Inertial Focusing of Particles in Curved Micro-channels

Abstract

Inertial focusing is the migration of particles in flow laterally across a channel into well-defined equilibrium positions. In microfluidic channels, inertial focusing takes advantage of hydrodynamic interactions even at high flow speeds. Particle isolation through inertial focusing is a high throughput method of processing biological samples for point-of-care diagnostics. While photos provide qualitative analyses of inertial focusing, we desired quantitative characterization of these systems. In this study, we ran flow experiments, first with fluorescent polystyrene beads and later with cells in solution, through curved micro-channels at controlled rates using a syringe pump. Our results from polystyrene bead experiments confirmed previous studies on flow through curved micro-channels, in which particles are focused along both sides of the channel at low flow rates and transition towards the center of the channel as the flow rate increases. FWHM analysis also showed that the streamline width is minimized at an intermediate flow rate, indicating inertial focusing is optimized under that condition. As this method of analysis was confirmed with polystyrene beads, we further used this analysis method to characterize the focusing of cells in solution. To maximize both throughput and purity, microfluidic devices must be designed to operate at the highest flow rate at which effective separation from bulk fluid can occur. The device presented in this report indeed isolates the desired target cells to be studied in downstream characterization.