 16: 280 - 284en_US
dc.identifier.citedreferenceJohnson A, Shareef MY, Walsh JM, et al: The effect of casting conditions on the biaxial flexural strength of glass-ceramic materials. Dent Mater 1998; 14: 412 - 416en_US
dc.identifier.citedreferenceHÖland W, Beall G: Glass-Ceramic Technology. Westerville, OH, The American Ceramic Society, 2002, pp. 57 - 74en_US
dc.identifier.citedreferenceDeHoff RT, Rhines FN: Quantitative Microscopy. New York, NY, McGraw-Hill, 1968, pp. 336 - 339en_US
dc.identifier.citedreferenceFaber KT, Evans AG: Crack deflection process – II, Experiment. Acta Metall 1983; 31: 577 - 584en_US
dc.identifier.citedreferenceBaik DS, No KS, Chun SS: Mechanical properties of mica glass-ceramics. J Am Ceram Soc 1995; 78: 1217 - 1222en_US
dc.identifier.citedreferenceHill YJ, Mecholsky JJ, Anusavice KJ: Fractal analysis of toughening behavior in 3BaO·5SiO2 glass-ceramics. J Am Ceram Soc 2000; 83: 545 - 552en_US
dc.identifier.citedreferenceDorfman MD, Rogachev DD, Goroshchenko ZI, et al: New Minerals, Canasite. Am Mineral 1960; 45: 253 - 254en_US
dc.identifier.citedreferenceChiragov MI, Mamedov KHS, Belov ANV: Crystal structure of canasite, Ca5Na4K2[Si12O30](OH, F4). Dokl Akad Nauk SSSR 1969; 185: 96 - 99en_US
dc.identifier.citedreferenceAnusavice KJ, Zhang NZ: Effect of nucleation temperature on toughness and flexure strength of canasite glass-ceramics. J Dent Res 1996; 75: 67 ( IADR Abs. No. 395 ).en_US
dc.identifier.citedreferenceChantikul P, Anstis GR, Lawn BR, et al: A critical evaluation of indentation techniques for measuring fracture toughness: II. Strength method. J Am Ceram Soc 1989; 64: 539 - 543en_US
dc.identifier.citedreferenceMarshall DB, Noma T, Evans AG: A simple method for determining elastic-modulus-to-hardness ratios using Knoop indentation measurements. J Am Ceram Soc 1982; 65: C175 - C176en_US
dc.identifier.citedreferenceLakes R: Materials with structural hierarchy. Nature 1993; 361: 511 - 515en_US
dc.owningcollnameInterdisciplinary and Peer-Reviewed


Files in this item

Name:
j.1532-849X.2007.00233.x.pdf
Size:
584.1KB
Format:
PDF
View/Open

Show simple item record

Remediation of Harmful Language

The University of Michigan Library aims to describe library materials in a way that respects the people and communities who create, use, and are represented in our collections. Report harmful or offensive language in catalog records, finding aids, or elsewhere in our collections anonymously through our metadata feedback form. More information at Remediation of Harmful Language.

Accessibility

If you are unable to use this file in its current format, please select the Contact Us link and we can modify it to make it more accessible to you.