View Item 

Show simple item record

Flexural Strength by Fractography in Modern Brittle Materials
dc.contributor.authorDugnani, Robertoen_US
dc.contributor.authorZednik, Ricardoen_US
dc.contributor.authorHoffman, M.en_US
dc.date.accessioned2014-01-08T20:34:44Z
dc.date.available2015-02-03T16:14:39Zen_US
dc.date.issued2013-12en_US
dc.identifier.citationDugnani, Roberto; Zednik, Ricardo; Hoffman, M. (2013). "Flexural Strength by Fractography in Modern Brittle Materials." Journal of the American Ceramic Society 96(12): 3908-3914.en_US
dc.identifier.issn0002-7820en_US
dc.identifier.issn1551-2916en_US
dc.identifier.urihttps://hdl.handle.net/2027.42/102133
dc.publisherNISTen_US
dc.publisherWiley Periodicals, Inc.en_US
dc.titleFlexural Strength by Fractography in Modern Brittle Materialsen_US
dc.typeArticleen_US
dc.rights.robotsIndexNoFollowen_US
dc.subject.hlbsecondlevelMaterials Science and Engineeringen_US
dc.subject.hlbtoplevelEngineeringen_US
dc.description.peerreviewedPeer Revieweden_US
dc.description.bitstreamurlhttp://deepblue.lib.umich.edu/bitstream/2027.42/102133/1/jace12627.pdf
dc.identifier.doi10.1111/jace.12627en_US
dc.identifier.sourceJournal of the American Ceramic Societyen_US
dc.identifier.citedreferenceH. P. Kitchner and J. C. Conway, “ Comparison of the Stress‐Intensity and Johnson‐and‐Holloway Criteria for Crack Branching in Rectangular Bars,” J. Am. Ceram. Soc., 70 [ 8 ] 565 – 9 ( 1987 ).en_US
dc.identifier.citedreferenceS. T. Gulati, J. F. Bayne, W. R. Powell, and J. D. Helfinstine, “ Mirror Constant for AMLCD Glass,” Am. Ceram. Soc. Bull., 83 [ 5 ] 9301 – 3 ( 2004 ).en_US
dc.identifier.citedreferenceA. A. Ruggero, “ Quantitative Fracture Analysis of Etched Soda‐Lime Silica Glass: Evaluation of Blunt Crack Hypothesis ”; M.Sc. Thesis, University of Florida, 2003.en_US
dc.identifier.citedreferenceS. R. Choi and J. P. Gyekenyesi, “ Crack Branching and Fracture Mirror Data of Glasses and Advanced Ceramics ”; NASA‐TM‐1998‐206536, 1998.en_US
dc.identifier.citedreferenceJ. J. Mecholsky, A. C. Gonzalez, and S. W. Freiman, “ Fractographic Analysis of Delayed Failure in Soda‐Lime Glass,” J. Am. Ceram. Soc., 62 [ 11–12 ] 577 – 80 ( 1979 ).en_US
dc.identifier.citedreferenceO. Gaume and S. Pelletier, “ Analysis of Fracture Features for uni‐Axial Bent Glass Plates,” Saint‐Gobain Recherche, Technical Document, April 26, 2013. http://kdsolution.com/pdf_upload/Gaume.pdfen_US
dc.identifier.citedreferenceJ. J. Mecholsky and R. W. Rice, Fractographic Analysis of Biaxial Failure in Ceramics. American Soc. for Testing and Materials, West Conshohocken, PA, STP 827, 1984.en_US
dc.identifier.citedreferenceM. J. Kerper and T. G. Scuderi, “ Relation of Fracture Stress to the Fracture Pattern for Glass Rods of Various Diameters,” Bull. Am. Ceram. Soc., 45 [ 12 ] 1065 – 6 ( 1966 ).en_US
dc.identifier.citedreferenceJ. B. Quinn, “ Extrapolation of Fracture Mirror and Crack‐Branch Sizes to Large Dimensions in Biaxial Strength Tests of Glass,” J. Am. Ceram. Soc., 82 [ 8 ] 2126 – 32 ( 1999 ).en_US
dc.identifier.citedreferenceE. B. Shand, “ Breaking Stress of Glass Determined From Dimensions of Fracture Mirrors,” J. Am. Ceram. Soc., 42 [ 10 ] 474 – 7 ( 1959 ).en_US
dc.identifier.citedreferenceM. J. Ball, D. J. Landini, and R. C. Bradt, “ Fracture Mist Region in a Solda‐Lime‐Silica Float Glass ”; pp. 110 – 20 in Fractography of Ceramic and Metal Failures, ASTM STP 827, Edited by J. J. Mecholsky Jr. and S. R. Powell Jr. American Society for Testing and Materials, West Conshohocken, PA, 1984.en_US
dc.identifier.citedreferenceM. Zaccaria and M. Overend, “ Validation of a Simple Relationship Between the Fracture Pattern and the Fracture Stress of Glass ”; Engineered Transparency. pp. 1 – 9 in International Conference at Glasstec, Düsseldorf, Germany, October 25‐26, 2012.en_US
dc.identifier.citedreferenceR. Dugnani, Z. Pan, and M. Wu, “ Degradation of Consumer Products Glasses after Extended Use,” 2009 MS&T Proc., 1, 500 – 9 ( 2009 ).en_US
dc.identifier.citedreferenceA. I. A. Abdel‐Latif, R. C. Bradt, and R. E. Tressler, “ Dynamics of Fracture Mirror Boundary Formation in Glass,” Int. J. Fract., 13 [ 3 ] 349 – 59 ( 1977 ).en_US
dc.identifier.citedreferenceO. E. Alarcon, R. E. Medrano, and P. P. Gillis, “ Fracture of Glass in Tensile and Bending Tests,” Metall. Mater. Trans. A, 25A, 961 – 7 ( 1994 ).en_US
dc.identifier.citedreferenceG. R. Baran, “ Fractal Characteristics of Fracture Surface,” J. Am. Ceram. Soc., 75 [ 10 ] 2687 – 91 ( 1992 ).en_US
dc.identifier.citedreferenceCorning Website, Corning Willow Glass: Fact Sheet, http://www.corning.com/WorkArea/showcontent.aspx?id=51335, 26 April, 2013.en_US
dc.identifier.citedreferenceD. Hull, “ Influence of Stress Intensity and Crack Speed on Fracture Surface Topography: Mirror to Mist Transition,” J. Mater. Sci., 3, 1829 – 41 ( 1996 ).en_US
dc.identifier.citedreferenceL. Orr, “ Practical Analysis of Fractures in Glass Windows,” Mater. Res. Stan., 12 [ 1 ] 21 – 3 ( 1972 ).en_US
dc.identifier.citedreferenceJ. C. Conway and J. J. Mecholsky, “ Use of Crack Branching Data for Measuring Near‐Surface Residual Stresses in Tempered Glass,” J. Am. Ceram. Soc., 72 [ 9 ] 1584 – 7 ( 1989 ).en_US
dc.identifier.citedreferenceG. D. Quinn, “ Guide to Practice for Fractography of Ceramics and Glasses ”; NIST Special Publication SP 960‐16, Washington, May, 2007.en_US
dc.identifier.citedreferenceJ. J. Mecholsky, S. W. Freimam, and R. W. Rice, “ Fracture Surface Analysis of Ceramics,” J. Am. Ceram. Soc., 11 [ 7 ] 1310 – 9 ( 1976 ).en_US
dc.identifier.citedreferenceJ. J. Mecholsky and S. W. Freiman, “ Relationship between Fractal Geometry and Fractography,” J. Am. Ceram. Soc., 75 [ 12 ] 3136 – 8 ( 1991 ).en_US
dc.identifier.citedreferenceJ. C. Newman and I. S. Raju, “ An Empirical Stress‐Intensity Factor Equation for the Surface Crack,” Eng. Fract. Mech., 15 [ 1–2 ] 185 – 92 ( 1981 ).en_US
dc.identifier.citedreferenceH. P. Kirchner and J. W. Kirchner, “ Fracture Mechanics of Fracture Mirrors,” J. Am. Ceram. Soc., 62 [ 3–4 ] 198 – 202 ( 1979 ).en_US
dc.identifier.citedreferenceP. Dwivedi and D. J. Green, “ Indentation Crack‐Shape Evolution during Subcritical Crack Growth,” J. Am. Ceram. Soc., 78 [ 5 ] 1240 – 6 ( 1995 ).en_US
dc.identifier.citedreferenceE. Sharon and J. Fineberg, “ Confirming the Continuum Theory of Dynamic Brittle Fracture for Fast Cracks,” Nature, 397, 333 – 5 ( 1999 ).en_US
dc.identifier.citedreferenceL. B. Freund, Dynamic Fracture Mechanics. Cambridge University Press, Cambridge, UK, 1990.en_US
dc.identifier.citedreferenceT. A. Schwartz, “ The Fractography of Inorganic Glass ”; M.Sc. Thesis, MIT, Boston, 1977.en_US
dc.identifier.citedreferenceD. Sherman and I. Be'ery, “ Shape and Energies of a Dynamically Propagating Crack under Bending,” J. Mater. Res., 18 [ 10 ] 2379 – 86 ( 2003 ).en_US
dc.identifier.citedreferenceH. G. Richter and F. Kerkhof, Fractography of Glass. Plenum, New York, 1994.en_US
dc.identifier.citedreferenceASTM C1256‐93, “ Standard Practice for Interpreting Glass Fracture Surface Features ”, ASTM International, West Conshohocken, PA, 2008.en_US
dc.identifier.citedreferenceASTM C158‐02, “ Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture) ”; ASTM International, West Conshohocken, PA, 2007.en_US
dc.identifier.citedreferenceASTM D790‐02, “ Standard Test Methods for Flexural Properties of Unreinforced Plastics and Electrical Insulating Materials ”; ASTM International, West Conshohocken, PA, 2002.en_US
dc.owningcollnameInterdisciplinary and Peer-Reviewed


Files in this item

Name:
jace12627.pdf
Size:
439.4KB
Format:
PDF
View/Open

Show simple item record

Remediation of Harmful Language

The University of Michigan Library aims to describe library materials in a way that respects the people and communities who create, use, and are represented in our collections. Report harmful or offensive language in catalog records, finding aids, or elsewhere in our collections anonymously through our metadata feedback form. More information at Remediation of Harmful Language.

Accessibility

If you are unable to use this file in its current format, please select the Contact Us link and we can modify it to make it more accessible to you.