Search Constraints
Number of results to display per page
View results as:
Search Results
-
- Creator:
- Towne, Aaron S. and Brès, Guillaume
- Description:
- This dataset contains data from a large eddy simulation of a turbulent jet at Mach number 0.9. The dataset contains 10000 time-resolved snapshots of three-dimensional velocity, density, and pressure fields spanning 2000 acoustic time units and also includes pre-processed azimuthal Fourier modes for each snapshot and the mean flow. All data are stored within hdf5 files, and a Matlab script showing how the data can be read and manipulated is provided. Please see the ‘jet_README.pdf’ file for more information. We recommend using the ‘jet_example.zip’ file as an entry point to the dataset. and The dataset is part of “A database for reduced-complexity modeling of fluid flows” (see references below) and is intended to aid in the conception, training, demonstration, evaluation, and comparison of reduced-complexity models for fluid mechanics. The paper introduces the flow setup and computational methods, describes the available data, and provides two examples of how these data can be used for reduced-complexity modeling. Users of these data should cite the two papers listed below.
- Keyword:
- fluid mechanics, jets, and turbulence
- Citation to related publication:
- Towne, A., Dawson, S., Brès, G. A., Lozano-Durán, A., Saxton-Fox, T., Parthasarthy, A., Biler, H., Jones, A. R., Yeh, C.-A., Patel, H., Taira, K. (2022). A database for reduced-complexity modeling of fluid flows. AIAA Journal 61(7): 2867-2892. and Brès, G. A., Jordan, P., Jaunet, V., Le Rallic, M., Cavalieri, A. V. G., Towne, A., Lele, S. K., Colonius, T., Schmidt, O. T. (2018) Importance of the nozzle-exit boundary-layer state in subsonic turbulent jets. J. Fluid Mech., 851:83–124.
- Discipline:
- Engineering and Science
-
- Creator:
- Towne, Aaron, Saxton-Fox, Theresa, and Parthasarthy, Aadhy
- Description:
- This dataset contains experimental measurements of a zero-pressure-gradient flat-plate boundary layer at five different Reynolds numbers collected using particle image velocimetry. For each Reynolds number, the dataset contains approximately 6000 snapshots of planar velocity fields as well as raw particle image pairs. All data are stored within hdf5 files, and a Matlab script showing how the data can be read and manipulated is provided. Please see the ‘BLexp_README.pdf’ file for more information. We recommend using the ‘BLexp_example.zip’ file as an entry point to the dataset. and The dataset is part of “A database for reduced-complexity modeling of fluid flows” (see references below) and is intended to aid in the conception, training, demonstration, evaluation, and comparison of reduced-complexity models for fluid mechanics. The paper introduces the flow setup and computational methods, describes the available data, and provides an example of how these data can be used for reduced-complexity modeling. Users of these data should cite the papers listed below.
- Keyword:
- fluid mechanics
- Citation to related publication:
- Towne, A., Dawson, S., Brès, G. A., Lozano-Durán, A., Saxton-Fox, T., Parthasarthy, A., Biler, H., Jones, A. R., Yeh, C.-A., Patel, H., Taira, K. (2022). A database for reduced-complexity modeling of fluid flows. AIAA Journal 61(7): 2867-2892.
- Discipline:
- Engineering and Science
-
- Creator:
- Towne, Aaron S. and Lozano-Durán, Adrián
- Description:
- This dataset contains data from two direct numerical simulations of a turbulent zero-pressure-gradient flat-plate boundary layer spanning friction Reynolds numbers from 292 to 728 (BL1) and 488 to 1024 (BL2). The dataset contains time-resolved snapshots of the three-dimensional velocity field for both cases: roughly 10,000 snapshots spanning 20 eddy-turnover times for BL1 and 7,500 snapshots spanning 7 eddy-turnover times for BL2 . Also included for both cases are pre-processed correlations at several wall-normal distances, mean and root-mean-squared velocity and vorticity profiles, several boundary-layer metrics, and time-resolved velocity data in the streamwise-wall-normal plane. All data are stored within hdf5 files, and a Matlab script showing how the data can be read and manipulated is provided. Please see the ‘BLdns_README.pdf’ file for more information. We recommend using the ‘BLdns_example.zip’ file as an entry point to the dataset. and The dataset is part of “A database for reduced-complexity modeling of fluid flows” (see references below) and is intended to aid in the conception, training, demonstration, evaluation, and comparison of reduced-complexity models for fluid mechanics. The paper introduces the flow setup and computational methods, describes the available data, and provides an example of how these data can be used for reduced-complexity modeling. Users of these data should cite the paper listed below.
- Keyword:
- fluid mechanics, boundary layer, and turbulence
- Citation to related publication:
- Towne, A., Dawson, S., Brès, G. A., Lozano-Durán, A., Saxton-Fox, T., Parthasarthy, A., Biler, H., Jones, A. R., Yeh, C.-A., Patel, H., Taira, K. (2022). A database for reduced-complexity modeling of fluid flows. AIAA Journal 61(7): 2867-2892.
- Discipline:
- Engineering and Science
-
- Creator:
- Towne, Aaron, Yeh, Chi-An., Patel, Het, and Taira, Kunihiko
- Description:
- This dataset contains data from a three-dimensional large eddy simulation of Mach 0.3 flow over a NACA 0012 airfoil at Reynolds number 23,000, which features a transitional boundary layer, separation over a recirculation bubble, and a turbulent wake. The dataset contains 16,000 time-resolved snapshots of the mid-span and spanwise-averaged velocity fields. All data are stored within hdf5 files, and a Matlab script showing how the data can be read and manipulated is provided. Please see the ‘airfoilLES_README.pdf’ file for more information. We recommend using the ‘airfoilLES_example.zip’ file as an entry point to the dataset. and The dataset is part of “A database for reduced-complexity modeling of fluid flows” (see references below) and is intended to aid in the conception, training, demonstration, evaluation, and comparison of reduced-complexity models for fluid mechanics. The paper introduces the flow setup and computational methods, describes the available data, and provides an example of how these data can be used for reduced-complexity modeling. Users of these data should cite the papers listed below.
- Citation to related publication:
- Towne, A., Dawson, S., Brès, G. A., Lozano-Durán, A., Saxton-Fox, T., Parthasarthy, A., Biler, H., Jones, A. R., Yeh, C.-A., Patel, H., Taira, K. (2022). A database for reduced-complexity modeling of fluid flows. AIAA Journal 61(7): 2867-2892. and Yeh, C.-A. and Taira, K. (2019) Resolvent-analysis-based design of airfoil separation control. Journal of Fluid Mechanics, 867:572–610.
- Discipline:
- Science and Engineering
-
- Creator:
- Moniri, Saman and Shahani, Ashwin J.
- Description:
- The data is comprised of 20 .hdf files of the X-ray projections recorded during isothermal annealing of Zn-Mg samples, at discrete time-steps shown below for files names ending in ‘...30141’ to ‘…30161’: 30141: prior to annealing; 30142: 1 min annealing; 30143: 3 min; 30144: 5 min; 30145: 7 min; 30146: 10 min; 30147: 15 min; 30148: 20 min; 30150: 31 min; 30151: 1 hr; 30152: 2 hr; 30153: 3 hr; 30154: 4 hr; 30155: 5 hr; 30156: 6 hr; 30157:7 hr; 30158: 8 hr; 30159:9 hr; 30160: 9 hr, 10 min; 30161: 10 hr The raw data file is in .hdf format and can be reconstructed into .tiff, e.g., by using the TomoPy toolbox in Python.
- Keyword:
- Spiral eutectics
- Discipline:
- Engineering
-
- Creator:
- Jones, Monica L.H.
- Description:
- These manikins represent body shape models for children weighing 9 to 23 kg in a seated posture relevant to child restraint design. The design of child restraints is guided in part by anthropometric data describing the distributions of body dimensions of children. However, three-dimensional body shape data have not been available for children younger than three years of age. These manikins will be useful for assessing child accommodation in restraints. The SBSM can also provide guidance for the development of anthropomorphic test devices and computational models of child occupants. The sampled manikins were predicted for a range of torso length and body weight dimensions. The SBSM model was exercised for two torso lengths and nine body weights to obtain 18 body shapes. The 3D shape models can be downloaded in a standard mesh format (PLY). Each body shape is accompanied by predicted landmark locations and standard anthropometric variables.
- Keyword:
- Child anthropometry, Child restraint system, Statistical body shape model, and Anthropomorphic testing device (ATD)
- Discipline:
- Engineering
-
- Creator:
- Carlevaris-Bianco, Nicholas , Ushani, Arash , and Eustice, Ryan
- Description:
- This is a large scale, long-term autonomy dataset for robotics research collected on the University of Michigan’s North Campus. The dataset consists of omnidirectional imagery, 3D lidar, planar lidar, GPS, and proprioceptive sensors for odometry collected using a Segway robot. The dataset was collected to facilitate research focusing on longterm autonomous operation in changing environments. The dataset is comprised of 27 sessions spaced approximately biweekly over the course of 15 months. The sessions repeatedly explore the campus, both indoors and outdoors, on varying trajectories, and at different times of the day across all four seasons. This allows the dataset to capture many challenging elements including: moving obstacles (e.g., pedestrians, bicyclists, and cars), changing lighting, varying viewpoint, seasonal and weather changes (e.g., falling leaves and snow), and long-term structural changes caused by construction projects. To further facilitate research, we also provide ground-truth pose for all sessions in a single frame of reference. and A detailed description of the dataset and the methods used to generate it is in the document nclt.pdf. If you use this dataset in your research please cite: Carlevaris-Bianco, N., Ushani, A., Eustice, R. (2021). The University of Michigan North Campus Long-Term Vision and LIDAR Dataset [Data set]. University of Michigan - Deep Blue. https://doi.org/10.7302/7rnm-6a03
- Keyword:
- Long-term SLAM, place recognition, lidar, computer vision, and field and service robotics
- Citation to related publication:
- Carlevaris-Bianco, Nicholas, et al. “University of Michigan North Campus Long-Term Vision and Lidar Dataset.” The International Journal of Robotics Research, vol. 35, no. 9, Aug. 2016, pp. 1023–1035, doi:10.1177/0278364915614638.
- Discipline:
- Engineering
-
- Creator:
- Malik, Hafiz and Khan, Muhammad Khurran, King Saud University
- Description:
- Details of the microphone used for data collection, acoustic environment in which data was collected, and naming convention used are provided here. 1 - Microphones Used: The microphones used to collect this dataset belong to 7 different trademarks. Table (1) illustrates the number of used Mics of different trademarks and models. Table 1: Trademarks and models of Mics Mic Trademark Mic Model # of Mics Shure SM-58 3 Electro-Voice RE-20 2 Sennheiser MD-421 3 AKG C 451 2 AKG C 3000 B 2 Neumann KM184 2 Coles 4038 2 The t.bone MB88U 6 Total 22 2- Environment Description: A brief description of the 6 environments in which the dataset was collected is presented here: (i) Soundproof room: a small room (nearly 1.5m × 1.5m × 2m), which is closed and completely isolated. With an exception of a small window in the front side of the room which is made of glass, all the walls of the room are made of wood and covered by a layer of sponge from the inner side, and the floor is covered by carpet. (ii) Class room: standard class room (6m × 5m × 3m). (iii) Lab: small lab (4m × 4m × 3m). All the walls are made of glasses and the floor is covered by carpet. The lab contains 9 computers. (iv) Stairs: is in the second floor. The place of recording is 3m × 5m (v) Parking: is the college parking. (vi) Garden: is an open space outside the buildings. 3- Naming Convention: This set of rules were followed as a naming convention to give each file in the dataset a unique name: (i) The file name is 19 characters long, and consists of 5 sections separated by underscores. (ii) The first section is of 3 characters indicates the Microphone trademark. (iii) The second section of 4 characters indicates the microphone model as in table (2). (iv) The third section of 2 characters indicates a specific microphone within a set of microphones of the same trademark and model, since we have more than one microphone of the same trademark and model. (v) The fourth section of 2 characters indicates the environment, where Soundproof room --> 01 Class room --> 02 Lab --> 03 Stairs --> 04 Parking --> 05 Garden --> 06 (vi) The fifth section of 2 characters indicates the language, where Arabic --> 01 English --> 02 Chinese --> 03 Indonesian --> 04 (vii) The sixth section of 2 characters indicates the speaker. Table 2: Microphones Naming Criteria Original Mic Trademark and model --> Naming Convenient Shure SM-58 --> SHU_0058 Electro-Voice RE-20 --> ELE_0020 Sennheiser MD-421 --> SEN_0421 AKG C 451 --> AKG_0451 AKG C 3000 B --> AKG_3000 Neumann KM184 --> NEU_0184 Coles 4038 --> COL_4038 The t.bone MB88U --> TBO_0088 For example: SEN_0421_02_01_02_03 is an English file recorded by speaker number 3 in the soundproof room using microphone number 2 of Sennheiser MD-421
- Keyword:
- audio forensic, multimedia forensics, microphone identification, tamper detection, splicing detection, and codec identification
- Citation to related publication:
- Muhammad Khurram Khan, Mohammed Zakariah, Hafiz Malik & Kim-Kwang Raymond Choo (2018). A novel audio forensic data-set for digital multimedia forensics, Australian Journal of Forensic Sciences, 50:5, 525-542, http://dx.doi.org/10.1080/00450618.2017.1296186
- Discipline:
- Engineering, Government, Politics and Law, and Science
-
- Creator:
- Pine, Alexandra F and Love, Brian J
- Description:
- This data is from a project concerned with dehydrating samples of saturated superabsorbent polymer using a centrifuge. The goal was to consider centrifugation as an energy efficient scheme to dehydrate SAP with the notion of reusing it. The data provided contains mass fractions of solvent removed through centrifugation with varied parameters.
- Keyword:
- Superabsorbent Polymer
- Citation to related publication:
- Pine, A., Wu, C. C., Raghavan, S., & Love, B. (2021). The efficiency of dehydrating desiccants by centrifugation: An assessment of superabsorbent polymers. Drying Technology, 0(0), 1–8. https://doi.org/10.1080/07373937.2021.1939710
- Discipline:
- Engineering
-
- Creator:
- Sick, Volker , Reuss, David L, and Greene, Mark L
- Description:
- This archive contains data files from spark-ignited homogeneous combustion internal combustion engine experiments. Included are high-resolution two-dimensional two-component velocity fields acquired at two 5 x 6 mm regions, one near the head and one near the piston. Crank angle resolved heat flux measurements were made at a third location in the head. The engine was operated at 40 kPa, 500 and 1300 RPM, motor and fired. Included are in-cylinder pressure measurements, external pressure and temperature data, as well as details on the geometry of the optical engine to enable setups of simulation configurations.
- Keyword:
- combustion, internal combustion engine, heat Transfer, particle image velocimetry, in-cylinder flow, TCC III engine , optical engine, CFD validation, PIV, boundary layer, and turbulence
- Discipline:
- Engineering