The contained data comprises what was collected during the characterization of the quad-magnetometer as described in 'Quad-Mag Board for CubeSat Applications'. There are approximately 38 hours of data that compromise a stability test, 10 hours of noise floor testing data, and 10 minutes of sensitivity testing data. Each data file has three-axis measurements from four individual magnetometers over the specified time period at a 65 Hz sampling rate.
Strabel, B. P., Regoli, L. H., Moldwin, M. B., Ojeda, L. V., Shi, Y., Thoma, J. D., Narrett, I. S., Bronner, B., and Pellioni, M.: Quad-Mag board for CubeSat applications, Geosci. Instrum. Method. Data Syst., 11, 375–388, https://doi.org/10.5194/gi-11-375-2022, 2022.
The data contained in the file comprises those collected during the characterization of the sensor as described in the article "Investigation of a low-cost magneto-inductive magnetometer for space science applications" (cited below). This includes:, Resolution
, Stability
, Linearity
, and Frequency response
Regoli, L. H., Moldwin, M. B., Pellioni, M., Bronner, B., Hite, K., Sheinker, A., & Ponder, B. M.: Investigation of a low-cost magneto-inductive magnetometer for space science applications, Geosci. Instrum. Method. Data Syst., 7, 129-142, https://doi.org/10.5194/gi-2017-53, 2018.
