Show simple item record

Materials Science

dc.contributor.authorYu, Po-Wenen_US
dc.contributor.authorKoran, Andrewen_US
dc.contributor.authorCraig, Robert G.en_US
dc.date.accessioned2010-04-13T18:41:09Z
dc.date.available2010-04-13T18:41:09Z
dc.date.issued1980en_US
dc.identifier.citationYu, R.; Koran, A.; Craig, R.G. (1980). "Materials Science." Journal of Dental Research 7(59): 1141-1148. <http://hdl.handle.net/2027.42/66617>en_US
dc.identifier.issn0022-0345en_US
dc.identifier.urihttps://hdl.handle.net/2027.42/66617
dc.description.abstractThe effects of accelerated aging on a pigmented elastomer were evaluated by using a weathering chamber. Silastic 44210, a maxillofacial material with proven color and physical property stability, was chosen for pigmentation with 11 maxillofacial pigments. The values of ultimate tensile strength, maximum percent elongation, shear strength, Shore A hardness, and permanent deformation were determined for the pigmented elastomer before and after accelerated aging for 900 h. Results obtained indicate that the incorporation of 0.2% by weight of pigments can alter the physical and mechanical properties of the base elastomer. Accelerated aging had no effect on the physical properties of the pigment/elastomer combinations.en_US
dc.format.extent3108 bytes
dc.format.extent536861 bytes
dc.format.mimetypetext/plain
dc.format.mimetypeapplication/pdf
dc.publisherSAGE Publicationsen_US
dc.titleMaterials Scienceen_US
dc.typeArticleen_US
dc.subject.hlbsecondlevelDentistryen_US
dc.subject.hlbtoplevelHealth Sciencesen_US
dc.description.peerreviewedPeer Revieweden_US
dc.contributor.affiliationumThe University of Michigan, School of Dentistry, Ann Arbor, Michigan 48109en_US
dc.contributor.affiliationumThe University of Michigan, School of Dentistry, Ann Arbor, Michigan 48109en_US
dc.contributor.affiliationumThe University of Michigan, School of Dentistry, Ann Arbor, Michigan 48109en_US
dc.description.bitstreamurlhttp://deepblue.lib.umich.edu/bitstream/2027.42/66617/2/10.1177_00220345800590070801.pdf
dc.identifier.doi10.1177/00220345800590070801en_US
dc.identifier.citedreferenceCantor, R.; Webber, R.L.; Stroud, L.; and Ryge, G.: Methods for Evaluating Prosthetic Facial Materials, J Prosth Dent 21:324-332,1969.en_US
dc.identifier.citedreferenceWalter, J.G. : A Material for Retentive Obturators, Dent Practit 20:208-212, 1970.en_US
dc.identifier.citedreferenceChalian, V.A. ; Drane, J.B.; and Stan-Dish, S.M.: Maxillofacial Prosthetics, Baltimore : Williams and Wilkins Co., 1971, p. 283.en_US
dc.identifier.citedreferenceSweeney, W.T. ; Fischer, T.E.; Castle-Berry, D.J.; and Cowperthwaite, G.F.: Evaluation of Improved Maxillofacial Prosthetic Materials, J Prosth Dent 27:296-305, 1972.en_US
dc.identifier.citedreferenceGoldberg, A.J. : Polyurethane Elastomers as Maxillofacial Prosthetic Materials, Dissertation, University of Michigan, Ann Arbor, 1977.en_US
dc.identifier.citedreferenceLewis, D.H.; Cowsar, D.R.; Castle-Berry, D.J.; and Fischer, T.E.: New and Improved Elastomers for Extra-oral Maxillofacial Prostheses, IADR Progr & Abst 56: No. 174, 1977.en_US
dc.identifier.citedreferenceFine, L.: Color and Its Application in Maxillofacial Prosthetics, J Prosth Dent 39:188-192,1978.en_US
dc.identifier.citedreferenceFine, L.; Robinson, J.E.; Barnhart, G.W.; and Karl, L.: New Method for Coloring Facial Prostheses, J Prosth Dent 39: 643-649, 1978.en_US
dc.identifier.citedreferenceCraig, R.G.; Koran, A.; and Yu, R.: Color Stability of Elastomers for Maxillofacial Appliances, J Dent Res 57:866-871, 1978.en_US
dc.identifier.citedreferenceYu, R.; Koran, A.; and Craig, R.G.: Physical Properties of Elastomers for Maxillofacial Appliances Under Accelerated Aging, AADR Progr & Abst 56: No. 150, 1977.en_US
dc.identifier.citedreferenceKoran, A.; Yu, R.; Powers, J.M.; and Craig, R.G.: Color Stability of Pigmented Elastomer for Maxillofacial Appliances, J Dent Res 58:1450-1454, 1979.en_US
dc.identifier.citedreferenceAnnual Book of ASTM Standards, Plastics- General Test Methods; Nomenclature, Philadelphia, PA: American Society of Testing and Materials, 1977, p. 273.en_US
dc.identifier.citedreferenceJudd, D.B. and Wyszecki, G.: Color in Business, Science and Industry, New York : Wiley and Sons, Inc., 1975, p. 553.en_US
dc.identifier.citedreferenceGuenther, W.C.: Analysis of Variance, Englewood Cliffs, NJ: Prentice-Hall, 1964, p. 199.en_US
dc.identifier.citedreferenceDannenberg, E.M. : The Effects of Surface Chemical Interactions on the Properties of Filler-reinforced Rubber, Rubber Chem and Tech 48:410-444, 1975.en_US
dc.identifier.citedreferenceDeanin, R.D. and Schott, N.R.: Fillers and Reinforcements for Plastics, Washington, D.C. : American Chemical Society, 1974.en_US
dc.identifier.citedreferenceBillmeyer, F.W.: Textbook of Polymer Science, 2nd edition, New York: John Wiley and Sons, Inc., 1971, p. 544en_US
dc.identifier.citedreferenceFlory, P.J.: Principles of Polymer Chemistry, Ithaca, New York : Cornell University Press, 1953, p. 480.en_US
dc.identifier.citedreferenceFordham, S.: Silicones, New York: Philosophical Library, Inc., 1961, p. 162.en_US
dc.identifier.citedreferenceNoll, W.: Chemistry and Technology of Silicones, New York : Academic Press, 1968, p. 403.en_US
dc.identifier.citedreferenceYu, C.U. and Mark, J.E.: Specific Diluent Effects in Swollen Polymer Networks, Macromolecules 7:229, 1974.en_US
dc.owningcollnameInterdisciplinary and Peer-Reviewed


Files in this item

Show simple item record

Remediation of Harmful Language

The University of Michigan Library aims to describe library materials in a way that respects the people and communities who create, use, and are represented in our collections. Report harmful or offensive language in catalog records, finding aids, or elsewhere in our collections anonymously through our metadata feedback form. More information at Remediation of Harmful Language.

Accessibility

If you are unable to use this file in its current format, please select the Contact Us link and we can modify it to make it more accessible to you.