View Item 

Show simple item record

Fatigue characterization of T300/924 polymer composites with voids under tension‐tension and compression‐compression cyclic loading
dc.contributor.authorLiu, H.
dc.contributor.authorCui, H.
dc.contributor.authorWen, W.
dc.contributor.authorKang, H.
dc.date.accessioned2018-03-07T18:24:13Z
dc.date.available2019-05-13T14:45:24Zen
dc.date.issued2018-03
dc.identifier.citationLiu, H.; Cui, H.; Wen, W.; Kang, H. (2018). "Fatigue characterization of T300/924 polymer composites with voids under tension‐tension and compression‐compression cyclic loading." Fatigue & Fracture of Engineering Materials & Structures 41(3): 597-610.
dc.identifier.issn8756-758X
dc.identifier.issn1460-2695
dc.identifier.urihttps://hdl.handle.net/2027.42/142461
dc.description.abstractFibrous polymer composites exhibit excellent properties such as high specific stiffness/strength and good fatigue performance. However, as inherent defects of polymer composites, voids have been reported to have an impact on their load‐bearing properties including fatigue resistance. In the interest of safety, the effect of voids on fatigue behaviours of composites should be understood and quantified. In this article, the effect of voids on the fatigue of T300/924 composites was evaluated in terms of their fatigue life, stiffness degradation, and cracks propagation under tension‐tension and compression‐compression loadings. The failure probability was assessed by Weibull distribution. Furthermore, crack measurement and fractographic analysis reveal that the effect of voids on the failure mechanisms of the material under various loading configurations could be different. Lastly, an analytical residual stiffness model was proposed, and a good correlation was obtained between the experimental data and the prediction results.
dc.publisherDefense Technical Information Center
dc.publisherWiley Periodicals, Inc.
dc.subject.othercrack density measurement
dc.subject.othereffect of voids
dc.subject.otherfatigue behaviours
dc.subject.otherpolymer composite
dc.titleFatigue characterization of T300/924 polymer composites with voids under tension‐tension and compression‐compression cyclic loading
dc.typeArticleen_US
dc.rights.robotsIndexNoFollow
dc.subject.hlbsecondlevelMaterials Science and Engineering
dc.subject.hlbtoplevelEngineering
dc.description.peerreviewedPeer Reviewed
dc.description.bitstreamurlhttps://deepblue.lib.umich.edu/bitstream/2027.42/142461/1/ffe12721_am.pdf
dc.description.bitstreamurlhttps://deepblue.lib.umich.edu/bitstream/2027.42/142461/2/ffe12721.pdf
dc.identifier.doi10.1111/ffe.12721
dc.identifier.sourceFatigue & Fracture of Engineering Materials & Structures
dc.identifier.citedreferenceCosta ML, de Almeida SM, Rezende MC. The influence of porosity on the interlaminar shear strength of carbon/epoxy and carbon/bismaleimide fabric laminates. Compos Sci Technol. 2001; 61: 2101 ‐ 2108.
dc.identifier.citedreferenceProtz R, Kosmann N, Gude M, Hufenbach W, Schulte K, Fiedler B. Voids and their effect on the strain rate dependent material properties and fatigue behaviour of non‐crimp fabric composites materials. Compos Part B‐Eng. 2015; 83: 346 ‐ 351.
dc.identifier.citedreferenceSchmidt F, Rheinfurth M, Horst P, Busse G. Multiaxial fatigue behaviour of GFRP with evenly distributed or accumulated voids monitored by various NDT methodologies. Int J Fatigue. 2012; 43: 207 ‐ 216.
dc.identifier.citedreferenceZhang A, Li D, Lu H, Zhang D. Qualitative separation of the effect of voids on the bending fatigue performance of hygrothermal conditioned carbon/epoxy composites. Mater Des. 2011; 32 ( 10 ): 4803 ‐ 4809.
dc.identifier.citedreferenceBathias C. An engineering point of view about fatigue of polymer matrix composite materials. Int J Fatigue. 2006; 28: 1094 ‐ 1099.
dc.identifier.citedreferenceSong J, Wen WD, Cui HT, Liu HL, Xu Y. Effects of temperature and fiber volume fraction on mechanical properties of T300/QY8911‐IV composites. J Reinf Plast Comp. 2014; 34 ( 2 ): 157 ‐ 172.
dc.identifier.citedreferenceAllah MH, Abdin EM, Selmy AI, Khashaba UA. Effect of fibre volume fraction on the fatigue behaviour of GRP pultruded rod composites. Compos Sci Technol. 1996; 56 ( 1 ): 23 ‐ 29.
dc.identifier.citedreferenceHuang X. Fabrication and properties of carbon fibers. Materials. 2009; 2 ( 4 ): 2369 ‐ 2403.
dc.identifier.citedreferenceHu Y, Lang AW, Li X, Nutt SR. Hygrothermal aging effects on fatigue of glass fiber/polydicyclopentadiene composites. Polym Degrad Stab. 2014; 110: 464 ‐ 472.
dc.identifier.citedreferenceZhang JY, Sun CQ, Zhao LB, Fei BJ. Experiment research of environment effects on fatigue life of carbon/bismaleimide composite laminates with central hole. Key Eng Mater. 2011; 452‐453: 525 ‐ 528.
dc.identifier.citedreferenceLiu L, Zhang BM, Wang DF, Wu ZJ. Effects of cure cycles on void content and mechanical properties of composite laminates. Compos Struct. 2006; 73: 303 ‐ 309.
dc.identifier.citedreferenceKoushyar H, Alavi‐Soltani S, Minaie B, Violette M. Effects of variation in autoclave pressure, temperature, and vacuum‐application time on porosity and mechanical properties of a carbon fiber/epoxy composite. J Compos Mater. 2011; 46 ( 16 ): 1985 ‐ 2004.
dc.identifier.citedreferenceLiebig WV, Viets C, Schulte K, Fiedler B. Influence of voids on the compressive failure behaviour of fibrereinforced composites. Compos Sci Technol. 2015; 117: 225 ‐ 233.
dc.identifier.citedreferenceSelmi A. Void effect on carbon fiber epoxy composites. 2nd International Conference on Emerging Trends in Engineering and Technology (ICETET’2014), London, May 30–31, 2014.
dc.identifier.citedreferenceBensadoun F, Vallons KAM, Lessard LB, Verpoest I, Van Vuure AW. Fatigue behaviour assessment of flax–epoxy composites. Compos Pt A Appl Sci Manuf. 2016; 82: 253 ‐ 266.
dc.identifier.citedreferenceGowayed Y, Ojard G, Santhosh U, Jefferson G. Modeling of crack density in ceramic matrix composites. J Compos Mater. 2015; 49 ( 18 ): 2285 ‐ 2294.
dc.identifier.citedreferenceShokrieh MM, Lessard LB. Progressive fatigue damage modeling of composite materials, part I: modeling. J Compos Mater. 2000; 34: 1056 ‐ 1080.
dc.identifier.citedreferenceShokrieh MM, Lessard LB. Progressive fatigue damage modeling of composite materials, part II: material characterization and model verification. J Compos Mater. 2000; 34: 1081 ‐ 1116.
dc.identifier.citedreferenceHarris B, Gathercole N, Lee JA, Reiter H, Adam T. Life‐prediction for constant‐stress fatigue in carbon‐fibre composites. Phil Trans R Soc Lond A. 1997; 355: 1259 ‐ 1294.
dc.identifier.citedreferenceReifsnider K. Fatigue behavior of composite materials. Int J Fract. 1980; 16 ( 6 ): 563 ‐ 583.
dc.identifier.citedreferenceJamison RD. Advanced Fatigue Damage Development in Graphite Epoxy Laminates. Fort Belvoir, VA: Defense Technical Information Center; 1982.
dc.identifier.citedreferenceMao H, Mahadevan S. Fatigue damage modelling of composite materials. Compos Struct. 2002; 58: 405 ‐ 410.
dc.identifier.citedreferenceGarbo SP, Ogonowski JM. Effect of variances and manufacturing tolerances on the design strength and life of mechanically fastened composite joints. AFWAL‐TR‐81‐3041 1981, vol. 1.
dc.identifier.citedreferencePrakash R. Significance of defects in the fatigue failure of carbon fibre reinforced plastics. Fibre Sci Technol. 1981; 14: 171 ‐ 181.
dc.identifier.citedreferencede Almeida SFM, Neto ZSN. Effect of void content on the strength of composite laminates. Compos Struct. 1994; 28 ( 2 ): 139 ‐ 148.
dc.identifier.citedreferenceLambert J, Chambers AR, Sinclair I, Spearing SM. 3D damage characterisation and the role of voids in the fatigue of wind turbine blade materials. Compos Sci Technol. 2012; 72 ( 2 ): 337 ‐ 343.
dc.identifier.citedreferenceSuhot MA, Chambers AR. The effect of voids on the flexural fatigue performance of unidirectional carbon fibre composites. 16th Int Conference on Composite Materials, Kyoto, Japan, 2007.
dc.identifier.citedreferenceChambers AR, Earl JS, Squires CA, Suhot MA. The effect of voids on the flexural fatigue performance of unidirectional carbon fibre composites developed for wind turbine applications. Int J Fatigue. 2006; 28: 1389 ‐ 1398.
dc.identifier.citedreferenceSisodia S, Gamstedt EK, Edgren F, Varna J. Effects of voids on quasi‐static and tension fatigue behaviour of carbon‐fibre composite laminates. J Compos Mater. 2015; 49 ( 17 ): 2137 ‐ 2148.
dc.owningcollnameInterdisciplinary and Peer-Reviewed


Files in this item

Name:
ffe12721_am.pdf
Size:
9.597MB
Format:
PDF
View/Open
Name:
ffe12721.pdf
Size:
1.231MB
Format:
PDF
View/Open

Show simple item record

Remediation of Harmful Language

The University of Michigan Library aims to describe library materials in a way that respects the people and communities who create, use, and are represented in our collections. Report harmful or offensive language in catalog records, finding aids, or elsewhere in our collections anonymously through our metadata feedback form. More information at Remediation of Harmful Language.

Accessibility

If you are unable to use this file in its current format, please select the Contact Us link and we can modify it to make it more accessible to you.