Fatigue of Yttria-Stabilized Zirconia: I, Fatigue Damage, Fracture Origins, and Lifetime Prediction
dc.contributor.author | Liu, Shih-Yu | en_US |
dc.contributor.author | Chen, I-Wei | en_US |
dc.date.accessioned | 2010-04-01T15:19:09Z | |
dc.date.available | 2010-04-01T15:19:09Z | |
dc.date.issued | 1991-06 | en_US |
dc.identifier.citation | Liu, Shih-Yu; Chen, I-Wei (1991). "Fatigue of Yttria-Stabilized Zirconia: I, Fatigue Damage, Fracture Origins, and Lifetime Prediction." Journal of the American Ceramic Society 74(6): 1197-1205. <http://hdl.handle.net/2027.42/65792> | en_US |
dc.identifier.issn | 0002-7820 | en_US |
dc.identifier.issn | 1551-2916 | en_US |
dc.identifier.uri | https://hdl.handle.net/2027.42/65792 | |
dc.format.extent | 1137286 bytes | |
dc.format.extent | 3110 bytes | |
dc.format.mimetype | application/pdf | |
dc.format.mimetype | text/plain | |
dc.publisher | Blackwell Publishing Ltd | en_US |
dc.rights | 1991 by The American Ceramic Society | en_US |
dc.subject.other | Fatigue | en_US |
dc.subject.other | Fracture | en_US |
dc.subject.other | Zirconia | en_US |
dc.subject.other | Cracks | en_US |
dc.subject.other | Stress | en_US |
dc.title | Fatigue of Yttria-Stabilized Zirconia: I, Fatigue Damage, Fracture Origins, and Lifetime Prediction | en_US |
dc.type | Article | en_US |
dc.rights.robots | IndexNoFollow | en_US |
dc.subject.hlbsecondlevel | Materials Science and Engineering | en_US |
dc.subject.hlbtoplevel | Engineering | en_US |
dc.description.peerreviewed | Peer Reviewed | en_US |
dc.contributor.affiliationum | Department of Materials Science and Engineering, The University of Michigan, Ann Arbor, Michigan 48109–2136 | en_US |
dc.description.bitstreamurl | http://deepblue.lib.umich.edu/bitstream/2027.42/65792/1/j.1151-2916.1991.tb04088.x.pdf | |
dc.identifier.doi | 10.1111/j.1151-2916.1991.tb04088.x | en_US |
dc.identifier.source | Journal of the American Ceramic Society | en_US |
dc.identifier.citedreference | D. A. Krohn and D. P. H. Hasselman, “ Static and Cyclic Fatigue Behavior of a Polycrystalline Alumina,” J. Am. Ceram. Soc., 55 [ 4 ] 208 – 11 ( 1972 ). | en_US |
dc.identifier.citedreference | C. P. Chen and W. J. Knapp, “ Fatigue Fracture of an Alumina Ceramic at Several Temperatures ”; pp. 691 – 707 in Fracture Mechanics of Ceramics, Vol. 2. Edited by R. C. Bradt, A. G. Evans, D. P. H. Hasselman, and F. F. Lange, Plenum Press, New York, 1973. | en_US |
dc.identifier.citedreference | R. Kossowsky, “ Cyclic Fatigue of Hot-Pressed Si 3 N 4,” J. Am. Ceram. Soc., 56 [ 10 ] 531 – 55 ( 1973 ). | en_US |
dc.identifier.citedreference | H. N. Ko, “ Fatigue Strength of Sintered Al 2 O 3 under Rotary Bending,” J. Mater. Sci. Lett., 5, 464 – 66 ( 1986 ). | en_US |
dc.identifier.citedreference | H. N. Ko, “ Cyclic Fatigue Behavior of Sintered Al 2 O 3 under Rotary Bending,” J. Mater. Sci. Lett., 6, 801 – 805 ( 1987 ). | en_US |
dc.identifier.citedreference | I. Maekawa, H. Shibata, and A. Kobayashi, “ Bending Fatigue of Al 2 O 3 —ZrO 2 Ceramics,” J. Soc. Mater. Sci., Jpn., 36 [ 409 ] 1116 – 27 ( 1987 ). | en_US |
dc.identifier.citedreference | M. V. Swain and V. Zelizko, “ Comparison of Static and Cyclic Fatigue on Mg-PSZ Alloys ”; pp. 595 – 606 in Advances in Ceramics, Vol. 24B, Science and Technology of Zirconia III. Edited by S. SÖmiya, N. Yamamoto, and H. Hanagida. American Ceramic Society, Westerville, OH, 1988. | en_US |
dc.identifier.citedreference | V. Zelizko and M. V. Swain, “ Influences of Surface Preparation on the Rotating Flexural Fatigue of Mg-PSZ,” J. Mater. Sci., 23, 1077 – 82 ( 1988 ). | en_US |
dc.identifier.citedreference | M. Takatsu, H. Kamiya, K. Ohya, K. Ogura, and T. Kinoshita, “ Effect of Vibrated Cyclic Fatigue Properties of Ceramics from Stress Load Condition,” J. Jpn. Ceram. Soc., 96 [ 10 ] 990 – 96 ( 1988 ). | en_US |
dc.identifier.citedreference | L. A. Sylva and S. Suresh, “ Crack Growth in Transforming Ceramics under Cyclic Tensile Loads,” J. Mater. Sci., 24, 1729 – 38 ( 1989 ). | en_US |
dc.identifier.citedreference | M. Masuda, N. Yamada, T. Soma, M. Matsui, and I. Oda, “ Fatigue of Ceramics (Part 2)—Cyclic Fatigue Properties of Sintered Si 3 N 4 at Room Temperature,” J. Jpn. Ceram. Soc., 97 [ 5 ] 520 – 24 ( 1989 ). | en_US |
dc.identifier.citedreference | H. Kamiya, M. Takatsu, K. Ohya, M. Ando, and A. Hattori, “ Effect of Microstructure on Cyclic Fatigue Properties of Al 2 O 3 Composites,” J. Jpn. Ceram. Soc., 98 [ 5 ] 456 – 63 ( 1990 ). | en_US |
dc.identifier.citedreference | M. Takatsu, K. Ohya, and M. Ando, “ The Relationship between Cyclic Fatigue Properties and Microstructures of Sintered Silicon Nitride Ceramics,” J. Jpn. Ceram. Soc., 98 [ 5 ] 490 – 98 ( 1990 ). | en_US |
dc.identifier.citedreference | A. A. Steffen, R. H. Dauskardt, and R. O. Ritchie, “ Cyclic Fatigue-Crack Propagation in Ceramics: Long and Small Crack Behavior ”; pp. 745 – 52 in Fatigue 90, Proceedings of the Fourth International Conference on Fatigue and Fatigue Thresholds. Edited by H. Kitagawa and T. Tanaka. Materials and Component Engineering Publications Ltd., Birmingham U.K., 1990. | en_US |
dc.identifier.citedreference | D. C. Cardona and C. J. Beevers, “ Fatigue Behavior of Zirconia–Ceria Alloys ”; pp. 1023 – 29 in Fatigue 90, Proceedings of the Fourth International Conference on Fatigue and Fatigue Thresholds. Edited by H. Kitagawa and T. Tanaka. Materials and Component Engineering Publications Ltd., Birmingham, U.K., 1990. | en_US |
dc.identifier.citedreference | R. H. Dauskardt, W. Yu, and R. O. Ritchie, “ Fatigue Crack Propagation in Transformation-Toughened Zirconia Ceramic,” J. Am. Ceram. Soc., 70 [ 10 ] C-248 – C-252 ( 1987 ). | en_US |
dc.identifier.citedreference | M. J. Reece, F. Guiu, and M. F. R. Sammur, “ Cyclic Fatigue Crack Propagation in Alumina under Direct Tension–Compression Loading,” J. Am. Ceram. Soc., 72 [ 2 ] 348 – 52 ( 1989 ). | en_US |
dc.identifier.citedreference | R. H. Dauskardt, D. B. Marshall, and R. O. Ritchie, “ Cyclic Fatigue–Crack Propagation in Magnesia-Partially-Stabilized Zirconia Ceramics,” J. Am. Ceram. Soc., 73 [ 4 ] 893 – 903 ( 1990 ). | en_US |
dc.identifier.citedreference | H. Kishimoto, A. Ueno, and H. Kawamoto, “ Crack Propagation Behavior of Si 3 N 4 under Cyclic Loads—Influence of Difference in Materials ”; pp. 727 – 32 in Fatigue 90, Proceedings of the Fourth International Conference on Fatigue and Fatigue Thresholds. Edited by H. Kitagawa and T. Tanaka. Materials and Component Engineering Publications Ltd., Birmingham, U.K., 1990. | en_US |
dc.identifier.citedreference | A. Ueno, H. Kishimoto, H. Kawamoto, and M. Asakura, “ Crack Propagation Behavior of Sintered Silicon Nitride under Cyclic Load of High Stress Ratio and High Frequency ”; pp. 733 – 38 in Fatigue 90, Proceedings of the Fourth International Conference on Fatigue and Fatigue Thresholds. Edited by H. Kitagawa and T. Tanaka. Materials and Component Engineering Publications Ltd., Birmingham, U.K., 1990. | en_US |
dc.identifier.citedreference | R. H. Dauskardt, W. C. Carter, D. K. Veirs, and R. O. Ritchie, “ Transient Subcritical Crack-Growth Behavior in Transformation-Toughened Ceramics,” Acta Metall., in press. | en_US |
dc.identifier.citedreference | J. F. Tsai, C. S. Yu, and D. K. Shetty, “ Fatigue Crack Propagation in Ceria-Partially-Stabilized Zirconia (Ce-TZP)–Alumina Composites,” J. Am. Ceram. Soc., 73 [ 10 ] 2992 – 3001 ( 1990 ). | en_US |
dc.identifier.citedreference | R. W. Hertzberg, Deformation and Fracture Mechanics of Engineering Materials, 3d ed. ; pp. 475 – 604. Wiley, New York, 1989. | en_US |
dc.identifier.citedreference | S.-Y. Liu and I-W. Chen, “ Fatigue of Yttria-Stabilized Zirconia: II, Crack Propagation, Fatigue Striations, and Short-Crack Behavior,” J. Am. Ceram. Soc., 74 [ 6 ] 1206 – 16 ( 1991 ). | en_US |
dc.identifier.citedreference | M. Masuda, T. Soma, M. Matsui, and I. Oda, “ Fatigue of Ceramics (Part I)—Fatigue Behavior of Sintered Si 3 N 4 under Tension–Compression Cyclic Stress,” J. Jpn. Ceram. Soc., 96 [ 3 ] 277 – 83 ( 1988 ). | en_US |
dc.identifier.citedreference | K. C. Liu, “ Tensile Cyclic Fatigue of Structural Ceramics,” Proc. 24th Auto. Tech. Development Contractor's Coordination Meeting, 279 – 83 ( 1985 ). | en_US |
dc.identifier.citedreference | K. J. Bowman, P. E. Reyes-Morel, and I.-W. Chen, “ Reversible Transformation Plasticity in Uniaxial Tension–Compression Cycling of Mg-PSZ,” Mater. Res. Soc. Symp. Proc., 78, 51 – 58 ( 1987 ). | en_US |
dc.identifier.citedreference | I-W. Chen and P. E. Reyes-Morel, “ Transformation Plasticity and Transformation Toughening in Mg-PSZ and Ce-TZP,” Mater. Res. Soc. Symp. Proc., 78, 75 – 88 ( 1987 ). | en_US |
dc.identifier.citedreference | I-W. Chen and P. E. Reyes-Morel, “ Implications of Transformation Plasticity in ZrO 2 -Containing Ceramics: I, Shear and Dilatation Effects,” J. Am. Ceram. Soc., 69 [ 3 ] 181 – 89 ( 1986 ). | en_US |
dc.identifier.citedreference | P. E. Reyes-Morel and I-W. Chen, “ Transformation Plasticity of CeO 2 -Stabilized Tetragonal Zirconia Polycrystals: I, Stress Assistance and Autocatalysis,” J. Am. Ceram. Soc., 71 [ 5 ] 343 – 53 ( 1988 ). | en_US |
dc.identifier.citedreference | J. Lankford, R. A. Page, and L. Rabenberg, “ Deformation Mechanisms in Yttria-Stabilized Zirconia,” J. Mater. Sci., 23, 4144 – 56 ( 1988 ). | en_US |
dc.identifier.citedreference | T. Masaki and K. Shinjo, “ Mechanical Behavior of ZrO 2 —Y 2 O 3 Ceramics Formed by Hot Isostatic Pressing ”; pp. 709 – 20 in Advances in Ceramics, Vol. 24B, Science and Technology of Zirconia III. Edited by S. SÖmiya, N. Yamamoto, and H. Hanagida. American Ceramic Society, Westerville, OH, 1988. | en_US |
dc.identifier.citedreference | K. Tsukuma and T. Takahata, “ Mechanical Property and Microstructure of TZP and TZP/Al 2 O 3 Composites,” Mater. Res. Soc. Symp. Proc., 78, 123 – 35 ( 1987 ). | en_US |
dc.identifier.citedreference | 34 ASTM Standard E.606-80, “ Standard Recommended Practice for Constant-Amplitude Low Cycle Fatigue Testing ”; pp. 652 – 69 in ASTM Annual Book of Standards, Vol. 3.01. American Society for Testing and Materials, Philadelphia, PA, 1983. | en_US |
dc.identifier.citedreference | B. W. Christ and S. R. Swanson, “ Alignment Problems in the Tensile Test,” J. Test. Eval., 4 [ 6 ] 405 – 17 ( 1976 ). | en_US |
dc.identifier.citedreference | H. Nisitani and Y. Murakami, “ Stress Intensity Factors of an Elliptical Crack or a Semi-Elliptical Crack Subject to Tension,” Int. J. Fract., 10 [ 3 ] 353 – 68 ( 1974 ). | en_US |
dc.identifier.citedreference | S. Suresh and J. R. Brockenbrough, “ Theory and Experiments of Fracture in Cyclic Compression: Single Phase Ceramics, Transforming Ceramics and Ceramic Composites,” Acta Metall., 36 [ 6 ] 1455 – 70 ( 1988 ). | en_US |
dc.identifier.citedreference | P. E. Reyes-Morel and I-W. Chen, “ Stress-Biased Anisotropic Microcracking in Zirconia Polycrystals,” J. Am. Ceram. Soc., 73 [ 4 ] 1026 – 33 ( 1990 ). | en_US |
dc.identifier.citedreference | J. E. Blendell and R. L. Coble, “ Measurement of Stress Due to Thermal Expansion Anisotropy in Al 2 O 3,” J. Am. Ceram. Soc., 65 [ 3 ] 174 – 78 ( 1982 ). | en_US |
dc.identifier.citedreference | D. B. Marshall and M. V. Swain, “ Reversible Transformation and Elastic Anisotropy in Mg—ZrO 2,” J. Am. Ceram. Soc., 72 [ 8 ] 1530 – 32 ( 1989 ). | en_US |
dc.owningcollname | Interdisciplinary and Peer-Reviewed |
Files in this item
Remediation of Harmful Language
The University of Michigan Library aims to describe library materials in a way that respects the people and communities who create, use, and are represented in our collections. Report harmful or offensive language in catalog records, finding aids, or elsewhere in our collections anonymously through our metadata feedback form. More information at Remediation of Harmful Language.
Accessibility
If you are unable to use this file in its current format, please select the Contact Us link and we can modify it to make it more accessible to you.