Search Constraints
Number of results to display per page
View results as:
Search Results
-
- Creator:
- Wang, Yeqing, Gao, Jianrong, Ren, Yang, De Andrade, Vincent, and Shahani, Ashwin J
- Description:
- The data file contains (1) the grayscale images of the nano-tomography experiments that can be segmented into binary images and visualized to show the 3D morphology of three-phase spiral eutectics; and (2) Scanning electron micro of solidified sample.
- Keyword:
- Zinc alloys, spiral structure, thermodynamic calculations, synchrotron X-ray diffraction, and synchrotron X-ray nano-tomography
- Discipline:
- Engineering
-
- Creator:
- Hegedus, Alexander M
- Description:
- This is the README for the LunarSynchrotronArray package, maintained by Dr. Alex Hegedus alexhege@umich.edu This code repository corresponds to the Hegedus et al. 2020 (accepted) Radio Science paper, "Measuring the Earth's Synchrotron Emission from Radiation Belts with a Lunar Near Side Radio Array". The arxiv link for the paper is https://arxiv.org/abs/1912.04482. The DOI link is https://doi.org/10.1029/2019RS006891 , The Earth's Ionosphere is home to a large population of energetic electrons that live in the balance of many factors including input from the Solar wind, and the influence of the Earth's magnetic field. These energetic electrons emit radio waves as they traverse Earth's magnetosphere, leading to short‐lived, strong radio emissions from local regions, as well as persistent weaker emissions that act as a global signature of the population breakdown of all the energetic electrons. Characterizing this weaker emission (Synchrotron Emission) would lead to a greater understanding of the energetic electron populations on a day to day level. A radio array on the near side of the Moon would always be facing the Earth, and would well suited for measuring its low frequency radio emissions. In this work we simulate such a radio array on the lunar near side, to image this weaker synchrotron emission. The specific geometry and location of the test array were made using the most recent lunar maps made by the Lunar Reconnaissance Orbiter. This array would give us unprecedented day to day knowledge of the electron environment around our planet, providing reports of Earth's strong and weak radio emissions, giving both local and global information. , This set of codes should guide you through making the figures in the paper, as well as hopefully being accessible enough for changing the code for your own array. I would encourage you to please reach out to collaborate if that is the case! Requirements: , and CASA 4.7.1 (or greater?) built on python 2.7 Example link for Red Hat 7 https://casa.nrao.edu/download/distro/casa/release/el7/casa-release-4.7.1-el7.tar.gz Users may follow this guide to download and install the correct version of CASA for their system https://casa.nrao.edu/casadocs/casa-5.5.0/introduction/obtaining-and-installing CASA executables should be fairly straightforward to extract from the untarred files. gcc 4.8.5 or above (or below?) GCC installation instructions can be found here: https://gcc.gnu.org/install/ SPICE (I use cspice here) https://naif.jpl.nasa.gov/naif/toolkit_C.html As seen in lunar_furnsh.txt which loads the SPICE kernels, you also must download KERNELS_TO_LOAD = ( '/home/alexhege/SPICE/LunarEph/moon_pa_de421_1900-2050.bpc' '/home/alexhege/SPICE/LunarEph/moon_080317.tf' '/home/alexhege/SPICE/LunarEph/moon_assoc_me.tf' '/home/alexhege/SPICE/LunarEph/pck00010.tpc' '/home/alexhege/SPICE/LunarEph/naif0008.tls' '/home/alexhege/SPICE/LunarEph/de430.bsp' ) All of which can be found at https://naif.jpl.nasa.gov/pub/naif/generic_kernels/ SLDEM2015_128_60S_60N_000_360_FLOAT.IMG for the lunar surface data by LRO LOLA found at http://imbrium.mit.edu/DATA/SLDEM2015/GLOBAL/FLOAT_IMG/
- Citation to related publication:
- Hegedus, A., Nenon, Q., Brunet, A., Kasper, J., Sicard, A., Cecconi, B., MacDowall, R., & Baker, D. (2019). Measuring the Earth's Synchrotron Emission from Radiation Belts with a Lunar Near Side Radio Array. https://arxiv.org/abs/1912.04482 and Hegedus, A., Nenon, Q., Brunet, A., Kasper, J., Sicard, A., Cecconi, B., MacDowall, R., & Baker, D. (2020). Radio Science. https://doi.org/10.1029/2019RS006891
- Discipline:
- Engineering and Science
-
- Creator:
- Brandt, Daniel, A. and Ridley, Aaron, J.
- Description:
- The research that produced this data focused on conducting a statistical comparison between horizontal winds modeled with GITM and those derived from the accelerometer aboard the GOCE satellite. The winds from GITM and GOCE were compared by constructing their respective probability densities under different levels of geomagnetic activity, and by distributing them as a function of geomagnetic activity, magnetic latitude, magnetic local time, day-of-the-year, and solar radio flux.
- Keyword:
- Thermosphere, GITM, GOCE, Neutral winds, and Thermospheric modeling
- Discipline:
- Science and Engineering
-
- Creator:
- Smith, Joeseph P., Gronewold, Andrew D., Read, Laura, Crooks, James L., School for Environment and Sustainability, University of Michigan, Department of Civil and Environmental Engineering, University of Michigan, and Cooperative Institute for Great Lakes Research, University of Michigan
- Description:
- Using the statistical programming package R ( https://cran.r-project.org/), and JAGS (Just Another Gibbs Sampler, http://mcmc-jags.sourceforge.net/), we processed multiple estimates of the Laurentian Great Lakes water balance components -- over-lake precipitation, evaporation, lateral tributary runoff, connecting channel flows, and diversions -- feeding them into prior distributions (using data from 1950 through 1979), and likelihood functions. The Bayesian Network is coded in the BUGS language. Water balance computations assume that monthly change in storage for a given lake is the difference between beginning of month water levels surrounding each month. For example, the change in storage for June 2015 is the difference between the beginning of month water level for July 2015 and that for June 2015., More details on the model can be found in the following summary report for the International Watersheds Initiative of the International Joint Commission, where the model was used to generate a new water balance historical record from 1950 through 2015: https://www.glerl.noaa.gov/pubs/fulltext/2018/20180021.pdf. Large Lake Statistical Water Balance Model (L2SWBM): https://www.glerl.noaa.gov/data/WaterBalanceModel/, and This data set has a shorter timespan to accommodate a prior which uses data not used in the likelihood functions.
- Keyword:
- Water, Balance, Great Lakes, Laurentian, Machine Learning, Machine, Learning, Lakes, Bayesian, and Network
- Citation to related publication:
- Smith, J., Gronewald, A. et al. Summary Report: Development of the Large Lake Statistical Water Balance Model for Constructing a New Historical Record of the Great Lakes Water Balance. Submitted to: The International Watersheds Initiative of the International Joint Commission. Accessible at https://www.glerl.noaa.gov/pubs/fulltext/2018/20180021.pdf, Large Lake Statistical Water Balance Model (L2SWBM). https://www.glerl.noaa.gov/data/WaterBalanceModel/, and Gronewold, A.D., Smith, J.P., Read, L. and Crooks, J.L., 2020. Reconciling the water balance of large lake systems. Advances in Water Resources, p.103505.
- Discipline:
- Science and Engineering
-
- Creator:
- Batterman, Stuart; University of Michigan
- Description:
- We evaluated PM levels at the Agbogbloshie e-waste and scrap yard site in Accra, Ghana, and at upwind and downwind locations. This monitoring forms part of the West Africa-Michigan Charter II for GEOHealth cohort study, which is analyzing occupational exposures and health risks at this site.
- Keyword:
- Air pollution, particulate matter, e-waste, Fires, and monitoring
- Citation to related publication:
- Kwarteng, L., Baiden, E. A., Fobil, J., Arko-Mensah, J., Robins, T., & Batterman, S. (2020). Air Quality Impacts at an E-Waste Site in Ghana Using Flexible, Moderate-Cost and Quality-Assured Measurements. GeoHealth, 4(8), e2020GH000247. https://doi.org/10.1029/2020GH000247
- Discipline:
- Health Sciences and Engineering
-
- Creator:
- Agnit Mukhopadhyay
- Description:
- Conducting quantitative metrics-based performance analysis of first-principles-based global magnetosphere models is an essential step in understanding their capabilities and limitations, and providing scope for improvements in order to enhance their space weather prediction capabilities for a range of solar conditions. In this study, a detailed comparison of the performance of three global magnetohydrodynamic (MHD) models in predicting the Earth’s magnetopause location and ionospheric cross polar cap potential (CPCP) has been presented. Using the Community Coordinated Modeling Center’s Run-on-Request system and extensive database on results from various magnetospheric scenarios simulated for a variety of solar wind conditions, the aforementioned model predictions have been compared for magnetopause standoff distance estimations obtained from six empirical models, and with cross polar cap potential estimations obtained from the Assimmilative Mapping of Ionospheric Electrodynamics (AMIE) Model and the Super Dual Auroral Radar Network (SuperDARN) observations. We have considered a range of events spanning different space weather activity to analyze the performance of these models. Using a fit performance metric analysis for each event, we have quantified the models’ reproducibility of magnetopause standoff distances and CPCP against empirically-predicted observations, and identified salient features that govern the performance characteristics of the modeled magnetospheric and ionospheric quantities.
- Citation to related publication:
- Mukhopadhyay, A., Jia, X., Welling, D. T., & Liemohn, M. W. (2021). Global Magnetohydrodynamic Simulations: Performance Quantification of Magnetopause Distances and Convection Potential Predictions. Frontiers in Astronomy and Space Sciences, 8. https://doi.org/10.3389/fspas.2021.637197
- Discipline:
- Engineering and Science
-
- Creator:
- Pine, Alexandra F and Love, Brian J
- Description:
- This data is from a project concerned with dehydrating samples of saturated superabsorbent polymer using a centrifuge. The goal was to consider centrifugation as an energy efficient scheme to dehydrate SAP with the notion of reusing it. The data provided contains mass fractions of solvent removed through centrifugation with varied parameters.
- Keyword:
- Superabsorbent Polymer
- Citation to related publication:
- Pine, A., Wu, C. C., Raghavan, S., & Love, B. (2021). The efficiency of dehydrating desiccants by centrifugation: An assessment of superabsorbent polymers. Drying Technology, 0(0), 1–8. https://doi.org/10.1080/07373937.2021.1939710
- Discipline:
- Engineering
-
- Creator:
- Weng, Andrew, Mohtat, Peyman, Attia, Peter, Less, Greg, Lee, Suhak, and Stefanopoulou, Anna
- Description:
- The goal of this research is to investigate the impact of fast formation protocol on battery lifetime. The dataset has also been used to explore data-driven approaches in battery lifetime estimation (manuscript under review). Source code used to generate the results for this work has been included. The file contents contain a detailed README.md file which describes the organization of the files.
- Citation to related publication:
- Weng et al., Predicting the impact of formation protocols on battery lifetime immediately after manufacturing, Joule (2021), https://doi.org/10.1016/j.joule.2021.09.015
- Discipline:
- Engineering
-
- Creator:
- Arthurs, Christopher J., Khlebnikov, Rostislav, Melville, Alexander, Marčan, Marija, Gomez, Alberto, Dillon-Murphy, Desmond, Cuomo, Federica, Vieira, Miguel, Schollenberger, Jonas, Lynch, Sabrina, Tossas-Betancourt, Christopher, Iyer, Kritika, Hopper, Sara, Livingston, Elizabeth, Youssefi, Pouya, Noorani, Alia, Ben Ahmed, Sabrina, Nauta, Foeke J.N., van Bakel, Theodorus M.J., Ahmed, Yunus, van Bakel, Petrus A.J., Mynard, Jonathan, Di Achille, Paolo, Gharahi, Hamid, Lau, Kevin D., Filonova, Vasilina, Aguirre, Miquel, Nama, Nitesh, Xiao, Nan, Baek, Seungik, Garikipati, Krishna, Sahni, Onkar, Nordsletten, David, and Figueroa, Carlos A.
- Description:
- This repository includes the following:, - Example Case A: complete process of creating a model, running the simulation and examining the results., - Example Case B: segmenting and imposing a patient-specific aortic inflow velocity profile from a provide PC-MRI dataset., - Example Case C: simulation of a patient under rest conditions, and then of the same patient under post-liver-transplant conditions., - GUI Windows Binary Executable (version 2019.11.01), and - Flow Solver Windows Binary Executable (version 1.4.4, 2019.11.01)
- Keyword:
- Blood Flow Simulation, Patient-specific, Open-source Software, Image-based simulation, Cardiovascular Medical Image, Segmentation, and Finite Element Simulation
- Citation to related publication:
- CRIMSON: An Open-Source Software Framework for Cardiovascular Integrated Modelling and Simulation C.J. Arthurs, R. Khlebnikov, A. Melville, M. Marčan, A. Gomez, D. Dillon-Murphy, F. Cuomo, M.S. Vieira, J. Schollenberger, S.R. Lynch, C. Tossas-Betancourt, K. Iyer, S. Hopper, E. Livingston, P. Youssefi, A. Noorani, S. Ben Ahmed, F.J.H. Nauta, T.M.J. van Bakel, Y. Ahmed, P.A.J. van Bakel, J. Mynard, P. Di Achille, H. Gharahi, K. D. Lau, V. Filonova, M. Aguirre, N. Nama, N. Xiao, S. Baek, K. Garikipati, O. Sahni, D. Nordsletten, C.A. Figueroa bioRxiv 2020.10.14.339960; doi: https://doi.org/10.1101/2020.10.14.339960
- Discipline:
- Engineering and Health Sciences
-
- Creator:
- Figueroa, C. Alberto
- Description:
- This .stl file represents the largest vessels of the cerebral circulation, specifically around the Circle of Willis. The file was created from a Computed Tomography Angiography (CTA) of a relatively healthy patient. It consisted of a 512 x 512 x 709 voxel image with a resolution of 0:35 mm x 0:35 mm x 0:5 mm. The model includes the basilar artery (1), left and right internal carotid arteries (2, and 3), left and right anterior cerebral arteries (4, and 5), left and right middle cerebral arteries (6, and 7), left and right posterior cerebral arteries (8, and 9), and various communicating arteries (10, 11, and 12).
- Keyword:
- Circle of Willis, Blood flow simulation, Hemodynamics, and Benchmarking blood flow
- Citation to related publication:
- N. Wilson, K. Wang, R. Dutton, C.A. Taylor, "A software framework for creating patient specific geometric models from medical imaging data for simulation based medical planning of vascular surgery", Medical Image Computing and Computer-Assisted Intervention MICCAI 2001, Springer, 2001, pp. 449–456. doi: 10.1007/3-540-45468-3_54 and N. Xiao, J.D. Humphrey, C.A. Figueroa, "Multi-Scale Computational Model of Three-Dimensional Hemodynamics within a Deformable Full-Body Arterial Network”, Journal of Computational Physics, 2013, Vol 244, pp. 22-40. doi: 10.1016/j.jcp.2012.09.016
- Discipline:
- Engineering and Health Sciences