View Item 

Show simple item record

Improved the Durability of Thermal Barrier Coatings with Interface Modified by Three‐Dimensional Mesh Patterns
dc.contributor.authorLuo, L.
dc.contributor.authorZhang, X.
dc.contributor.authorZou, Z.
dc.contributor.authorGuo, F.
dc.contributor.authorQi, H.
dc.contributor.authorZhao, X.
dc.contributor.authorXiao, P.
dc.date.accessioned2016-11-18T21:22:44Z
dc.date.available2017-12-01T21:54:12Zen
dc.date.issued2016-10
dc.identifier.citationLuo, L.; Zhang, X.; Zou, Z.; Guo, F.; Qi, H.; Zhao, X.; Xiao, P. (2016). "Improved the Durability of Thermal Barrier Coatings with Interface Modified by Three‐Dimensional Mesh Patterns." Journal of the American Ceramic Society 99(10): 3406-3410.
dc.identifier.issn0002-7820
dc.identifier.issn1551-2916
dc.identifier.urihttps://hdl.handle.net/2027.42/134409
dc.publisherWiley Periodicals, Inc.
dc.subject.otherthermal barrier coatings
dc.subject.otherinterfaces
dc.subject.othermicrostructure
dc.subject.otherplasma spray
dc.titleImproved the Durability of Thermal Barrier Coatings with Interface Modified by Three‐Dimensional Mesh Patterns
dc.typeArticleen_US
dc.rights.robotsIndexNoFollow
dc.subject.hlbsecondlevelMaterials Science and Engineering
dc.subject.hlbtoplevelEngineering
dc.description.peerreviewedPeer Reviewed
dc.description.bitstreamurlhttp://deepblue.lib.umich.edu/bitstream/2027.42/134409/1/jace14360.pdf
dc.description.bitstreamurlhttp://deepblue.lib.umich.edu/bitstream/2027.42/134409/2/jace14360_am.pdf
dc.identifier.doi10.1111/jace.14360
dc.identifier.sourceJournal of the American Ceramic Society
dc.identifier.citedreferenceH. X. Mei, Y. Y. Pang, and R. Huang, “ Influence of Interfacial Delamination on Channel Cracking of Elastic Thin Films,” Int. J. Fract., 148, 331 – 42 ( 2007 ).
dc.identifier.citedreferenceX. Chen, J. W. Hutchinson, M. Y. He, and A. G. Evans, “ On the Propagation and Coalescence of Delamination Cracks in Compressed Coatings: With Application to Thermal Barrier Systems,” Acta Mater., 51, 2017 – 30 ( 2003 ).
dc.identifier.citedreferenceD. R. Clarke and C. G. Levi, “ Material Design for Next Generation Thermal Barrier Coating,” Annu. Rev. Mater. Res., 33, 383 – 417 ( 2003 ).
dc.identifier.citedreferenceA. G. Evans, D. R. Mumm, J. W. Hutchinson, G. H. Meier, and F. S. Pettit, “ Mechanisms Controlling the Durability of Thermal Barrier Coatings,” Prog. Meter. Sci, 46, 505 – 53 ( 2001 ).
dc.identifier.citedreferenceB. Zhou and K. Kokini, “ Effect of Surface Pre‐Crack Morphology on the Fracture of the Thermal Barrier Coatings Under Thermal Shock,” Acta Mater., 52 [ 14 ] 4189 – 97 ( 2004 ).
dc.identifier.citedreferenceN. P. Padture, M. Gell, and E. H. Jordan, “ Thermal Barrier Coatings for Gas‐Turbine Application,” Science, 296 [ 5566 ] 280 – 4 ( 2002 ).
dc.identifier.citedreferenceK. M. Carling and E. A. Cater, “ Effects of Segregating Elements on the Adhensive Strength and Structure of the α‐Al 2 O 3 /β‐NiAl Interface,” Acta Mater., 55, 2791 – 803 ( 2007 ).
dc.identifier.citedreferenceP. Y. Hou, T. Izumi, and B. Gleeson, “ Sulfur Segregation at Al 2 O 3 /γ‐Ni+γ’‐Ni 3 Al Interfaces: Effects of Pt, Cr and Hf Additions,” Oxid. Met., 72, 109 – 24 ( 2009 ).
dc.identifier.citedreferenceS. Amada and T. Hirose, “ Influence of Grit Blasting Pre‐Treatment on the Adhesion Strength of Plasma Sprayed Coatings: Fracture Analysis of Roughness,” Surf. Coat. Tech, 102 [ 1 ] 132 – 7 ( 1998 ).
dc.identifier.citedreferenceM. Y. He, A. G. Evans, and J. W. Hutchinson, “ Effects of Morphology on the Decohesion of Compressed Thin Films,” Mater. Sci. Eng., A, 245 [ 2 ] 168 – 81 ( 1998 ).
dc.identifier.citedreferenceP. K. Wright and A. G. Evans, “ Mechanisms Governing the Performance of Thermal Barrier Coatings,” Curr. Opin. Solid State Mater. Sci., 4 [ 3 ] 255 – 65 ( 1999 ).
dc.identifier.citedreferenceV. K. Tolpygo and D. R. Clarke, “ Wrinkling of α‐Alumina Films Grown by Oxidation‐II. Oxide Separation and Failure,” Acta Mater., 46 [ 14 ] 5167 – 74 ( 1998 ).
dc.identifier.citedreferenceE. P. Busso, H. E. Evans, Z. Q. Qian, and M. P. Taylor, “ Effects of Breakaway Oxidation on Local Stresses in Thermal Barrier Coatings,” Acta Mater., 58 [ 4 ] 1242 – 51 ( 2010 ).
dc.identifier.citedreferenceC. H. Hsueh, J. A. Haynes, M. J. Lance, P. F. Becher, M. K Ferber, et al., “ Effects of Interface Roughness on Residual Stresses in Thermal Barrier Coatings,” J. Am. Ceram. Soc., 82 [ 4 ] 1073 – 5 ( 1999 ).
dc.identifier.citedreferenceS. Kramer, S. Faulhaber, M. Chambers, D. R. Clarke, C. G. Levi, et al., “ Mechanisms of Cracking and Delamination Within Thick Thermal Barrier Systems in Aero‐Engines Subject to Calcium‐Magnesium‐Alumino‐Silicate (CMAS) Penetration,” Mater. Sci. Eng., A, 490 [ 1 ] 26 – 35 ( 2008 ).
dc.identifier.citedreferenceZ. C. Xia and J. W. Hutchinson, “ Crack Patterns in Thin Film,” J. Mech. Phys. Solids, 48 1107 – 31 ( 2000 ).
dc.identifier.citedreferenceA. M. Limarga, R. Vaßen, and D. R. Clarke, “ Stress Distributions in Plasma‐Sprayed Thermal Barrier Coatings Under Thermal Cycling in a Temperature Gradient,” J. Appl. Mech., 78 [ 1 ] 011003, 8pp ( 2011 ).
dc.identifier.citedreferenceA. G. Evans and J. W. Hutchinson, “ The Mechanics of Coating Delamination in Thermal Gradients,” Surf. Coat. Tech, 201 [ 18 ] 7905 – 16 ( 2007 ).
dc.identifier.citedreferenceR. G. Hutchinson and J. W. Hutchinson, “ Lifetime Assessment for Thermal Barrier Coatings: Tests for Measuring Mixed Mode Delamination Toughness,” J. Am. Ceram. Soc., 94 [ S1 ] S85 – 95 ( 2011 ).
dc.identifier.citedreferenceA. M. Limarga and D. R. Clarke, “ Piezo‐Spectroscopic Coefficients of Tetragonal‐Prime Yttria‐Stabilized Zirconia,” J. Am. Ceram. Soc., 90 [ 4 ] 1272 – 5 ( 2007 ).
dc.identifier.citedreferenceM. Tanaka, M. Hasegawa, A. F. Dericioglu, and Y. Kagawa, “ Measurement of Residual Stress in Air Plasma‐Sprayed Y 2 O 3 –ZrO 2 Thermal Barrier Coating System Using Micro‐Raman Spectroscopy,” Mater. Sci. Eng., A, 419, 262 – 8 ( 2006 ).
dc.identifier.citedreferenceM. Ahrens, R. Vaßen, and D. Stover, “ Stress Distributions in Plasma‐Sprayed Thermal Barrier Coatings as a Function of Interface Roughness and Oxide Scale Thickness,” Surf. Coat. Tech, 161, 26 – 35 ( 2002 ).
dc.identifier.citedreferenceX. Y. Gong and D. R. Clarke, “ On the Measurement of Strain in Coatings Formed on a Wrinkled Elastic Substrate,” Oxid. Met., 50 [ 516 ] 355 – 75 ( 1998 ).
dc.identifier.citedreferenceD. R. Clarke and S. R. Phillpot, “ Thermal Barrier Coating Materials,” Mater. Today, 82 [ 6 ] 22 – 9 ( 2005 ).
dc.identifier.citedreferenceN. Markocsan, P. Nylen, J. Wigren, and X. H. Li, “ Low Thermal Conductivity Coatings for Gas Turbine Application,” J. Therm. Spray. Techn, 16 [ 4 ] 498 – 505 ( 2007 ).
dc.owningcollnameInterdisciplinary and Peer-Reviewed


Files in this item

Name:
jace14360.pdf
Size:
1.194MB
Format:
PDF
View/Open
Name:
jace14360_am.pdf
Size:
618.6KB
Format:
PDF
View/Open

Show simple item record

Remediation of Harmful Language

The University of Michigan Library aims to describe library materials in a way that respects the people and communities who create, use, and are represented in our collections. Report harmful or offensive language in catalog records, finding aids, or elsewhere in our collections anonymously through our metadata feedback form. More information at Remediation of Harmful Language.

Accessibility

If you are unable to use this file in its current format, please select the Contact Us link and we can modify it to make it more accessible to you.