Search Constraints
Number of results to display per page
View results as:
Search Results
-
- Creator:
- Sick, Volker , Reuss, David L, and Greene, Mark L
- Description:
- This archive contains data files from spark-ignited homogeneous combustion internal combustion engine experiments. Included are high-resolution two-dimensional two-component velocity fields acquired at two 5 x 6 mm regions, one near the head and one near the piston. Crank angle resolved heat flux measurements were made at a third location in the head. The engine was operated at 40 kPa, 500 and 1300 RPM, motor and fired. Included are in-cylinder pressure measurements, external pressure and temperature data, as well as details on the geometry of the optical engine to enable setups of simulation configurations.
- Keyword:
- combustion, internal combustion engine, heat Transfer, particle image velocimetry, in-cylinder flow, TCC III engine , optical engine, CFD validation, PIV, boundary layer, and turbulence
- Discipline:
- Engineering
-
- Creator:
- Regoli, Leonardo H.
- Description:
- The data contained in the file comprises those collected during the characterization of the sensor as described in the article "Investigation of a low-cost magneto-inductive magnetometer for space science applications" (cited below). This includes:, Resolution , Stability , Linearity , and Frequency response
- Keyword:
- magnetometer, magnetic fields, CubeSat, and geomagnetic activity
- Discipline:
- Engineering
-
- Creator:
- Carlevaris-Bianco, Nicholas , Ushani, Arash , and Eustice, Ryan
- Description:
- This is a large scale, long-term autonomy dataset for robotics research collected on the University of Michigan’s North Campus. The dataset consists of omnidirectional imagery, 3D lidar, planar lidar, GPS, and proprioceptive sensors for odometry collected using a Segway robot. The dataset was collected to facilitate research focusing on longterm autonomous operation in changing environments. The dataset is comprised of 27 sessions spaced approximately biweekly over the course of 15 months. The sessions repeatedly explore the campus, both indoors and outdoors, on varying trajectories, and at different times of the day across all four seasons. This allows the dataset to capture many challenging elements including: moving obstacles (e.g., pedestrians, bicyclists, and cars), changing lighting, varying viewpoint, seasonal and weather changes (e.g., falling leaves and snow), and long-term structural changes caused by construction projects. To further facilitate research, we also provide ground-truth pose for all sessions in a single frame of reference. and A detailed description of the dataset and the methods used to generate it is in the document nclt.pdf. If you use this dataset in your research please cite: Carlevaris-Bianco, N., Ushani, A., Eustice, R. (2021). The University of Michigan North Campus Long-Term Vision and LIDAR Dataset [Data set]. University of Michigan - Deep Blue. https://doi.org/10.7302/7rnm-6a03
- Keyword:
- Long-term SLAM, place recognition, lidar, computer vision, and field and service robotics
- Citation to related publication:
- Carlevaris-Bianco, Nicholas, et al. “University of Michigan North Campus Long-Term Vision and Lidar Dataset.” The International Journal of Robotics Research, vol. 35, no. 9, Aug. 2016, pp. 1023–1035, doi:10.1177/0278364915614638.
- Discipline:
- Engineering
-
- Creator:
- Gliske, Stephen V and Stacey, William C
- Description:
- This data is part of a large program to translate detection and interpretation of HFOs into clinical use. A zip file is included which contains hfo detections, metadata, and Matlab scripts. The matlab scripts analyze this input data and produce figures as in the referenced paper (note: the blind source separation method is stochastic, and so the figures may not be exactly the same). A file "README.txt" provides more detail about each individual file within the zip file.
- Keyword:
- hfo, high frequency oscillation, ripple, fast ripple, blind source separation, non-negative matrix factorization, and temporal variability
- Discipline:
- Science, Engineering, and Health Sciences
-
- Creator:
- Moniri, Saman, Xiao, Xianghui, and Shahani, Ashwin J.
- Description:
- The data file is comprised of 22,500 X-ray projections (15 scans of 1500 projections each) recorded during solidification of Al-Ge-Na. The raw data file is in .hdf format and can be reconstructed into .tiff, e.g., by using the TomoPy toolbox in Python.
- Keyword:
- X-ray microtomography, synchrotron, in situ, 4D materials science, irregular eutectic, growth, and solidification
- Citation to related publication:
- Moniri, S., Xiao, X., & Shahani, A. J. (2019). The mechanism of eutectic modification by trace impurities. Scientific Reports, 9(1), 3381. https://doi.org/10.1038/s41598-019-40455-3
- Discipline:
- Engineering
-
- Creator:
- Nguyen, Thanh H., Wright, Mason, Wellman, Michael P., and Singh, Satinder
- Description:
- In this work , we study the problem of allocating limited security countermeasures to protect network data from cyber-attacks, for scenarios modeled by Bayesian attack graphs. We consider multi-stage interactions between a network administrator and cybercriminals, formulated as a security game. We propose parameterized heuristic strategies for the attacker and defender and provide detailed analysis of their time complexity. Our heuristics exploit the topological structure of attack graphs and employ sampling methods to overcome the computational complexity in predicting opponent actions. Due to the complexity of the game, we employ a simulation-based approach and perform empirical game analysis over an enumerated set of heuristic strategies. Finally, we conduct experiments in various game settings to evaluate the performance of our heuristics in defending networks, in a manner that is robust to uncertainty about the security environment.
- Keyword:
- Empirical Game-Theoretic Analysis, Multi-stage Security Games, Attack Graph, Game Theory, and Moving Target Defense
- Discipline:
- Science and Engineering
-
- Creator:
- Mirshams Shahshahani, Payam
- Description:
- Investigating minimum human reaction times is often confounded by the motivation, training, and state of arousal of the subjects. We used the reaction times of athletes competing in the shorter sprint events in the Athletics competitions in recent Olympics (2004-2016) to determine minimum human reaction times because there's little question as to their motivation, training, or state of arousal. The reaction times of sprinters however are only available on the IAAF web page for each individual heat, in each event, at each Olympic. Therefore we compiled all these data into two separate excel sheets which can be used for further analyses.
- Keyword:
- minimum reaction time, sprinter, Olympics, Athletics, sex difference, starting block, and false start
- Citation to related publication:
- Mirshams Shahshahani P, Lipps DB, Galecki AT, Ashton-Miller JA (2018) On the apparent decrease in Olympic sprinter reaction times. PLoS ONE 13(6): e0198633. https://doi.org/10.1371/journal.pone.0198633
- Discipline:
- Engineering, Health Sciences, Science, Other, and General Information Sources
-
- Creator:
- Isaacoff, Benjamin P., Li, Yilai, Lee, Stephen A., and Biteen, Julie S.
- Description:
- This is the experimental data referenced in our manuscript entitled “SMALL-LABS: An algorithm for measuring single molecule intensity and position in the presence of obscuring backgrounds .” These live-cell single-molecule imaging movies were used as a test of the SMALL-LABS single-molecule image analysis algorithm. The dataset comprises two movies; each one is provided both as a .tif stack and as an .avi file. The movie called “low_bg” has a standard low background, and the movie called “high_bg” includes a high fluorescent background produced by an external 488-nm laser.
- Keyword:
- single-molecule, microscopy, image analysis, mirobiology, and bacteria
- Citation to related publication:
- B.P. Isaacoff, Y. Li, S.A. Lee, J.S. Biteen, "SMALL-LABS: Measuring Single-Molecule Intensity and Position in Obscuring Backgrounds." Biophysical Journal, 975-982, 116, 2019. https://doi.org/10.1016/j.bpj.2019.02.006
- Discipline:
- Engineering and Science
-
- Creator:
- Reed, Matthew P., Boyle, K.
- Description:
- This is the first physical anthropomorphic test device to be based both on statistical body shape models as well as 3D printing.
- Keyword:
- Child Belt Fit Manikin
- Discipline:
- Engineering
-
- Creator:
- Figueroa, C. Alberto
- Description:
- This information provides the data and commands to manually setup the computational simulations used in the PLOS ONE paper 'Patient-specific modeling of right coronary circulation vulnerability post-liver transplant in Alagille’s syndrome' using CRIMSON (CARDIOVASCULAR INTEGRATED MODELLING & SIMULATION) a prototype simulation environment developed under the support of the European Research Council (( http://www.crimson.software/)., Note that a Windows version of the CRIMSON flowsolver is provided as part of the CRIMSON Windows installer, but you will need a very powerful Windows computer to run these simulations, as the models used in the present work are extremely computationally-demanding. It is recommended that you use a Linux version of the CRIMSON flowsolver on a high-performance computer., Option 1 (ready-to-use files to immediately start the simulation): 1. Please unzip the Ready-to-use files. 2. Copy the folders of each of the three conditions to the high performance computer. 3. In addition to different codes used, each folder provides the boundary conditions applied in the simulations described in the manuscript (e.g. LPN parameters). To run the 3D simulations for each condition simply launch the it using the CRIMSON flowsolver. In addition, the solver.inp file can be modified to run a 0D "real-time simulation" (please open solver.inp with a text editor and modify line 4 "Simulate in Purely Zero Dimensions:" to "True")., Option 2 (using the MITK files): 1. Please download and install Crimson software ( http://www.crimson.software/). 2. Please unzip the MITK files and the Ready-to-use files. 3. From amongst the provided MITK files, load the MITK file of interest to CRIMSON (using the MITK files, additional changes can be made to the computational model in case the user wants to explore different settings/boundary conditions e.g. change the vascular wall properties, introducing a change in the geometry to create a virtual stenosis). 3. Navigate to the tree in the "Data Manager" panel and select the "Pulmonaries", "CRIMSON SOLVER" and then "Solver study 3D" items, in the described order. 4. In the right hand panel select the "CRIMSON Solver setup" tab and scroll down the right hand bar until to find the "Setup Solver" box; click to output the simulation files (faceInfo.dat, geombc.dat.1, multidomain.dat, netlist_surface.dat,numstart.dat, presolver folder, solver.inp, restart.0.1). 5. Copy and replace the geombc.dat.1 and restart.0.1 generated by CRIMSON for each individual condition to the respective unziped folder in the Ready-to-use file (discard the remaining files that were output by CRIMSON). Note that if you have not changed anything about the model (e.g. vascular wall properties), then doing this will produce restart.0.1 and geombc.dat.1 files which are identical to the ready-to-use versions. 6. Finally copy each Condition folder to the high performance computer and simply launch the simulation using the CRIMSON flowsolver., and For technical queries please contact crimson-users@googlegroups.com. --October 2018.
- Citation to related publication:
- Silva Vieira M, Arthurs CJ, Hussain T, Razavi R, Figueroa CA (2018) Patient-specific modeling of right coronary circulation vulnerability post-liver transplant in Alagille’s syndrome. PLOS ONE 13(11): e0205829. https://doi.org/10.1371/journal.pone.0205829
- Discipline:
- Engineering and Health Sciences