Now showing items 21-30 of 79
A Brief Survey on Dredges
(University of Michigan, 1972-10-01)
Presented to Society of Naval Architects and Marine Engineers, Canadian Maritime Section, Saint John, New Brunswick, January 28, 1971.&&This paper is intended to familiarize the reader with the different types of dredges, ...
Interactive Midship Section Analysis Program Utilizing Both Graphics and Digitizer Input - SPIRAL Module Midship - Users Manual
(University of Michigan, 1979-06-01)
This module will analyze the structural midship section of a vessel once the user has inputed all flat and curved plate sections along with all longitudinal stiffners. Input is done by utilizing the graphics terminal and/or ...
Cost Estimating - Ship Design and Construction
(University of Michigan, 1970-07-01)
Prepared for The University of Michigan's Engineering Summer Conference on Economics in Ship Design, June 8-12, 1970, Ann Arbor, Michigan.&&The shipbuilder has to be involved in cost effectiveness studies because he needs ...
Great Lakes Winter Navigation -- Technical and Economic Analyses. Vol. IV: Strengthening of Steel Plates Using Ferrocement and Reinforced Concrete
(University of Michigan, 1974-06-01)
To determine the applicability of using ferrocement and reinforced concrete for ice strengthening ship hulls, thirty_four composite beams were constructed and tested. Beams were made of 1/4-inch steel plate reinforced with ...
Flutter-Like Oscillationas of a Planing Plate
(University of Michigan, 1973-07-01)
In the two-dimensional steady nonlinear problem of a planing plate, two distinct limiting flow regimes occur: In one, the usual planing problem, a jet (or spray) is thrown forward approximately parallel to the plate, whereas ...
The Wave Resistance of a Surfact Pressure Distribution in Unsteady Motion
(University of Michigan, 1970-01-01)
Economics of Great Lakes Bulk Carriers in Winter Operations
(University of Michigan, 1972-08-01)
Since April 1971 we have been engaged in a study of the economics of winter navigation on the Great Lakes. This has been done under a continuing contract with the Maritime Administrat•on's Office of Research and Development. ...
Analysis of Ferro-Cement in Bending
(University of Michigan, 1970-01-01)
My purpose in undertaking the work summarized in this paper has been to provide the designer with the basic information and methods with which to design ferro-cement structures. The premise throughout the paper is that the ...