Search Constraints
Number of results to display per page
View results as:
Search Results
-
- Creator:
- Siegel, Jason B. , Stefanopoulou, Anna G., and McKahn, Denise (McKay)
- Description:
- This section contains work related to the modeling of voltage degradation in a 24 cell PEM fuel cell stack with 300 cm2 cross-sectional area. The experimental hardware used to validate the model consists of a computer controlled system that coordinates air, hydrogen, cooling, and electrical subsystems to operate the stack. Dry hydrogen is pressure regulated for full utilization in the dead-ended anode. Using a solenoid valve, the anode is periodically purged to recover the gradual degradation in voltage. A membrane based humidifier controls the vapor content of the cathode gas stream while a mass flow controller is used to regulate the flow to the desired stoichiometry.
- Citation to related publication:
- Denise A. McKay, Jason B. Siegel, William Ott, and Anna G. Stefanopoulou. Parameterization and prediction of temporal fuel cell voltage behavior during flooding and drying conditions. Journal of Power Sources, 178(1):207 - 222, 2008. https://doi.org/10.1016/j.jpowsour.2007.12.031
- Discipline:
- Engineering
-
- Creator:
- Crisp, Dakota N., Cheung, Warwick, Gliske, Stephen V., Lai, Alan, Freestone, Dean R., Grayden, David B., Cook, Mark J., and Stacey, William C.
- Description:
- The data and the scripts are to show that seizure onset dynamics and evoked responses change over the progression of epileptogenesis defined in this intrahippocampal tetanus toxin rat model. All tests explored in this study can be repeated with the data and scripts included in this repository. and Dataset citation: Crisp, D.N., Cheung, W., Gliske, S.V., Lai, A., Freestone, D.R., Grayden, D.B., Cook, MJ., Stacey, W.C. (2019). Epileptogenesis modulates spontaneous and responsive brain state dynamics [Data set]. University of Michigan Deep Blue Data Repository. https://doi.org/10.7302/r6vg-9658
- Keyword:
- evoked response, stimulation, bifurcation, epilepsy, seizure, divergence, and dynamics
- Citation to related publication:
- Crisp, D. N., Cheung, W., Gliske, S. V., Lai, A., Freestone, D. R., Grayden, D. B., Cook, M. J., & Stacey, W. C. (2020). Quantifying epileptogenesis in rats with spontaneous and responsive brain state dynamics. Brain Communications, 2(1). https://doi.org/10.1093/braincomms/fcaa048
- Discipline:
- Science, Engineering, and Health Sciences
-
- Creator:
- Crisp, Dakota N., Saggio, Maria L., Scott, Jared, Stacey, William C., Nakatani, Mitsuyoshi, Gliske, Stephen V., and Lin, Jack
- Description:
- This data and scripts are meant to test and show seizure differentiation based on bifurcation theory. A zip file is included which contains real and simulated seizure waveforms, Matlab scripts, and metadata. The matlab scripts allow for visual review validation and objective feature analysis. The file “README.txt” provides more detail about each individual file within the zip file. and Data citation: Crisp, D.N., Saggio, M.L., Scott, J., Stacey, W.C., Nakatani, M., Gliske, S.F., Lin, J. (2019). Epidynamics: Navigating the map of seizure dynamics - Code & Data [Data set]. University of Michigan Deep Blue Data Repository. https://doi.org/10.7302/ejhy-5h41
- Keyword:
- Bifurcation, Epilepsy, Seizure, and Divergence
- Citation to related publication:
- Saggio, M.L., Crisp, D., Scott, J., Karoly, P.J., Kuhlmann, L., Nakatani, M., Murai, T., Dümpelmann, M., Schulze-Bonhage, A., Ikeda, A., Cook, M., Gliske, S.V., Lin, J., Bernard, C., Jirsa, V., Stacey, W., 2020. In pre-print. Epidynamics characterize and navigate the map of seizure dynamics. bioRxiv 2020.02.08.940072. https://doi.org/10.1101/2020.02.08.940072
- Discipline:
- Engineering, Science, and Health Sciences
-
- Creator:
- Bougher, Stephen W. (CLaSP Department, U. of Michigan) and Roeten, Kali J. (CLaSP Department, U. of Michigan)
- Description:
- The NASA MAVEN (Mars Atmosphere and Volatile Evolution) spacecraft, which is currently in orbit around Mars, has been taking monthly measurements of the speed and direction of the winds in the upper atmosphere of Mars between about 140 to 240 km above the surface. The observed wind speeds and directions change with time and location, and sometimes fluctuate quickly. These measurements are compared to simulations from a computer model of the Mars atmosphere called M-GITM (Mars Global Ionosphere-Thermosphere Model), developed at U. of Michigan. This is the first comparison between direct measurements of the winds in the upper atmosphere of Mars and simulated winds and is important because it can help to inform us what physical processes are acting on the observed winds. Some wind measurements have similar wind speeds or directions to those predicted by the M-GITM model, but sometimes, there are large differences between the simulated and measured winds. The disagreements between wind observations and model simulations suggest that processes other than normal solar forcing may become relatively more important during these observations and alter the expected circulation pattern. Since the global circulation plays a role in the structure, variability, and evolution of the atmosphere, understanding the processes that drive the winds in the upper atmosphere of Mars provides key context for understanding how the atmosphere behaves as a whole system. A basic version of the M-GITM code can be found on Github as follows: https:/github.com/dpawlows/MGITM and About 30 Neutral Gas and Ion Mass Spectrometer (NGIMS) wind campaigns (of 5 to 10 orbits each) have been conducted by the MAVEN team (Benna et al., 2019). Five of these campaigns are selected for detailed study (Roeten et al. 2019). The Mars conditions for these five campaigns have been used to launch corresponding M-GITM code simulations, yielding 3-D neutral wind fields for comparison to these NGIMS wind observations. The M-GITM datacubes used to extract the zonal and meridional neutral winds, along the trajectory of each orbit path between 140 and 240 km, are provided in this Deep Blue Data archive. README files are provided for each datacube, detailing the contents of each file. A general README file is also provided that summarizes the inputs and outputs of the M-GITM code simulations for this study.
- Keyword:
- Mars, MAVEN spacecraft, Mars thermosphere, and Mars global upper atmosphere winds
- Citation to related publication:
- Roeten, K. J., Bougher, S. W., Benna, M., Mahaffy, P. R., Lee, Y., Pawlowski, D., et al. (2019). MAVEN/NGIMS thermospheric neutral wind observations: Interpretation using the M‐GITM general circulation model. Journal of Geophysical Research: Planets, 124, 3283– 3303. https://doi.org/10.1029/2019JE005957
- Discipline:
- Science and Engineering
-
- Creator:
- Ramasubramani, Vyas
- Description:
- The goal of the work is to elucidate the stability of a complex experimentally observed structure of proteins. We found that supercharged GFP molecules spontaneously assemble into a complex 16-mer structure that we term a protomer, and that under the right conditions an even larger assembly is observed. The protomer structure is very well defined, and we performed simulations to try and understand the mechanics underlying its behavior. In particular, we focused on understanding the role of electrostatics in this system and how varying salt concentrations would alter the stability of the structure, with the ultimate goal of predicting the effects of various mutations on the stability of the structure. There are two separate projects included in this repository, but the two are closely linked. One, the candidate_structures folder, contains the atomistic outputs used to generate coarse-grained configurations. The actual coarse-grained simulations are in the rigid_protein folder, which pulls the atomistic coordinates from the other folder. All data is managed by signac and lives in the workspace directories, which contain various folders corresponding to different parameter combinations. The parameters associated with a given folder are stored in the signac_statepoint.json files within each subdirectory. The atomistic data uses experimentally determined protein structures as a starting point; all of these are stored in the ConfigFiles folder. The primary output is the topology files generated from the PDBs by GROMACS; these topologies are then used to parametrize the Monte Carlo simulations. In some cases, atomistic simulations were actually run as well, and the outputs are stored alongside the topology files. In the rigid_protein folder, the ConfigFiles folder contains MSMS, the software used to generate polyhedral representations of proteins from the PDBs in the candidate_structures folder. All of the actual polyhedral structures are also stored in the ConfigFiles folder. The actual simulation trajectories are stored as general simulation data (GSD) files within each subdirectory of the workspace, along with a single .pos file that contains the shape definition of the (nonconvex) polyhedron used to represent a protein. The logged quantities, such as energies and MC move sizes, are stored in .log files. The logic for the simulations in the candidate_structures project is in the Python scripts project.py, operations.py, and scripts/init.py. The rigid_protein folder also includes the notebooks directory, which contains Jupyter notebooks used to perform analyses, as well as the Python scripts used to actually perform the simulations and manage the data space. In particular, the project.py, operations.py and scripts/init.py scripts contain most of the logic associated with the simulations.
- Keyword:
- Protein assembly, Cryo TEM, Hierarchical Assembly, Monte Carlo simulation, and Coarse-grained simulation
- Discipline:
- Science and Engineering
-
- Creator:
- Figueroa, C. Alberto
- Description:
- This information provides the data and commands to manually setup the computational simulations used in the PLOS ONE paper 'Patient-specific modeling of right coronary circulation vulnerability post-liver transplant in Alagille’s syndrome' using CRIMSON (CARDIOVASCULAR INTEGRATED MODELLING & SIMULATION) a prototype simulation environment developed under the support of the European Research Council (( http://www.crimson.software/)., Note that a Windows version of the CRIMSON flowsolver is provided as part of the CRIMSON Windows installer, but you will need a very powerful Windows computer to run these simulations, as the models used in the present work are extremely computationally-demanding. It is recommended that you use a Linux version of the CRIMSON flowsolver on a high-performance computer., Option 1 (ready-to-use files to immediately start the simulation): 1. Please unzip the Ready-to-use files. 2. Copy the folders of each of the three conditions to the high performance computer. 3. In addition to different codes used, each folder provides the boundary conditions applied in the simulations described in the manuscript (e.g. LPN parameters). To run the 3D simulations for each condition simply launch the it using the CRIMSON flowsolver. In addition, the solver.inp file can be modified to run a 0D "real-time simulation" (please open solver.inp with a text editor and modify line 4 "Simulate in Purely Zero Dimensions:" to "True")., Option 2 (using the MITK files): 1. Please download and install Crimson software ( http://www.crimson.software/). 2. Please unzip the MITK files and the Ready-to-use files. 3. From amongst the provided MITK files, load the MITK file of interest to CRIMSON (using the MITK files, additional changes can be made to the computational model in case the user wants to explore different settings/boundary conditions e.g. change the vascular wall properties, introducing a change in the geometry to create a virtual stenosis). 3. Navigate to the tree in the "Data Manager" panel and select the "Pulmonaries", "CRIMSON SOLVER" and then "Solver study 3D" items, in the described order. 4. In the right hand panel select the "CRIMSON Solver setup" tab and scroll down the right hand bar until to find the "Setup Solver" box; click to output the simulation files (faceInfo.dat, geombc.dat.1, multidomain.dat, netlist_surface.dat,numstart.dat, presolver folder, solver.inp, restart.0.1). 5. Copy and replace the geombc.dat.1 and restart.0.1 generated by CRIMSON for each individual condition to the respective unziped folder in the Ready-to-use file (discard the remaining files that were output by CRIMSON). Note that if you have not changed anything about the model (e.g. vascular wall properties), then doing this will produce restart.0.1 and geombc.dat.1 files which are identical to the ready-to-use versions. 6. Finally copy each Condition folder to the high performance computer and simply launch the simulation using the CRIMSON flowsolver., and For technical queries please contact crimson-users@googlegroups.com. --October 2018.
- Citation to related publication:
- Silva Vieira M, Arthurs CJ, Hussain T, Razavi R, Figueroa CA (2018) Patient-specific modeling of right coronary circulation vulnerability post-liver transplant in Alagille’s syndrome. PLOS ONE 13(11): e0205829. https://doi.org/10.1371/journal.pone.0205829
- Discipline:
- Engineering and Health Sciences
-
- Creator:
- Reed, Matthew P., Boyle, K.
- Description:
- This is the first physical anthropomorphic test device to be based both on statistical body shape models as well as 3D printing.
- Keyword:
- Child Belt Fit Manikin
- Discipline:
- Engineering
-
- Creator:
- Isaacoff, Benjamin P., Li, Yilai, Lee, Stephen A., and Biteen, Julie S.
- Description:
- This is the experimental data referenced in our manuscript entitled “SMALL-LABS: An algorithm for measuring single molecule intensity and position in the presence of obscuring backgrounds .” These live-cell single-molecule imaging movies were used as a test of the SMALL-LABS single-molecule image analysis algorithm. The dataset comprises two movies; each one is provided both as a .tif stack and as an .avi file. The movie called “low_bg” has a standard low background, and the movie called “high_bg” includes a high fluorescent background produced by an external 488-nm laser.
- Keyword:
- single-molecule, microscopy, image analysis, mirobiology, and bacteria
- Citation to related publication:
- B.P. Isaacoff, Y. Li, S.A. Lee, J.S. Biteen, "SMALL-LABS: Measuring Single-Molecule Intensity and Position in Obscuring Backgrounds." Biophysical Journal, 975-982, 116, 2019. https://doi.org/10.1016/j.bpj.2019.02.006
- Discipline:
- Engineering and Science
-
- Creator:
- Mirshams Shahshahani, Payam
- Description:
- Investigating minimum human reaction times is often confounded by the motivation, training, and state of arousal of the subjects. We used the reaction times of athletes competing in the shorter sprint events in the Athletics competitions in recent Olympics (2004-2016) to determine minimum human reaction times because there's little question as to their motivation, training, or state of arousal. The reaction times of sprinters however are only available on the IAAF web page for each individual heat, in each event, at each Olympic. Therefore we compiled all these data into two separate excel sheets which can be used for further analyses.
- Keyword:
- minimum reaction time, sprinter, Olympics, Athletics, sex difference, starting block, and false start
- Citation to related publication:
- Mirshams Shahshahani P, Lipps DB, Galecki AT, Ashton-Miller JA (2018) On the apparent decrease in Olympic sprinter reaction times. PLoS ONE 13(6): e0198633. https://doi.org/10.1371/journal.pone.0198633
- Discipline:
- Engineering, Health Sciences, Science, Other, and General Information Sources
-
- Creator:
- Nguyen, Thanh H., Wright, Mason, Wellman, Michael P., and Singh, Satinder
- Description:
- In this work , we study the problem of allocating limited security countermeasures to protect network data from cyber-attacks, for scenarios modeled by Bayesian attack graphs. We consider multi-stage interactions between a network administrator and cybercriminals, formulated as a security game. We propose parameterized heuristic strategies for the attacker and defender and provide detailed analysis of their time complexity. Our heuristics exploit the topological structure of attack graphs and employ sampling methods to overcome the computational complexity in predicting opponent actions. Due to the complexity of the game, we employ a simulation-based approach and perform empirical game analysis over an enumerated set of heuristic strategies. Finally, we conduct experiments in various game settings to evaluate the performance of our heuristics in defending networks, in a manner that is robust to uncertainty about the security environment.
- Keyword:
- Empirical Game-Theoretic Analysis, Multi-stage Security Games, Attack Graph, Game Theory, and Moving Target Defense
- Discipline:
- Science and Engineering
-
- Creator:
- Moniri, Saman, Xiao, Xianghui, and Shahani, Ashwin J.
- Description:
- The data file is comprised of 22,500 X-ray projections (15 scans of 1500 projections each) recorded during solidification of Al-Ge-Na. The raw data file is in .hdf format and can be reconstructed into .tiff, e.g., by using the TomoPy toolbox in Python.
- Keyword:
- X-ray microtomography, synchrotron, in situ, 4D materials science, irregular eutectic, growth, and solidification
- Citation to related publication:
- Moniri, S., Xiao, X., & Shahani, A. J. (2019). The mechanism of eutectic modification by trace impurities. Scientific Reports, 9(1), 3381. https://doi.org/10.1038/s41598-019-40455-3
- Discipline:
- Engineering
-
- Creator:
- Gliske, Stephen V and Stacey, William C
- Description:
- This data is part of a large program to translate detection and interpretation of HFOs into clinical use. A zip file is included which contains hfo detections, metadata, and Matlab scripts. The matlab scripts analyze this input data and produce figures as in the referenced paper (note: the blind source separation method is stochastic, and so the figures may not be exactly the same). A file "README.txt" provides more detail about each individual file within the zip file.
- Keyword:
- hfo, high frequency oscillation, ripple, fast ripple, blind source separation, non-negative matrix factorization, and temporal variability
- Discipline:
- Science, Engineering, and Health Sciences
-
- Creator:
- Carlevaris-Bianco, Nicholas , Ushani, Arash , and Eustice, Ryan
- Description:
- This is a large scale, long-term autonomy dataset for robotics research collected on the University of Michigan’s North Campus. The dataset consists of omnidirectional imagery, 3D lidar, planar lidar, GPS, and proprioceptive sensors for odometry collected using a Segway robot. The dataset was collected to facilitate research focusing on longterm autonomous operation in changing environments. The dataset is comprised of 27 sessions spaced approximately biweekly over the course of 15 months. The sessions repeatedly explore the campus, both indoors and outdoors, on varying trajectories, and at different times of the day across all four seasons. This allows the dataset to capture many challenging elements including: moving obstacles (e.g., pedestrians, bicyclists, and cars), changing lighting, varying viewpoint, seasonal and weather changes (e.g., falling leaves and snow), and long-term structural changes caused by construction projects. To further facilitate research, we also provide ground-truth pose for all sessions in a single frame of reference. and A detailed description of the dataset and the methods used to generate it is in the document nclt.pdf. If you use this dataset in your research please cite: Carlevaris-Bianco, N., Ushani, A., Eustice, R. (2021). The University of Michigan North Campus Long-Term Vision and LIDAR Dataset [Data set]. University of Michigan - Deep Blue. https://doi.org/10.7302/7rnm-6a03
- Keyword:
- Long-term SLAM, place recognition, lidar, computer vision, and field and service robotics
- Citation to related publication:
- Carlevaris-Bianco, Nicholas, et al. “University of Michigan North Campus Long-Term Vision and Lidar Dataset.” The International Journal of Robotics Research, vol. 35, no. 9, Aug. 2016, pp. 1023–1035, doi:10.1177/0278364915614638.
- Discipline:
- Engineering
-
- Creator:
- Regoli, Leonardo H.
- Description:
- The data contained in the file comprises those collected during the characterization of the sensor as described in the article "Investigation of a low-cost magneto-inductive magnetometer for space science applications" (cited below). This includes:, Resolution , Stability , Linearity , and Frequency response
- Keyword:
- magnetometer, magnetic fields, CubeSat, and geomagnetic activity
- Discipline:
- Engineering
-
- Creator:
- Sick, Volker , Reuss, David L, and Greene, Mark L
- Description:
- This archive contains data files from spark-ignited homogeneous combustion internal combustion engine experiments. Included are high-resolution two-dimensional two-component velocity fields acquired at two 5 x 6 mm regions, one near the head and one near the piston. Crank angle resolved heat flux measurements were made at a third location in the head. The engine was operated at 40 kPa, 500 and 1300 RPM, motor and fired. Included are in-cylinder pressure measurements, external pressure and temperature data, as well as details on the geometry of the optical engine to enable setups of simulation configurations.
- Keyword:
- combustion, internal combustion engine, heat Transfer, particle image velocimetry, in-cylinder flow, TCC III engine , optical engine, CFD validation, PIV, boundary layer, and turbulence
- Discipline:
- Engineering
-
- Creator:
- Fries, Kevin J
- Description:
- This data is in support of the publication in review "Using sensor data to dynamically map large-scale models to site-scale forecasts: A case study using the National Water Model". It is all the raw data extracted from the NWM flow forecasts for Iowa and the IFIS stage readings. For the NWM data, each date has it's own tab-delimited file with columns being the time (hrs) and rows being the NHD site. For the IFIS gages, each tab delimited file is for a single site for the period of record.
- Keyword:
- student-friendly
- Discipline:
- Engineering
-
- Creator:
- Mathews, Elizabeth and Verhoff, Frank
- Description:
- Each pdf is an electronic version of the paper output for each experiment. Each text file is the electronic version of the data on the computer cards for each experiment. These text files are directly readable by Excel. Once in Excel, the data can be manipulated as desired. Additional information is in the theses.
- Keyword:
- Two Liquid Phase Processes, Droplet Size and Concentration, Population Balances, and Dispersed Phase Mixing
- Discipline:
- Science and Engineering
-
- Creator:
- Mathieu, Johanna L, Balzano, Laura, and Ledva, Gregory S
- Description:
- This data set contains the relevant time series for constructing and testing electricity load models within the related paper. The files within are a '.mat' file that contains the data and a 'readme.txt' file detailing the contents of the data.
- Keyword:
- Output feedback, Online learning, Machine learning, Real-time filtering, and Energy disaggregation
- Discipline:
- Engineering
-
- Creator:
- Schiffmann, Philipp, Sick, Volker, and Reuss, David L
- Description:
- This archive contains data files from spark-ignited homogenous combustion internal combustion engine experiments. Included are two-dimensional two-component velocity fields from various measurement planes with maximized field of view, in-cylinder pressure measurements, external pressure and temperature data, as well as details on the geometry of the optical engine to enable setups of simulation configurations. Fired operation was with stoichiometric propane air, 40kPa MAP, at 1300 RPM.
- Keyword:
- TCC III engine, internal combustion engine, particle image velocimetry, in-cylinder flow, turbulence in engines, CFD validation data, cyclic variability, optical engine, combustion variability, and PIV
- Citation to related publication:
- dx.doi.org/10.1177/1468087417720558
- Discipline:
- Engineering
-
- Creator:
- Schiffmann, Philipp, Sick, Volker, and Reuss, David L
- Description:
- This archive contains data files from spark-ignited homogenous combustion internal combustion engine experiments. Included are two-dimensional two-component velocity fields acquired in a small, high-resolution field of view near the spark plug, and images of hydroxyl radical chemiluminescence recording the early flame-kernel growth. Included are in-cylinder pressure measurements, external pressure and temperature data, as well as details on the geometry of the optical engine to enable setups of simulation configurations. Included are tables of one-per-cycle parameters for each test with methane or propane at stoichiometric, dilute limit, lean limit, and rich limit, operation conducted at 40kPa and 1300 RPM.
- Keyword:
- OH* imaging, TCC III engine, internal combustion engine, particle image velocimetry, in-cylinder flow, turbulence in engines, CFD validation data, cyclic variability, early flame kernel growth, optical engine, combustion variability, ignition, and PIV
- Citation to related publication:
- dx.doi.org/10.1177/1468087417720558
- Discipline:
- Engineering