View Item 

Show simple item record

Resin Flow During the Cure of Fiber Reinforced Composites
dc.contributor.authorSpringer, George S.en_US
dc.date.accessioned2010-04-13T19:56:53Z
dc.date.available2010-04-13T19:56:53Z
dc.date.issued1982en_US
dc.identifier.citationSpringer, George (1982). "Resin Flow During the Cure of Fiber Reinforced Composites." Journal of Composite Materials 16(5): 400-410. <http://hdl.handle.net/2027.42/67928>en_US
dc.identifier.issn0021-9983en_US
dc.identifier.urihttps://hdl.handle.net/2027.42/67928
dc.description.abstractExperiments were performed studying resin flow during the cure of fiber reinforced, organic matrix composites using a system in which the resin was simulated by viscous liquids and the fibers either by layers of thin rods or by layers of porous plates. The flow pattern was observed and the flow rate was measured for different applied pressures. The data were compared to the results of the Springer-Loos model and excellent agreement was found bet ween the data and the model.en_US
dc.format.extent3108 bytes
dc.format.extent697034 bytes
dc.format.mimetypetext/plain
dc.format.mimetypeapplication/pdf
dc.publisherSage Publicationsen_US
dc.titleResin Flow During the Cure of Fiber Reinforced Compositesen_US
dc.typeArticleen_US
dc.subject.hlbsecondlevelAerospace Engineeringen_US
dc.subject.hlbtoplevelEngineeringen_US
dc.description.peerreviewedPeer Revieweden_US
dc.contributor.affiliationumDepartment of Mechanical Engineering and Applied Mechanics The University of Michigan, Ann Arbor, Michigan 48109en_US
dc.description.bitstreamurlhttp://deepblue.lib.umich.edu/bitstream/2027.42/67928/2/10.1177_002199838201600505.pdf
dc.identifier.doi10.1177/002199838201600505en_US
dc.identifier.sourceJournal of Composite Materialsen_US
dc.identifier.citedreferenceProgelhof, R.C. and Throne, J.L., "Non-Isothermal Curing of Reactive Plastics," Polymer Engineering and Science, Vol. 15, 1975, pp. 690-695.en_US
dc.identifier.citedreferenceBroyer, E. and Macosko, C.W., "Heat Transfer and Curing in Polymer Reaction Molding," AICh E Journal, Vol. 22, 1976, pp. 268-276.en_US
dc.identifier.citedreferenceAdabbo, H.E., Rojas, A.J., and Williams, R.J.J., "Critical Parameters for Thermoset Curing in Heated Molds," Polymer Engineering and Science, Vol. 19, 1979, pp. 835-840.en_US
dc.identifier.citedreferenceStolin, A.N., Merzhanov, A.G., and Malkin, A. Ya., "Non-Isothermal Phenomena in Polymer Engineering and Science: A Review. Part 1: Non-Isothermal Polymerization," Polymer Engineering and Science, Vol. 19, 1979, pp. 1065-1073.en_US
dc.identifier.citedreferenceBarone, M.R. and Caulk, D.A., "The Effect of Deformation and Thermoset Cure on Heat Conduction in a Chopped-Fiber Reinforced Polyester During Compression Molding," International Journal of Heat and Mass Transfer, Vol. 22, 1979, pp. 1021-1032.en_US
dc.identifier.citedreferenceLoos, A.C. and Springer, G.S., "Calculation of Cure Process Variables During Cure of Graphite-Epoxy Composites," Composite Materials: Quality Assurance and Processing. C.E. Browning, Ed. ASTM STP 787, 1983, pp. 110-118.en_US
dc.identifier.citedreferenceSpringer, G.S., "A Model of the Curing Process of Epoxy Matrix Composites," Progress in Science and Engineering of Composites, T. Hayashi, K. Kawata, and S. Umekawa Eds. Japan Society of Composite Materials, 1982, pp. 23-35.en_US
dc.owningcollnameInterdisciplinary and Peer-Reviewed


Files in this item

Name:
10.1177_002199838201600505.pdf
Size:
680.6KB
Format:
PDF
View/Open

Show simple item record

Remediation of Harmful Language

The University of Michigan Library aims to describe its collections in a way that respects the people and communities who create, use, and are represented in them. We encourage you to Contact Us anonymously if you encounter harmful or problematic language in catalog records or finding aids. More information about our policies and practices is available at Remediation of Harmful Language.

Accessibility

If you are unable to use this file in its current format, please select the Contact Us link and we can modify it to make it more accessible to you.