View Item 

Show simple item record

Heat of Reaction, Degree of Cure, and Viscosity of Hercules 3501-6 Resin

dc.contributor.authorWoo Il Lee,en_US
dc.contributor.authorLoos, Alfred Charlesen_US
dc.contributor.authorSpringer, George S.en_US
dc.date.accessioned2010-04-13T20:12:54Z
dc.date.available2010-04-13T20:12:54Z
dc.date.issued1982en_US
dc.identifier.citationWoo Il Lee, ; Loos, Alfred; Springer, George (1982). "Heat of Reaction, Degree of Cure, and Viscosity of Hercules 3501-6 Resin." Journal of Composite Materials 16(6): 510-520. <http://hdl.handle.net/2027.42/68202>en_US
dc.identifier.issn0021-9983en_US
dc.identifier.urihttps://hdl.handle.net/2027.42/68202
dc.description.abstractThe heat of reaction, degree of cure, and viscosity of Hercules 3501-6 resin were measured using a differential scanning calorimeter and a disc and plate type viscometer. Expression were developed for correlating the rate of degree of cure and the viscosity with the degree of cure. Viscosities calculated by these ex pressions were compared with data reported previously, and good agreement was found between the present results and the previous data.en_US
dc.format.extent3108 bytes
dc.format.extent386482 bytes
dc.format.mimetypetext/plain
dc.format.mimetypeapplication/pdf
dc.publisherSage Publicationsen_US
dc.titleHeat of Reaction, Degree of Cure, and Viscosity of Hercules 3501-6 Resinen_US
dc.typeArticleen_US
dc.subject.hlbsecondlevelAerospace Engineeringen_US
dc.subject.hlbtoplevelEngineeringen_US
dc.description.peerreviewedPeer Revieweden_US
dc.contributor.affiliationumDepartment of Mechanical Engineering and Applied Mechanics The University of Michigan Ann Arbor, Michigan 48109en_US
dc.contributor.affiliationumDepartment of Mechanical Engineering and Applied Mechanics The University of Michigan Ann Arbor, Michigan 48109en_US
dc.contributor.affiliationumDepartment of Mechanical Engineering and Applied Mechanics The University of Michigan Ann Arbor, Michigan 48109en_US
dc.description.bitstreamurlhttp://deepblue.lib.umich.edu/bitstream/2027.42/68202/2/10.1177_002199838201600605.pdf
dc.identifier.doi10.1177/002199838201600605en_US
dc.identifier.sourceJournal of Composite Materialsen_US
dc.identifier.citedreferenceAung, W., "Calculation of Resin Temperature and Resin Flow Rate during Multilayer Board Lamination," International Electronic Packaging and Production Conf. Proc. of the Tech. Programme INTERNEPCON EUROPE 1973, Brussels (1973).en_US
dc.identifier.citedreferenceLoos, A.C. and Springer, G.S., "Calculation of Cure Process Variables during Cure of Graphite-Epoxy Composites," in Composite Materials, Quality Assurance and Processing (C.E. Browning, ed.). ASTM STP 797, 1983, pp. 110-118.en_US
dc.identifier.citedreferenceSpringer, G.S., "A Model of the Curing Process of Epoxy Matrix Composites," in Progress in Science and Engineering of Compositesen_US
dc.identifier.citedreferenceT. Hayashi, K. Kowaka and S. Umekawa, eds.), Japan Society for Composite Materials, 1982, pp. 23-35.en_US
dc.identifier.citedreferenceModel DSC-2 Differential Scanning Calorimeter Instructions Manual, Perkin-Elmer Corporation (1972).en_US
dc.identifier.citedreferenceFava, R.A., "Differential Scanning Calorimetry of Epoxy Resins," Polymer, Vol. 13, 1968, pp. 137-151.en_US
dc.identifier.citedreferenceMacosko, C. and Starita, J.M., "Polymer Characteristics with a New Rheometer," SPE Tech. Papers, Vol. 17, 1971, pp. 595-600.en_US
dc.identifier.citedreferenceRosen, S.L., Fundamental Principles of Polymeric Materials, Wiley, 1982, Chap. 18.en_US
dc.identifier.citedreferenceCox, W.P. and Merz, E.H., "Correlation of Dynamic and Steady Flow Viscosities," J. Polym. Sci., Vol. 28, 1958, pp. 619-622.en_US
dc.identifier.citedreferenceSourour, S. and Kamal, M.R., "Differential Scanning Calorimetry of Epoxy Cure: Isothermal Cure Kinetics," Thermochimica Acta, Vol. 14, 1976, pp. 41-59.en_US
dc.identifier.citedreferencePrime, R. Bruce, "Differential Scanning Calorimetry of the Epoxy Cure Reaction," Polym. Eng. Sci., Vol. 13, 1973, pp. 365-371.en_US
dc.identifier.citedreferencePappalardo, L.T., "DSC Evaluation of Epoxy and Polyamide-Impregnated Laminates (Prepregs)," J. Appl. Polym. Sci., Vol. 21, 1977, pp. 809-820.en_US
dc.identifier.citedreferenceIMSL Library Reference Manual, International Mathematical and Statistical Libraries Incorporated, Houston, Texas, Vol. 3, 1980.en_US
dc.identifier.citedreferenceStolin, A.M., Merzhanov, A.G. and Malkin, A. Ya, "Non-Isothermal Phenomena in Polymer Engineering and Science: A Review. Part II: Non-Isothermal Phenomena in Polymer Deformation," Polym. Eng. Sci., Vol. 19, 1979, pp. 1074-1080.en_US
dc.identifier.citedreferenceCarpenter, J.F., "Test Program Evaluation of Hercules 3501-6 Resin," Report No. N000 9-77-C-0155 Mc Donnell Aircraft Company, St. Louis, Missouri (1978). Also available from NTIS under order No. AD-A-054283, 1978.en_US
dc.owningcollnameInterdisciplinary and Peer-Reviewed


Files in this item

Name:
10.1177_002199838201600605.pdf
Size:
377.4KB
Format:
PDF
View/Open

Show simple item record

Remediation of Harmful Language

The University of Michigan Library aims to describe library materials in a way that respects the people and communities who create, use, and are represented in our collections. Report harmful or offensive language in catalog records, finding aids, or elsewhere in our collections anonymously through our metadata feedback form. More information at Remediation of Harmful Language.

Accessibility

If you are unable to use this file in its current format, please select the Contact Us link and we can modify it to make it more accessible to you.