Search Constraints
Filtering by:
Language
English
Remove constraint Language: English
Resource type
Dataset
Remove constraint Resource type: Dataset
Number of results to display per page
View results as:
Search Results
-
- Creator:
- Stringer, Kathleen A.
- Description:
- These data were produced from the survival analysis of the pre-treatment metabolomics data generated from the Phase II clinical trial of L-carnitine treatment for septic shock (the RACE trial - see https://clinicaltrials.gov/ct2/show/NCT01665092). The results based on respective acetylcarnitine or valine concentration are presented (pdf). The csv files contain the at risk numbers from the Kaplan-Meier survival analysis. These findings described in our manuscript: Pharmacometabolomics Identifies Candidate Predictor Metabolites of an L-carnitine Treatment Mortality Benefit in Septic Shock. and All of the metabolomics data are available at the NIH Common Fund's National Metabolomics Data Repository (NMDR) website, the Metabolomics Workbench, https://www.metabolomicsworkbench.org which is supported by NIH grant U2C-DK119886 and where it has been assigned Project ID (accession number ST001319). The data can be accessed directly via its Project DOIs: (DOI: http://dx.doi.org/10.21228/M8VX0Z).
- Keyword:
- sepsis, septic shock, survival, mortality, metabolomics, and pharmacometabolomics
- Citation to related publication:
- Puskarich, M. A., Jennaro, T. S., Gillies, C. E., Evans, C. R., Karnovsky, A., McHugh, C. E., Flott, T. L., Jones, A. E., Stringer, K. A., & Investigators, O. behalf of the R. T. (2021). Pharmacometabolomics Identifies Candidate Predictor Metabolites of an L-carnitine Treatment Mortality Benefit in Septic Shock. (Preprint) https://doi.org/10.1101/2021.01.28.21250687
- Discipline:
- Health Sciences
-
- Creator:
- Moldwin, Mark B. and O'Brien, Paul
- Description:
- A new empirical model of the plasmapause location has been developed using density data from the plasma wave receiver onboard the CRRES spacecraft for nearly 1000 orbits. The “plasmapause” is identified here as the innermost sharp gradient in density (change of a factor of 5 in <0.5 L). Such a sharp gradient was observed on 73% of the CRRES inbound and outbound orbits that returned data. The plasmapause location is expressed as a linear function of Kp (previous 12 hour maximum) and local time. The model gives the linear best fit location of the plasmapause as well as the standard deviations of the model parameters.
- Keyword:
- Plasmapause and Plasmasphere
- Citation to related publication:
- Moldwin, M. B., Downward, L., Rassoul, H. K., Amin, R., and Anderson, R. R. (2002), A new model of the location of the plasmapause: CRRES results, J. Geophys. Res., 107( A11), 1339, doi:10.1029/2001JA009211 and O'Brien, T. P., and Moldwin, M. B. (2003), Empirical plasmapause models from magnetic indices, Geophys. Res. Lett., 30, 4, 1152. doi:10.1029/2002GL016007
- Discipline:
- Science
-
- Creator:
- Zhang, Kaihua and Collette, Matthew D.
- Description:
- This Ph.D. research focuses on two subject areas: experimental and numerical model, which serves as two essential parts of a digital twin. A digital twin contains models of real-world structures and fuses data from observations of the structures and scale experiment to pull the models into better agreement with the real world. Digital twin models have the promise of representing complex marine structures and providing enhanced lifecycle performance and risk forecasts. Experimentally verifying the updating approaches is necessary but rarely performed. Thus, the proposed work is designing an experiment and developing a numerical model updated by the experimental data. The dataset contains all the data collected in the experiment of a four-crack hexagon- shaped specimen is presented, designed to mimic many of the properties of complex degrading marine structural systems, such as crack interaction, component inter- dependence, redundant load path, and non-binary failure.
- Keyword:
- System Reliability, Dynamic Bayesian Networks, Fatigue Experiment, Crack Length Measurement, Experimental Validation, Reliability Prediction
- Citation to related publication:
- "Evaluating Crack Growth Prediction in Structural Systems with Dynamic Bayesian Networks", submitted to Computers and Structure and Zhang, K., & Collette, M. (2021). Experimental investigation of structural system capacity with multiple fatigue cracks. Marine Structures, 78, 102943. https://doi.org/10.1016/j.marstruc.2021.102943
- Discipline:
- Engineering
-
- Creator:
- Zhang, Yizhen
- Description:
- We collected hours of functional magnetic resonance imaging data from human subjects listening to natural stories. We developed a predictive model of the voxel-wise response and further applied it to thousands of new words to understand how the brain stores and connects different concepts. and This is a dataset for the paper: Zhang, Y., Han, K., Worth, R., & Liu, Z. (2020). Connecting concepts in the brain by mapping cortical representations of semantic relations. Nature communications, 11(1), 1-13. https://doi.org/10.1038/s41467-020-15804-w. This project is also documented at https://osf.io/eq2ba/.
- Keyword:
- fMRI, natural story comprehension, neural encoding, semantic processing, word relations, and naturalistic stimuli
- Citation to related publication:
- Zhang, Y., Han, K., Worth, R., & Liu, Z. (2020). Connecting concepts in the brain by mapping cortical representations of semantic relations. Nature communications, 11(1), 1-13. https://doi.org/10.1038/s41467-020-15804-w
- Discipline:
- Science
-
- Creator:
- Brasch, Jonathan M, Elipot, Shane, and Arbic, Brian
- Description:
- For Drifters, HYCOM, MITgcm: Spectra and kinetic energy files. Please see readme.txt for a description of all data and code contained here. and - Compare kinetic energies (KE) of high-resolution global ocean models estimated from rotary spectra to KE in surface drifter observations. - Near-inertial KE is closer to drifter observations in models with frequently updated wind forcing - Internal tide KE is closer to drifter observations in models with topographic wave drag
- Keyword:
- oceanography, rotary spectra, kinetic energy, sea surface velocity, and drifters
- Citation to related publication:
- Elipot, S., Lumpkin, R., Perez, R. C., Lilly, J. M., Early, J. J., & Sykulski, A. M. (2016). A global surface drifter data set at hourly resolution. Journal of Geophysical Research: Oceans, 121(5), 2937–2966. https://doi.org/10.1002/2016JC011716
- Discipline:
- Science
-
- Creator:
- Boles, Austin H and van der Pluijm, Ben
- Description:
- This data was generated as a chapter in the dissertation of Austin Boles.
- Keyword:
- authigenic illite, hydrogen isotopes, and 40Ar/39Ar isotopic analysis
- Citation to related publication:
- Boles, A., & Pluijm, B. van der. (2020). Locally Derived, Meteoric Fluid Infiltration Was Responsible for Widespread Late Paleozoic Illite Authigenesis in the Appalachian Basin. Tectonics, 39(7), e2020TC006137. https://doi.org/10.1029/2020TC006137
- Discipline:
- Science
-
Quantifying near-surface rock strength on a regional scale from hillslope stability models - dataset
- Creator:
- Townsend, Kirk F., Gallen, Sean F., and Clark, Marin K.
- Description:
- These datasets support the findings of Townsend et al. (2020). In this article, we quantify rock strength using two novel applications of hillslope stability models, resulting in estimates of cohesive and frictional strength at the spatial scale of small watersheds. We compare these results against the direct-shear test dataset here for validation of our approach. We find that cohesive strength is dependent on the original burial depth of the sedimentary rocks studied here. The low-temperature thermochronometry data was used to assess the magnitude of burial.
- Keyword:
- Thermochronology, Thermochronometry, Direct-Shear, Landslides, Rock Strength, Landscape Evolution, and Geomorphology
- Citation to related publication:
- Townsend, K.F., Gallen, S.F., & Clark, M.K., in press, Quantifying near-surface rock strength on a regional scale from hillslope stability models: Journal of Geophysical Research Earth Surface. https://agupubs.onlinelibrary.wiley.com/doi/abs/10.1029/2020JF005665
- Discipline:
- Science
-
- Creator:
- James, David A. and Lokam, Nikhil
- Description:
- The object of this project is to provide researchers and students with a tool to allow them to develop an intuitive understanding of singular vectors and singular values. 2x2 matrices A with real entries map circles to ellipses; in particular, unit circles centered at the origin to ellipses centered at the origin. It is known that the points on the ellipse farthest from the origin correspond to the singular vectors of A. Users can use the GUI to enter matrices of their choice and explore to visually self-determine the singular vectors/values.
- Keyword:
- SVD, Singular Value Decomposition, Singular Vector, Singular Value, and Matrix
- Discipline:
- Science and Engineering
-
- Creator:
- Swiger, Brian M., Liemohn, Michael W., and Ganushkina, Natalia Y.
- Description:
- We sampled the near-Earth plasma sheet using data from the NASA Time History of Events and Macroscale Interactions During Substorms mission. For the observations of the plasma sheet, we used corresponding interplanetary observations using the OMNI database. We used these data to develop a data-driven model that predicts plasma sheet electron flux from upstream solar wind variations. The model output data are included in this work, along with code for analyzing the model performance and producing figures used in the related publication. and Data files are included in hdf5 and Python pickle binary formats; scripts included are set up for use of Python 3 to access and process the pickle binary format data.
- Keyword:
- neural network, plasma sheet, solar wind, machine learning, keV electron flux, deep learning, and space weather
- Citation to related publication:
- Swiger, B. M., Liemohn, M. W., & Ganushkina, N. Y. (2020). Improvement of Plasma Sheet Neural Network Accuracy With Inclusion of Physical Information. Frontiers in Astronomy and Space Sciences, 7. https://doi.org/10.3389/fspas.2020.00042
- Discipline:
- Science and Engineering
-
- Creator:
- Agrawal, Mayank and Glotzer, Sharon C
- Description:
- Micron-scale robots require systems that can morph into arbitrary target configurations controlled by external agents such as heat, light, electricity, and chemical environment. Achieving this behavior using conventional approaches is challenging because the available materials at these scales are not programmable like their macroscopic counterparts. To overcome this challenge, we propose a design strategy to make a robotic machine that is both programmable and compatible with colloidal-scale physics. Our strategy uses motors in the form of active colloidal particles that constantly propel forward. We sequence these motors end-to-end in a closed chain forming a two-dimensional loop that folds under its mechanical constraints. We encode the target loop shape and its motion by regulating six design parameters, each scale-invariant and achievable at the colloidal scale. The research dataset includes simulation, visualization, and analysis scripts and results generated for the 2D chain loops of self-propelling particles. File Description:, -- arrows_folding - Contains the data for the folded chain loop shapes resembling an arrowhead., -- bending_vs_variation - Contains the data to study the stability of a particular shape in simulations as one of the segments of the shape bends and/or the distribution of propulsion on it varies., -- curved_triangle - Contains the data to study motion and bending of a triangle shape made using chain loop., -- example_shapes - Contains data for various examples of shapes that can be generated by designing the chain loops., -- nskT_vs_fakT - Contains the data for a specific shape to study the effect of scaling up the number of particles (governed by ns) and the propulsion (governed by fa) in its chain., -- stability - Contains the data and theoretical model (stability.py) to study the stability of the six different shapes., -- tuning_design_forM - Contains the data for sequential tuning the design parameters to fold the shape "M" as described in the corresponding publication., and -- two_neighboring_cds_segments_ - Contains the data to study a system of two neighboring chain segments with respect to different parameters discussed in the publication.
- Keyword:
- active particles, colloidal robotics, design, kilobots, and morphological control
- Citation to related publication:
- Agrawal, M, Glotzer SC. (2020). Scale-free, programmable design of morphable chain loops of kilobots and colloidal motors. PNAS. www.pnas.org/cgi/doi/10.1073/pnas.1922635117
- Discipline:
- Engineering