Improved Interyarn Friction, Impact Response, and Stab Resistance of Surface Fibrilized Aramid Fabric

Abstract

Improvement of the ballistic performance of aramid fabric is an important topic in the study of soft body armors, especially with their increasing use in such applications over the past decades. To enhance and tailor the performance of fabrics, having control over one of its primary energy absorption mechanisms, interyarn friction, is required. Here, a recently reported surface fibrilization method is exploited and optimized to improve interyarn friction in aramid fabrics. Through tow pullout testing of fibrilized fabrics, the fibrilization treatment is shown to provide up to seven times higher pullout energy and six times higher peak load. To correlate the effects of the treatment on the ballistic response, impact tests are conducted on treated fabric targets using a gas gun setup. The fibrilized fabrics displayed a 10 m s‐1 increase in V50 velocity, compared to that of untreated fabrics, while retaining its original flexibility and mechanical strength. Similarly, the fibrilization treatment also resulted in 230% improvement in depth of penetration when dynamically stabbed using a spike impactor. The results demonstrate the potential of the proposed surface fibrilization treatment as a fast and cost‐effective technique to improve the ballistic and stab performance of aramid‐based soft body armors.This work shows improved interyarn, ballistic, and stab resistance properties in aramid fabric through a basic fibrilization treatment. The treated aramid fabrics display a maximum improvement of 665% in yarn pullout energy, a 10 m s−1 increase in V50 velocity, and 230% higher stab impact resistance, while maintaining its original tensile properties.