Recently added

Calorimetric Evidence For Polymorphous Constraints On Metastable Zr-Al Phase Formation By Mechanical Alloying

Ma, E.; Atzmon, Michael (American Institute of Physics, 1991)

(699.3KB)

The effect of compression and tension on shear-band structure and nanocrystallization in amorphous Al90Fe5Gd5 : a high-resolution transmission electron microscopy study

Jiang, W. H.; Atzmon, Michael (Elsevier, 2003)

(595.4KB)

Mechanical behavior of shear bands and the effect of their relaxation in a rolled amorphous Al-based allo

Jiang, W. H.; Pinkerton, F. E.; Atzmon, Michael (Elsevier, 2005)

(430.1KB)

Deformation-induced nanocrystallization in an Al-based amorphous alloy at a subambient temperature

Jiang, W. H.; Pinkerton, F. E.; Atzmon, Michael (Elsevier, 2003)

(164.2KB)

Mechanically-assisted nanocrystallization and defects in amorphous alloys: A high-resolution transmission electron microscopy study

Jiang, W. H.; Atzmon, Michael (Elsevier, 2006)

(252.4KB)

Kinetics of microstructure evolution in nanocrystalline Fe powder during mechanical attrition

Tian, H. H.; Atzmon, Michael (Elsevier, 1999)

(337.1KB)

Phase separation during co-deposition of Al-Ge thin films

Adams, C. D.; Atzmon, Michael; Cheng, Y. -T.; Srolovitz, David J. (Materials Research Society, 1992)

(3.3MB)

Plastic flow of a nanocrystalline/amorphous Al90Fe5Gd5 composite formed by rolling

Jiang, W. H.; Atzmon, Michael (Elsevier, 2006)

(179.8KB)

Comparison of X-ray analysis methods used to determine the grain size and strain in nanocrystalline materials

Tian, H. H.; Atzmon, Michael (Taylor & Francis, Ltd., 1999)

(940.6KB)

Monte-Carlo simulations of spinodal ordering and decomposition in compositionally modulated alloys

Atzmon, Michael (Materials Research Society, 1990)

(561.3KB)

Deformation-assisted decomposition of unstable Fe50Cu50 solid solution during low-energy ball milling

Xu, J.; Collins, G. S.; Peng, L. S. J.; Atzmon, Michael (Elsevier, 1999)

(430.3KB)

Effect of proton and Ne irradiation on the microstructure of Zircaloy 4

Zu, X. T.; Sun, K.; Atzmon, Michael; Wang, L. M.; You, L. P.; Wan, F. R.; Busby, J. T.; Was, Gary S.; Adamson, R. B. (Taylor & Francis, Ltd., 2005)

(1.1MB)

The interdependence of stress and interdiffusion during solid-state amorphization in Ni-Hf

Boyer, W. S. L.; Atzmon, Michael (Materials Research Society, 2000)

(216.1KB)

Rate dependence of serrated flow in an Al-based metallic glass

Jiang, W. H.; Atzmon, Michael (Materials Research Society, 2003)

(101.6KB)

Deformation-induced nanocrystallization - a comparison of two amorphous, Al-based, alloys

Jiang, W. H.; Pinkerton, F. E.; Atzmon, Michael (Materials Research Society, 2005)

(1.2MB)

Evidence for self-sustained MoSi2 formation during room-temperature high-energy ball milling of elemental powders

Ma, E.; Pagan, J.; Cranford, G.; Atzmon, Michael (Materials Research Society, 1993)

(1MB)

Calculation And Simulation of Chemical-Diffusion Coefficients - The Inadequacy of The Mean-Field Theory

Atzmon, Michael (American Institute of Physics, 1990)

(637.4KB)

In situ Thermal Observation of Explosive Compound-Formation Reaction During Mechanical Alloying

Atzmon, Michael (American Institute of Physics, 1990)

(736.6KB)

Formation And Growth of Amorphous Phases By Solid-State Reaction In Elemental Composites Prepared By Cold-Working

Atzmon, Michael; Verhoeven, John D.; Gibson, Edwin D.; Johnson, W. L. (American Institute of Physics, 1984)

(532.4KB)

Grain-boundary relaxation and its effect on plasticity in nanocrystalline Fe

Jang, D.; Atzmon, Michael (American Institute of Physics, 2006)

(673.8KB)

Recent submissions