Deep Blue: Browsing Engineering, College of - Technical Reports by Title

Calibration report on the University of Michigan supersonic wind tunnel : part III, aerodynamic calibration at nomial Mach number on 2.84 : part IV, aerodynamic calibration at nominal Mach number of 1.44

Culbertson, Philip E. (1952)

(30.4KB)

(4.6MB)

A calorimeter for 300 GeV neutrons and protons

Jones, Lawrence W.; Gustafson, H. Richard; Chanowski, John Paul.; Longo, Michael J.; Skubic, P. L. (Patric Louis.); Stone, James L.; Cork, Bruce. (1973)

(16.5KB)

(879.9KB)

Calorimetric studies on argon and hexafluoro ethane and a generalized correlation of maxima in isobaric heat capacity

Kim, Kwan Young (1974)

(300.7KB)

(14.3MB)

CAMA (computer-aided mathematical analysis) : a general description

Wolf, Louis W. (Louis William) (1970)

(43.3KB)

(2.2MB)

CAMA : define problem command

Goodrich, Suzanne D. (1970)

(36KB)

(1.7MB)

The CAMA data structure

Julyk, L. J. (Larry James); Wolf, Louis W. (Louis William) (1970)

(82.7KB)

(3.7MB)

The CAMA interpreter

Dingwall, T. J. (Thomas J. ); Julyk, L. J. (Larry James); Wolf, Louis W. (Louis William) (1970)

(24.1KB)

(1MB)

The CAMA macro processor

Dingwall, T. J. (Thomas J. ); Julyk, L. J. (Larry James); Wolf, Louis W. (Louis William) (1970)

(50KB)

(2.2MB)

The CAMA operating system

Julyk, L. J. (Larry James) (1970)

(69.6KB)

(3.3MB)

Camera calibration and absolute check on photogrammetric tilt determination using star trails : technical report

Schmidt, Eldon; Young, Edward (1955)

(91.5KB)

(8.4MB)

Can setup reduction result in worse performance? Izak Duenyas, Mark P. Van Oyen.

Duenyas, Izak; Van Oyen, Mark Peter (1994)

(15.2KB)

(638.1KB)

Capability measurements for multivariate processes : definitions and an example for a gear carrier

Littig, Steven J.; Lam, C. Y. Teresa; Pollock, Stephen M. (1992)

(59.8KB)

(2.5MB)

Capacity expansion and replacement with uncertain technological breakthroughs Sampath Rajagopalan, Medini R. Singh.

Rajagopalan, Sampath; Chen, Lin-Lin.; Woo, Tony C. (1992)

(76KB)

(3.3MB)

Capacity expansion under stochastic demands

Higle, Julia L.; Bean, James C.; Smith, Robert L. (1984)

(31.9KB)

(1.4MB)

Capillary penetration of liquids between dissimilar solids

O'Brien, William Joseph (2000)

(95.1KB)

(5.3MB)

Carbon-molybdenum steel steam pipe after 100,000 hours of service

Sinnott, R. J.; Rohrig, I. A.; Freeman, James W.; Rush, A. I. (Adron I.) (1954)

(45KB)

(2.1MB)

Carburized final-drive pinion gears : final report

Schwartz, Frank Leroy; Eaton, Robert H. (1955)

(104.8KB)

(10.5MB)

Case studies in process capability measurement

Littig, Steven J. (1993)

(21.9KB)

(887.2KB)

A case study for automatic assembly : IBM 3178 logic unit

Isikbay, Napolyon. (1985)

(15.8KB)

(10.3MB)

A case study for robotic assembly : dualjet carburetor subassembly

Isikbay, Napolyon. (1985)

(30.3KB)

(1.8MB)

Case Study: How Modeling Revealed Serious Performance Problems in Distributed (DCE) Systems

Khandker, A. M.; Teorey, T. J. (Center for Information Technology Integration, 1996-06)

(199.3KB)

Cast iron base heat-resistant alloys : progress report

Kraft, R. Wayne (Ralph Wayne); Flinn, Richard Aloysius (1958)

(31.5KB)

(1.3MB)

Casting techniques for cunisibe metal : final report

Askeland, Donald R. (1968)

(100.7KB)

(21.9MB)

Cathode-ray oscillograph display system for use wih high-speed eletronic computers

Nay, Henry T. (1955)

(9.4KB)

(585.5KB)

Cavitating flow past transverse cylinder in venturi diffuser with water and mercury

Hammitt, Frederick G.; Kemppainen, D. J. (Dale J.) (1969)

(39.6KB)

(3.1MB)