The strain amplification sensor: A 3D‐printable stand‐alone strain gauge for low‐cost monitoring
dc.contributor.author | Groden, Mark | |
dc.contributor.author | Zhang, Kaihua | |
dc.contributor.author | Collette, Matt | |
dc.date.accessioned | 2018-05-15T20:14:35Z | |
dc.date.available | 2019-07-01T14:52:17Z | en |
dc.date.issued | 2018-05 | |
dc.identifier.citation | Groden, Mark; Zhang, Kaihua; Collette, Matt (2018). "The strain amplification sensor: A 3D‐printable stand‐alone strain gauge for low‐cost monitoring." Structural Control and Health Monitoring 25(5): n/a-n/a. | |
dc.identifier.issn | 1545-2255 | |
dc.identifier.issn | 1545-2263 | |
dc.identifier.uri | https://hdl.handle.net/2027.42/143705 | |
dc.publisher | Riso National Laboratory | |
dc.publisher | Wiley Periodicals, Inc. | |
dc.subject.other | additive manufacturing | |
dc.subject.other | 3D printing | |
dc.subject.other | strain gauge | |
dc.subject.other | structural reliability | |
dc.subject.other | weld distortion | |
dc.title | The strain amplification sensor: A 3D‐printable stand‐alone strain gauge for low‐cost monitoring | |
dc.type | Article | en_US |
dc.rights.robots | IndexNoFollow | |
dc.subject.hlbtoplevel | Health Sciences | |
dc.description.peerreviewed | Peer Reviewed | |
dc.description.bitstreamurl | https://deepblue.lib.umich.edu/bitstream/2027.42/143705/1/stc2145_am.pdf | |
dc.description.bitstreamurl | https://deepblue.lib.umich.edu/bitstream/2027.42/143705/2/stc2145.pdf | |
dc.identifier.doi | 10.1002/stc.2145 | |
dc.identifier.source | Structural Control and Health Monitoring | |
dc.identifier.citedreference | K. Lim, L. Wong, W. K. Chiu, J. Kodikara. Struct. Control Health Monit. 2016, 23 ( 2 ), 303. | |
dc.identifier.citedreference | S. Laflamme, M. Kollosche, J. J. Connor, G. Kofod. Struct. Control Health Monit. 2012, 19 ( 1 ), 70. | |
dc.identifier.citedreference | O. J. D. Kristensen, R. Forskningscenter, Fundamentals for remote structural health monitoring of wind turbine blades ‐ a preproject, annex E: Full‐scale test of wind turbine blade, using sensors and NDT, Riso National Laboratory, Roskilde 2002. | |
dc.identifier.citedreference | T. Yi, H. Li, M. Gu. Sci. China Technol. Sci. 2010, 53 ( 2 ), 469. | |
dc.identifier.citedreference | M. B. Kane, C. Peckens, J. P. Lynch, in Sensor Technologies for Civil Infrastructures, Elsevier, Cambridge, United Kingdom 2014, pp. 446 – 479. https://doi.org/10.1533/9780857099136.446 | |
dc.identifier.citedreference | H. Choi, S. Choi, H. Cha, Structural Health Monitoring system based on strain gauge enabled wireless sensor nodes, IEEE June 2008, pp. 211. | |
dc.identifier.citedreference | J. J. McCullagh, T. Galchev, R. L. Peterson, R. Gordenker, Y. Zhang, J. Lynch, K. Najafi. Sens. Actuators A: Phys. 2014, 217, 139. | |
dc.identifier.citedreference | N. R. Johnson, J. P. Lynch, M. D. Collette. Struct. Infrastruct. Eng. 2017, 0 ( 0 ), 1. | |
dc.identifier.citedreference | St350 Strain Transducer, http://bditest.com/product/sensors/strain-sensors/bdi-strain-transducers/ Accessed: 2017‐11‐13. | |
dc.identifier.citedreference | D. Bak. Assembly Autom. 2003, 23 ( 4 ), 340. | |
dc.identifier.citedreference | R. Bogue. Assembly Autom. 2013, 33 ( 4 ), 307. | |
dc.identifier.citedreference | Y. Yagci, S. Jockusch, N. J. Turro. Macromolecules 2010, 43 ( 15 ), 6245. | |
dc.identifier.citedreference | F. P. W. Melchels, J. Feijen, D. W. Grijpma. Biomaterials 2010, 31 ( 24 ), 6121. | |
dc.identifier.citedreference | J. L. Amit, M. Eric, B. W. Ryan. Rapid Prototyping J. 2012, 18 ( 2 ), 129. | |
dc.identifier.citedreference | N. R. Mandal, P. Biswas. A review on development of weld induced distortion analysis, Marine Technology and Engineering, Two Volume Set (Eds: C. G. Soares, Y. Garbatov, N. Fonseca, A. P. Texeira ), CRC press, Lisbon 2012, 2, 901 – 908. | |
dc.identifier.citedreference | T. D. Huang, M. Harbison, L. Kvidahl, D. Niolet, J. Walks, J. P. Christein, M. Smitherman, M. Phillippi, P. Dong, L. DeCan, V. Caccese, P. Blomquist, D. Kihl, R. Wong, M. Sinfield, N. Nappi, J. Gardner, C. Wong, M. Bjornson, A. Manuel. J. Ship Prod. Des. 2016, 32 ( 1 ), 21. | |
dc.owningcollname | Interdisciplinary and Peer-Reviewed |
Files in this item
Remediation of Harmful Language
The University of Michigan Library aims to describe library materials in a way that respects the people and communities who create, use, and are represented in our collections. Report harmful or offensive language in catalog records, finding aids, or elsewhere in our collections anonymously through our metadata feedback form. More information at Remediation of Harmful Language.
Accessibility
If you are unable to use this file in its current format, please select the Contact Us link and we can modify it to make it more accessible to you.