Search Constraints
« Previous |
1 - 10 of 175
|
Next »
Number of results to display per page
View results as:
Search Results
-
- Creator:
- Figueroa, C. Alberto
- Description:
- This .stl file represents the largest vessels of the cerebral circulation, specifically around the Circle of Willis. The file was created from a Computed Tomography Angiography (CTA) of a relatively healthy patient. It consisted of a 512 x 512 x 709 voxel image with a resolution of 0:35 mm x 0:35 mm x 0:5 mm. The model includes the basilar artery (1), left and right internal carotid arteries (2, and 3), left and right anterior cerebral arteries (4, and 5), left and right middle cerebral arteries (6, and 7), left and right posterior cerebral arteries (8, and 9), and various communicating arteries (10, 11, and 12).
- Keyword:
- Circle of Willis, Blood flow simulation, Hemodynamics, and Benchmarking blood flow
- Citation to related publication:
- N. Wilson, K. Wang, R. Dutton, C.A. Taylor, "A software framework for creating patient specific geometric models from medical imaging data for simulation based medical planning of vascular surgery", Medical Image Computing and Computer-Assisted Intervention MICCAI 2001, Springer, 2001, pp. 449–456. doi: 10.1007/3-540-45468-3_54 and N. Xiao, J.D. Humphrey, C.A. Figueroa, "Multi-Scale Computational Model of Three-Dimensional Hemodynamics within a Deformable Full-Body Arterial Network”, Journal of Computational Physics, 2013, Vol 244, pp. 22-40. doi: 10.1016/j.jcp.2012.09.016
- Discipline:
- Engineering and Health Sciences
-
- Creator:
- Siegel, Jason B. , Stefanopoulou, Anna G., and McKahn, Denise (McKay)
- Description:
- This section contains work related to the modeling of voltage degradation in a 24 cell PEM fuel cell stack with 300 cm2 cross-sectional area. The experimental hardware used to validate the model consists of a computer controlled system that coordinates air, hydrogen, cooling, and electrical subsystems to operate the stack. Dry hydrogen is pressure regulated for full utilization in the dead-ended anode. Using a solenoid valve, the anode is periodically purged to recover the gradual degradation in voltage. A membrane based humidifier controls the vapor content of the cathode gas stream while a mass flow controller is used to regulate the flow to the desired stoichiometry.
- Citation to related publication:
- Denise A. McKay, Jason B. Siegel, William Ott, and Anna G. Stefanopoulou. Parameterization and prediction of temporal fuel cell voltage behavior during flooding and drying conditions. Journal of Power Sources, 178(1):207 - 222, 2008. https://doi.org/10.1016/j.jpowsour.2007.12.031
- Discipline:
- Engineering
-
- Creator:
- Huang, Cheng MI
- Description:
- A 2D planar representation of a generic laboratory-scale combustor is established to assess the capabilities of ROMs for representing realistic combustion flowfields. The purpose of this dataset is to provide a testbed to build reduced model for relevant challenging reacting flow problems using different methods. The dataset was generated under the Air Force Center of Excellence on Multi-Fidelity Modeling of Rocket Combustion Dynamics and the goal of the center is to advance the state-of-the-art in Reduced Order Models (ROMs) and enable efficient prediction of instabilities in liquid fueled rocket combustion systems., Instrument and/or Software specifications: - recommendation: Matlab and Tecplot, 1. Data_150000to159999.tar: the unsteady flow field data from time step 150000 to 159999 (time increment, dt, between each time step is 1E-7 sec). - Data_160000to169999.tar: the unsteady flow field data from time step 160000 to 169999 (time increment, dt, between each time step is 1E-7 sec). 2. Data_170000to179999.tar: the unsteady flow field data from time step 170000 to 179999 (time increment, dt, between each time step is 1E-7 sec). 3. grid.dat: the topology of the CFD mesh used to generate this data (can be directly loaded in Tecplot). 4. the file "sample_code.zip" contains the sample Matlab scripts to load and output the .dat files to help the researchers to get started. To run the script, the software Matlab is required and the researchers can simply run sampleIO.m script in Matlab to test the code. , and Detailed documentation of how the data is generated can be found in: https://afcoe.engin.umich.edu/benchmark-data
- Citation to related publication:
- Huang, C., Duraisamy, K., and Merkle, C.L., Investigations and Improvement of Robustness of Reduced-Order Models of Reacting Flow, AIAA Journal, 2019., Swischuk, R., Kramer, B., Huang, C., and Willcox, K., Learning Physics-Based Reduced-Order Models for a Single-Injector Combustion Process , AIAA Journal, 2020., and Harvazinski, M.E., Huang, C., Sankaran, V., Feldman, T.W., Anderson, W.E., Merkle, C.L., and Talley, D.G., Coupling between hydrodynamics, acoustics, and heat release in a self-excited unstable combustor, Physics of Fluids, 2015.
- Discipline:
- Engineering
-
- Creator:
- Habbal, Osama, Orabi, Mohamad , Mohanty, Pravansu, and Pannier, Christopher
- Description:
- This research introduces a novel method to produce biomimetic shapes using low cost soluble 3D printed molds. Mesenchymal stem cells in alginate matrix cell viability was studied. The alginate stem cell structure is made in a construct that is 21 mm wide, 6 mm high, with an arbor diameter of 1 mm (see Combined_Test_Channels.stl). The cells showed 64% survivability at 7 days in the 3D constructs.
- Keyword:
- 3D Printing, Additive Manufacturing, and 3D bio scaffold
- Discipline:
- Engineering
-
- Creator:
- Huang, Cheng MI
- Description:
- A 2D planar representation of a generic laboratory-scale combustor is established to assess the capabilities of ROMs for representing realistic combustion flowfields. The purpose of this dataset is to provide a testbed to build reduced model for relevant challenging reacting flow problems using different methods. The dataset was generated under the Air Force Center of Excellence on Multi-Fidelity Modeling of Rocket Combustion Dynamics and the goal of the center is to advance the state-of-the-art in Reduced Order Models (ROMs) and enable efficient prediction of instabilities in liquid fueled rocket combustion systems., Detailed documentation of how the data is generated can be found in: https://afcoe.engin.umich.edu/benchmark-data. Instrument and/or Software specifications: - recommendation: Matlab and Tecplot. , 1. Data_150000to159999.tar: the unsteady flow field data from time step 150000 to 159999 (time increment, dt, between each time step is 1E-7 sec). 2. Data_160000to169999.tar: the unsteady flow field data from time step 160000 to 169999 (time increment, dt, between each time step is 1E-7 sec). , 3. Data_170000to179999.tar: the unsteady flow field data from time step 170000 to 179999 (time increment, dt, between each time step is 1E-7 sec). 4. Data_180000to189999.tar: the unsteady flow field data from time step 180000 to 189999 (time increment, dt, between each time step is 1E-7 sec)., 5. Data_190000to199999.tar: the unsteady flow field data from time step 190000 to 199999 (time increment, dt, between each time step is 1E-7 sec). 6. Data_200000to209999.tar: the unsteady flow field data from time step 200000 to 209999 (time increment, dt, between each time step is 1E-7 sec). , 7. Data_210000to219999.tar: the unsteady flow field data from time step 210000 to 219999 (time increment, dt, between each time step is 1E-7 sec). 8. Data_220000to229999.tar: the unsteady flow field data from time step 220000 to 229999 (time increment, dt, between each time step is 1E-7 sec). , and 9. grid.dat: the topology of the CFD mesh used to generate this data (can be directly loaded in Tecplot). 10. the file "sample_code.zip" contains the sample Matlab scripts to load and output the .dat files to help the researchers to get started. To run the script, the software Matlab is required and the researchers can simply run sampleIO.m script in Matlab to test the code.
- Citation to related publication:
- McQuarrie, S., Huang, C., and Willcox, K., Data-driven reduced-order models via regularised Operator Inference for a single-injector combustion process, Journal of the Royal Society of New Zealand, 2021. (code available: https://github.com/Willcox-Research-Group/ROM-OpInf-Combustion-2D)., McQuarrie, S. A., Huang, C., & Willcox, K. E. (2021). Data-driven reduced-order models via regularised Operator Inference for a single-injector combustion process. Journal of the Royal Society of New Zealand, 51(2), 194–211. https://doi.org/10.1080/03036758.2020.1863237 , Swischuk, R., Kramer, B., Huang, C., & Willcox, K. (2020). Learning Physics-Based Reduced-Order Models for a Single-Injector Combustion Process. AIAA Journal, 58(6), 2658–2672. https://doi.org/10.2514/1.J058943, Huang, C., Duraisamy, K., & Merkle, C. L. (2019). Investigations and Improvement of Robustness of Reduced-Order Models of Reacting Flow. AIAA Journal, 57(12), 5377–5389. https://doi.org/10.2514/1.J058392 , and Harvazinski, M. E., Huang, C., Sankaran, V., Feldman, T. W., Anderson, W. E., Merkle, C. L., & Talley, D. G. (2015). Coupling between hydrodynamics, acoustics, and heat release in a self-excited unstable combustor. Physics of Fluids, 27(4), 045102. https://doi.org/10.1063/1.4916673
- Discipline:
- Engineering
-
- Creator:
- Hong, Yi, Fry, Lauren M., Orendorf, Sophie, Ward, Jamie L., Mroczka, Bryan, Wright, David, and Gronewold, Andrew
- Description:
- Accurate estimation of hydro-meteorological variables is essential for adaptive water management in the North American Laurentian Great Lakes. However, only a limited number of monthly datasets are available nowadays that encompass all components of net basin supply (NBS), such as over-lake precipitation (P), evaporation (E), and total runoff (R). To address this gap, we developed a daily hydro-meteorological dataset covering an extended period from 1979 to 2022 for each of the Great Lakes. The daily P and E were derived from six global gridded reanalysis climate datasets (GGRCD) that include both P and E estimates, and R was calculated from National Water Model (NWM) simulations. Ensemble mean values of the difference between P and E (P – E) and NBS were obtained by analyzing daily P, E, and R. Monthly averaged values derived from our new daily dataset were validated against existing monthly datasets. This daily hydro-meteorological dataset has the potential to serve as a validation resource for current data and analysis of individual NBS components. Additionally, it could offer a comprehensive depiction of weather and hydrological processes in the Great Lakes region, including the ability to record extreme events, facilitate enhanced seasonal analysis, and support hydrologic model development and calibration. The source code and data representation/analysis figures are also made available in the data repository.
- Keyword:
- Great Lakes, Hydrometeorological, National Water Model, Daily, Overlake precipitation, Overlake evaporation, Total runoff, Net Basin Supply, and Water Balance
- Discipline:
- Science and Engineering
-
- Creator:
- Towne, Aaron
- Description:
- This database contains six datasets intended to aid in the conception, training, demonstration, evaluation, and comparison of reduced-complexity models for fluid mechanics. The six datasets are: large-eddy-simulation data for a turbulent jet, direct-numerical-simulation data for a zero-pressure-gradient turbulent boundary layer, particle-image-velocimetry data for the same boundary layer, direct-numerical-simulation data for laminar stationary and pitching flat-plate airfoils, particle-image-velocimetry and force data for an airfoil encountering a gust, and large-eddy-simulation data for the separated, turbulent flow over an airfoil. All data are stored within hdf5 files, and each dataset additionally contains a README file and a Matlab script showing how the data can be read and manipulated. Since all datafiles use the hdf5 format, they can alternatively be read within virtually any other programing environment. An example.zip file included for each dataset provides an entry point for users. The database is an initiative of the AIAA Discussion Group on Reduced-Complexity Modeling and is detailed in the paper listed below. For each dataset, the paper introduces the flow setup and computational or experimental methods, describes the available data, and provide an example of how these data can be used for reduced-complexity modeling. All users should cite this paper as well as appropriate primary sources contained therein. Towne, A., Dawson, S., Brès, G. A., Lozano-Durán, A., Saxton-Fox, T., Parthasarthy, A., Biler, H., Jones, A. R., Yeh, C.-A., Patel, H., Taira, K. (2022). A database for reduced-complexity modeling of fluid flows. AIAA Journal 61(7): 2867-2892.
- Keyword:
- fluid dynamics, reduced-complexity models, and data-driven models
- Discipline:
- Engineering and Science
6Works -
- Creator:
- Brandt, Daniel, A., Bussy-Virat, Charles, D., and Ridley, Aaron, J.
- Description:
- The Multifaceted Optimization Algorithm (MOA) is a tool for generating corrected empirical model thermospheric densities during geomagnetic storms. It consists of a suite of Python functions that operate around the Spacecraft Orbit Characterization Kit (SpOCK), an orbital propagator developed by Charles D. Bussy-Virat, PhD, Joel Getchius, and Aaron J. Ridley, PhD at the University of Michigan, and it estimates new densities for the NRLMSISE-00 atmospheric model. MOA generates new model densities by estimating modifications to inputs to the NLRMSISE-00 model that minimize the orbit error between modeled spacecraft in SpOCK, and their actual altitudes as described in publicly-available Two-Line Element Sets (TLEs), made available online via Space-track.org. MOA consists of three sub-process: (1) The Area Optimization Algorithm (AROPT), (2) the F10.7 Optimization Algorithm (FOPT), and (3) the Ap Optimization Algorithm (APOPT). AROPT computes the contribution to the drag of the modeled spacecraft due to their varying projected area. FOPT estimates modifications to the 10.7 cm solar radio flux in NRLMSISE-00, and APOPT estimates modifications to the Earth's magnetic activity in NRLMSISE-00. MOA finds these modifications across many spacecraft, and the medians of those modifications are then applied in NLRMSISE-00 along the orbit of another satellite to generate new densities for verification. In this instance, modifications are applied along the orbits of the Swarm spacecraft and compared to Swarm GPS-derived densities.
- Keyword:
- Orbit, Satellite, Two-line Element Set, Thermosphere, and Drag
- Citation to related publication:
- Brandt, D. A., Bussy-Virat, C. D., & Ridley, A. J. (2020). A Simple Method for Correcting Empirical Model Densities During Geomagnetic Storms Using Satellite Orbit Data. Space Weather, 18(12), e2020SW002565. https://doi.org/10.1029/2020SW002565
- Discipline:
- Engineering
-
- Creator:
- Baskar, Deepika and Gorodetsky, Alex
- Description:
- Studying the effect of wind on urban air mobility typically requires comprehensive fluid dynamics simulations in a realistic urban geometry. Motivated to enable wide-spread autonomous drone activity in urban centers, such studies have indeed been considered by several authors in the recent literature. However, the accessibility of these approaches to those with less fluid dynamics experience and/or without access to purpose built simulation tools has limited validation and application of the resulting path planning strategies. and The .dat files contain the flow variables for each of the 402240 points sampled from the region under study. For flow visualization purposes, the .dat files are readable using Tecplot Software.
- Keyword:
- UAM, Energy efficient path planning , CFD, and City of Boston
- Citation to related publication:
- Baskar, D., & Gorodetsky, A. (2020). A Simulated Wind-field Dataset for Testing Energy Efficient Path-Planning Algorithms for UAVs in Urban Environment. In AIAA AVIATION 2020 FORUM. American Institute of Aeronautics and Astronautics. https://doi.org/10.2514/6.2020-2920
- Discipline:
- Other and Engineering
-
- Creator:
- Crisp, Dakota N., Saggio, Maria L., Scott, Jared, Stacey, William C., Nakatani, Mitsuyoshi, Gliske, Stephen V., and Lin, Jack
- Description:
- This data and scripts are meant to test and show seizure differentiation based on bifurcation theory. A zip file is included which contains real and simulated seizure waveforms, Matlab scripts, and metadata. The matlab scripts allow for visual review validation and objective feature analysis. The file “README.txt” provides more detail about each individual file within the zip file. and Data citation: Crisp, D.N., Saggio, M.L., Scott, J., Stacey, W.C., Nakatani, M., Gliske, S.F., Lin, J. (2019). Epidynamics: Navigating the map of seizure dynamics - Code & Data [Data set]. University of Michigan Deep Blue Data Repository. https://doi.org/10.7302/ejhy-5h41
- Keyword:
- Bifurcation, Epilepsy, Seizure, and Divergence
- Citation to related publication:
- Saggio, M.L., Crisp, D., Scott, J., Karoly, P.J., Kuhlmann, L., Nakatani, M., Murai, T., Dümpelmann, M., Schulze-Bonhage, A., Ikeda, A., Cook, M., Gliske, S.V., Lin, J., Bernard, C., Jirsa, V., Stacey, W., 2020. In pre-print. Epidynamics characterize and navigate the map of seizure dynamics. bioRxiv 2020.02.08.940072. https://doi.org/10.1101/2020.02.08.940072
- Discipline:
- Engineering, Science, and Health Sciences