View Item 

Show simple item record

Influence of Stress Ratio on the Elevated-Temperature Fatigue of a Silicon Carbide Fiber-Reinforced Silicon Nitride Composite
dc.contributor.authorHolmes, John W.en_US
dc.date.accessioned2010-04-01T15:00:35Z
dc.date.available2010-04-01T15:00:35Z
dc.date.issued1991-07en_US
dc.identifier.citationHolmes, John W. (1991). "Influence of Stress Ratio on the Elevated-Temperature Fatigue of a Silicon Carbide Fiber-Reinforced Silicon Nitride Composite." Journal of the American Ceramic Society 74(7): 1639-1645. <http://hdl.handle.net/2027.42/65470>en_US
dc.identifier.issn0002-7820en_US
dc.identifier.issn1551-2916en_US
dc.identifier.urihttps://hdl.handle.net/2027.42/65470
dc.format.extent880857 bytes
dc.format.extent3110 bytes
dc.format.mimetypeapplication/pdf
dc.format.mimetypetext/plain
dc.publisherBlackwell Publishing Ltden_US
dc.rights1991 by The American Ceramic Societyen_US
dc.subject.otherCompositesen_US
dc.subject.otherHot Pressingen_US
dc.subject.otherFatigueen_US
dc.subject.otherCreepen_US
dc.subject.otherSilicon Nitrideen_US
dc.titleInfluence of Stress Ratio on the Elevated-Temperature Fatigue of a Silicon Carbide Fiber-Reinforced Silicon Nitride Compositeen_US
dc.typeArticleen_US
dc.rights.robotsIndexNoFollowen_US
dc.subject.hlbsecondlevelMaterials Science and Engineeringen_US
dc.subject.hlbtoplevelEngineeringen_US
dc.description.peerreviewedPeer Revieweden_US
dc.contributor.affiliationumCeramic Composites Research Laboratory, Department of Mechanical Engineering, The University of Michigan, Ann Arbor, Michigan 48109–2125en_US
dc.description.bitstreamurlhttp://deepblue.lib.umich.edu/bitstream/2027.42/65470/1/j.1151-2916.1991.tb07152.x.pdf
dc.identifier.doi10.1111/j.1151-2916.1991.tb07152.xen_US
dc.identifier.sourceJournal of the American Ceramic Societyen_US
dc.identifier.citedreferenceE. Minford and K. M. Prewo, “ Fatigue of Silicon Carbide Reinforced Lithium-Alumino-Silicate Glass-Ceramics ”; pp. 561 – 70 in Tailoring Multiphase and Composite Ceramics. Edited by C. G. Patano and R. E. Messing. Plenum Press, New York, 1986.en_US
dc.identifier.citedreferenceK. M. Prewo, “ Fatigue and Stress Rupture of Silicon Carbide Fibre-Reinforced Glass Ceramics,” J. Mater. Sci., 22, 2695 – 701 ( 1987 ).en_US
dc.identifier.citedreferenceK. M. Prewo, B. Johnson, and S. Starrett, “ Silicon Carbide Fiber-Reinforced Glass Ceramic Composite Tensile Behavior at Elevated Temperature,” J. Mater. Sci., 24, 1373 – 79 ( 1989 ).en_US
dc.identifier.citedreferenceH. Sakamoto, K. Hironori, and T. Miyoshi, “ In Situ Observation of Fracture Behavior of SiC Fiber-Si 3 N 4 Matrix Composite,” J. Ceram. Soc. Jpn. (Int. Ed.), 95, 817 – 22 ( 1987 ).en_US
dc.identifier.citedreferenceJ. W. Holmes, T. Kotil, and W. T. Foulds, “ High Temperature Fatigue of SiC Fiber Reinforced Si 3 N 4 Ceramic Composites ”; pp. 176 – 82 in Symposium on High Temperature Composites. Technomic Publishing Company, Lancaster, PA ( 1989 ).en_US
dc.identifier.citedreferenceT. Kotil, J. W. Holmes, and M. Comninou, “ The Origin of Hysteresis During Cyclic Loading of Ceramic Matrix Composites,” J. Am. Ceram. Soc., 73 [ 7 ] 1879 – 83 ( 1990 ).en_US
dc.identifier.citedreferenceJ. W. Holmes and S. F. Shuler, “ Temperature Rise During Fatigue of Fiber-Reinforced Ceramics,” J. Mater. Sci. Lett., 9, 1290 – 91 ( 1990 ).en_US
dc.identifier.citedreferenceE. Y. Luh, R. H. Dauskardt, and R. O. Ritchie, “ Cyclic Fatigue-Crack Growth Behavior of Short Cracks in SiC-Reinforced LAS Glass-Ceramic Composite,” J. Mater. Sci. Lett., 9, 719 – 25 ( 1990 ).en_US
dc.identifier.citedreferenceC. Q. Rousseau, “ Monotonic and Cyclic Behavior of a Silicon Carbide/Calcium-Aluminosilicate Ceramic Composite ”; in Thermal and Mechanical Behavior of Metal Matrix and Ceramic Matrix Composites, ASTM STP 1080. Edited by J. M. Kennedy, H. H. Moeller, and W. S. Johnson. American Society for Testing and Materials, Philadelphia, PA, 1990, in press.en_US
dc.identifier.citedreferenceR. H. Dauskardt, W. Yu, and R. O. Ritchie, “ Fatigue Crack Propagation in Transformation-Toughened Zirconia Ceramic,” J. Am. Ceram. Soc., 70 [ 10 ] C-248 – C-252 ( 1987 ).en_US
dc.identifier.citedreferenceR. H. Dauskardt, D. B. Marshall, and R. O. Ritchie, “ Cyclic Fatigue Crack Propagation in Magnesia-Partially-Stabilized Zirconia Ceramics,” J. Am. Ceram. Soc., 23 [ 4 ] 893 – 903 ( 1990 ).en_US
dc.identifier.citedreferenceK. J. Bowman, P. E. Reyes-Morel, and I-W. Chen, “ Reversible Transformation Plasticity in Uniaxial Tension-Compression Cycling of Mg-PSZ ”; in Advanced Structural Ceramics, MRS Symposium Proceedings, Edited by P. F. Becher, M. V. Swain, and S. Somiya. Materials Research Society, Pittsburgh, PA, 1986.en_US
dc.identifier.citedreferenceW. Liu and I-W. Chen, “ Fatigue of Yttria-Stabilized Zirconia I: Fatigue Damage, Fracture Origins and Lifetime Prediction,” J. Am. Ceram. Soc., in press.en_US
dc.identifier.citedreferenceW. Liu and I-W. Chen, “ Fatigue of Yttria-Stabilized Zirconia II: Crack Propagation, Fatigue Striations and Short Crack Behavior,” J. Am. Ceram. Soc., in press.en_US
dc.identifier.citedreferenceA. G. Evans, “ Fatigue in Ceramics,” Int. J. Fract., 16 [ 10 ] 485 – 98 ( 1980 ).en_US
dc.identifier.citedreferenceA. G. Evans and M. Linzer, “ High Frequency Cyclic Crack Propagation in Ceramic Materials,” Int. J. Fract., 12 [ 2 ] 217 – 22 ( 1976 ).en_US
dc.identifier.citedreferenceL. E. Ewart and S. Suresh, “ Dynamic Fatigue Crack Growth in Polycrystalline Alumina under Cyclic Compression,” J. Mater. Sci. Lett., 4, 774 – 78 ( 1986 ).en_US
dc.identifier.citedreferenceL. E. Ewart and S. Suresh, “ Crack Propagation in Ceramics under Cyclic Loads,” J. Mater. Sci., 22, 1173 – 92 ( 1987 ).en_US
dc.identifier.citedreferenceD. A. J. Vaughan and F. Guiu, “ Cyclic Fatigue of Advanced Ceramics,” Proc. Br. Ceram. Soc., 39, 101 – 108 ( 1987 ).en_US
dc.identifier.citedreferenceA. A. Steffen, R. H. Dauskardt, and R. O. Ritchie, “ Cyclic Fatigue-Crack Propagation in Ceramics: Long and Small Crack Behavior ”; pp. 745 – 52 in FATIGUE 90, Proceedings of the Fourth International Conference on Fatigue and Fatigue Thresholds, Honolulu, Hawaii. Edited by H. Kitagawa and T. Tanaka. Materials and Component Engineering Publications Ltd., Birmingham, U.K., 1990.en_US
dc.identifier.citedreferenceL. S. Williams, “ Stress-Endurance of Sintered Alumina,” Trans. Br. Ceram. Soc., 55 [ 5 ] 287 – 312 ( 1956 ).en_US
dc.identifier.citedreferenceL. S. Williams ; Ch. 18 in Mechanical Properties of Engineering Ceramics. Edited by W. W. Kriegel and H. Palmour. Interscience, New York, 1961.en_US
dc.identifier.citedreferenceA. Grossmuller, V. Zelizko, and M. V. Swain, “ Fatigue Crack Growth in Ceramics Using a Compressive Loading Geometry,” J. Mater. Sci. Lett., 8, 29 – 31 ( 1989 ).en_US
dc.identifier.citedreferenceF. Guiu, “ Cyclic Fatigue of Polycrystalline Alumina in Direct Push-Pull,” J. Mater. Sci. Lett., 13 [ 6 ] 1157 – 361 ( 1978 ).en_US
dc.identifier.citedreferenceH. N. Ko, “ Fatigue Strength of Si 3 N 4 under Rotary Bending,” J. Mater. Sci. Lett., 5 [ 2 ] 175 – 77 ( 1987 ).en_US
dc.identifier.citedreferenceD. A. Krohn and D. P. H. Hasselman, “ Static and Cyclic Fatigue Behavior of a Polycrystalline Alumina,” J. Am. Ceram. Soc., 55 [ 4 ] 208 – 11 ( 1972 ).en_US
dc.identifier.citedreferenceD. Lewis and R. W. Rice, “ Comparison of Static, Cyclic and Thermal Shock Fatigue in Ceramic composites,” Ceram. Eng. Sci. Proc., 3 [ 9–10 ] 714 – 21 ( 1982 ).en_US
dc.identifier.citedreferenceM. J. Reece, F. Guiu, and M. F. R. Sammur, “ Cyclic Fatigue Crack Propagation in Alumina under Direct Tension-Compression Loading,” J. Am. Ceram. Soc., 72 [ 2 ] 348 – 52 ( 1989 ).en_US
dc.identifier.citedreferenceT. Kawakubo and K. Komeya, “ Static and Cyclic Fatigue Behavior of a Sintered Silicon Nitride at Room Temperature,” J. Am. Ceram. Soc., 70 [ 6 ] 400 – 405 ( 1987 ).en_US
dc.identifier.citedreferenceS. Suresh and J. R. Brockenbrough, “ Theory and Experiments of Fracture in Cyclic Compression; Single Phase Ceramics, Transforming Ceramics and Ceramic Composites,” Acta Metall., 36 [ 6 ] 1455 – 70 ( 1988 ).en_US
dc.identifier.citedreferenceS. Suresh, L. X. Han, and J. J. Petrovic, “ Fracture of Si 3 N 4 —SiC Whisker Composites under Cyclic Loads,” J. Am. Ceram. Soc., 71 [ 3 ] C-158 – C-161 ( 1988 ).en_US
dc.identifier.citedreferenceL. X. Han and S. Suresh, “ High Temperature Failure of an Alumina-Silicon Carbide Composite under Cyclic Loads: Mechanisms of Fatigue Crack-Tip Damage,” J. Am. Ceram. Soc., 72 [ 7 ] 1233 – 38 ( 1989 ).en_US
dc.identifier.citedreferenceJ.-F. LeCostaouec, Textron Specialty Materials, Lowell, MA; personal communication, February, 1990.en_US
dc.identifier.citedreferenceR. T. Bhatt, “ Oxidation Effects on the Mechanical Properties of SiC Fiber-Reinforced Reaction-Bonded Silicon Nitride Matrix Composites,” NASA Technical Memorandum 102360. National Aeronautics and Space Administration, Washington, DC, 1989.en_US
dc.identifier.citedreferenceR. T. Bhatt, “ Laminate Behavior for SiC Fiber-Reinforced Reaction-Bonded Silicon Nitride Matrix Composites,” NASA Technical Memorandum 101350. National Aeronautics and Space Administration, Washington, DC, 1988.en_US
dc.identifier.citedreference36 ASTM Annual Book of Standards, Vol. 3.01 ; p. 255. American Society for Testing and Materials, Philadelphia, PA, 1988.en_US
dc.identifier.citedreferenceJ. A. DiCarlo, “ Creep of Chemically Vapour Deposited SiC Fibers,” J. Mater. Sci., 21, 217 – 24 ( 1986 ).en_US
dc.identifier.citedreferenceJ. A. DiCarlo, “ High Temperature Properties of CVD Silicon Carbide Fibers ”; presented at the International Conference of Whisker- and Fiber-Toughened Ceramics (Oak Ridge, TN, June 7–9, 1988 ).en_US
dc.identifier.citedreferenceR. Kossowsky, D. G. Miller, and E. S. Diaz, “ Tensile and Creep Strengths of Hot-Pressed Si 3 N 4,” J. Mater. Sci., 10, 983 – 97 ( 1975 ).en_US
dc.identifier.citedreferenceJ. W. Holmes, “ Tensile and Creep Behavior of Fiber-Reinforced SiC f /Si 3 N 4 Composites ”; presented at the 6th Annual ASM/ESD Conference on Advanced Composites (Detroit, MI, October 8–11, 1990 ).en_US
dc.identifier.citedreferenceD. B. Marshall and A. G. Evans, “ Failure Mechanisms in Ceramic-Fiber/Ceramic-Matrix Composites,” J. Am. Ceram. Soc., 68 [ 5 ] 225 – 31 ( 1985 ).en_US
dc.identifier.citedreferenceY. Park and J. W. Holmes, “ Finite Element Modelling of the Tensile Creep Behavior of SiC-Fiber Si 3 N 4 -Matrix Composites,” J. Mater. Sci., in review.en_US
dc.owningcollnameInterdisciplinary and Peer-Reviewed


Files in this item

Name:
j.1151-2916.1991.tb07152.x.pdf
Size:
860.2KB
Format:
PDF
View/Open

Show simple item record

Remediation of Harmful Language

The University of Michigan Library aims to describe library materials in a way that respects the people and communities who create, use, and are represented in our collections. Report harmful or offensive language in catalog records, finding aids, or elsewhere in our collections anonymously through our metadata feedback form. More information at Remediation of Harmful Language.

Accessibility

If you are unable to use this file in its current format, please select the Contact Us link and we can modify it to make it more accessible to you.