View Item 

Show simple item record

Elevated-Temperature Mechanical Properties of Silicon Nitride/Boron Nitride Fibrous Monolithic Ceramics
dc.contributor.authorTrice, Rodney W.en_US
dc.contributor.authorHalloran, John W.en_US
dc.date.accessioned2010-04-01T15:16:11Z
dc.date.available2010-04-01T15:16:11Z
dc.date.issued2000-02en_US
dc.identifier.citationTrice, Rodney W.; Halloran, John W. (2000). "Elevated-Temperature Mechanical Properties of Silicon Nitride/Boron Nitride Fibrous Monolithic Ceramics." Journal of the American Ceramic Society 83(2): 311-316. <http://hdl.handle.net/2027.42/65741>en_US
dc.identifier.issn0002-7820en_US
dc.identifier.issn1551-2916en_US
dc.identifier.urihttps://hdl.handle.net/2027.42/65741
dc.format.extent2198543 bytes
dc.format.extent3110 bytes
dc.format.mimetypeapplication/pdf
dc.format.mimetypetext/plain
dc.publisherAmerican Ceramics Societyen_US
dc.publisherBlackwell Publishing Ltden_US
dc.rights2004 The American Ceramics Societyen_US
dc.subject.otherMechanical Propertiesen_US
dc.subject.otherSilicon Nitrideen_US
dc.subject.otherBoron Nitrideen_US
dc.titleElevated-Temperature Mechanical Properties of Silicon Nitride/Boron Nitride Fibrous Monolithic Ceramicsen_US
dc.typeArticleen_US
dc.rights.robotsIndexNoFollowen_US
dc.subject.hlbsecondlevelMaterials Science and Engineeringen_US
dc.subject.hlbtoplevelEngineeringen_US
dc.description.peerreviewedPeer Revieweden_US
dc.contributor.affiliationumMaterials Science and Engineering Department, University of Michigan, Ann Arbor, Michigan 48109-2136en_US
dc.description.bitstreamurlhttp://deepblue.lib.umich.edu/bitstream/2027.42/65741/1/j.1151-2916.2000.tb01191.x.pdf
dc.identifier.doi10.1111/j.1151-2916.2000.tb01191.xen_US
dc.identifier.sourceJournal of the American Ceramic Societyen_US
dc.identifier.citedreferenceS. Baskaran, S. D. Nunn, D. Popovic, and J. W. Halloran, “ Fibrous Monolithic Ceramics: I, Fabrication, Microstructure, and Indentation Behavior,” J. Am. Ceram. Soc., 76 [ 9 ] 2209 – 16 ( 1993 ).en_US
dc.identifier.citedreferenceS. Baskaran, and J. W. Halloran, “ Fibrous Monolithic Ceramics: II, Flexural Strength and Fracture Behavior of the Silicon Carbide/Graphite System,” J. Am. Ceram. Soc., 76 [ 9 ] 2217 – 24 ( 1993 ).en_US
dc.identifier.citedreferenceS. Baskaran, and J. W. Halloran, “ Fibrous Monolithic Ceramics: III, Mechanical Properties and Oxidation Behavior of the Silicon Carbide/Boron Nitride System,” J. Am. Ceram. Soc., 77 [ 5 ] 1249 – 55 ( 1994 ).en_US
dc.identifier.citedreferenceS. Baskaran, S. D. Nunn, and J. W. Halloran, “ Fibrous Monolithic Ceramics: IV, Mechanical Properties and Oxidation Behavior of the Alumina/Nickel System,” J. Am. Ceram. Soc., 77 [ 5 ] 1256 – 62 ( 1994 ).en_US
dc.identifier.citedreferenceG. Hilmas, A. Brady, U. Abdali, G. Zywicki, and J. Halloran, “ Fibrous Monoliths: Nonbrittle Fracture from Powder-Processed Ceramics,” Mater. Sci. Eng., A, 195, 263 – 68 ( 1995 ).en_US
dc.identifier.citedreferenceW. J. Clegg, K. Kendall, N. McN. Alford, T. W. Button, and J. D. Birchall, “ A Simple Way to Make Tough Ceramics,” Nature (London), 357 [ October 4 ] 455 – 57 ( 1990 ).en_US
dc.identifier.citedreferenceA. J. Phillipps, W. J. Clegg, and T. W. Clyne, “ Fracture Behavior of Ceramic Laminates in Bending-I. Modeling of Crack Propagation,” Acta Metall., 41 [ 3 ] 805 – 17 ( 1993 ).en_US
dc.identifier.citedreferenceM.-Y. He, and J. W. Hutchinson, “ Crack Deflection at an Interface Between Dissimilar Elastic Materials,” Int. J. Solids Struct., 25 [ 9 ] 1053 – 67 ( 1989 ).en_US
dc.identifier.citedreferenceD. Kovar, M. D. Thouless, and J. W. Halloran, “ Crack Deflection and Propagation in Layered Silicon Nitride/Boron Nitride Ceramics,” J. Am. Ceram. Soc., 81 [ 4 ] 1004 – 12 ( 1998 ).en_US
dc.identifier.citedreferenceC. A. Folsom, F. W. Zok, and F. F. Lange, “ Flexural Properties of Brittle Multilayer Materials: I, Modeling,” J. Am. Ceram. Soc., 77 [ 3 ] 689 – 96 ( 1994 ).en_US
dc.identifier.citedreferenceD. Kovar, B. H. King, R. W. Trice, and J. W. Halloran, “ Fibrous Monolithic Ceramics,” J. Am. Ceram. Soc., 80 [ 10 ] 2471 – 87 ( 1997 ).en_US
dc.identifier.citedreferenceB. H. King, and J. W. Halloran, “ Fibrous Monolithic Ceramic Laminates I: Properties and Behavior of Unidirectional Laminates,” unpublished work.en_US
dc.identifier.citedreferenceG. A. Brady, “ Silicon Nitride/Boron Nitride Fibrous Monolithic Ceramics ”; Master's Thesis. University of Michigan, Ann Arbor, MI, 1996.en_US
dc.identifier.citedreferenceD. R. Clarke, and G. Thomas, “ Grain Boundary in a Hot-Pressed MgO Fluxed Silicon Nitride,” J. Am. Ceram. Soc., 60 [ 11 – 12 ] 491 – 95 ( 1977 ).en_US
dc.identifier.citedreferenceL. K. V. Lou, T. E. Mitchell, and A. H. Heuer, “ Impurity Phases in Hot-Pressed Si 3 N 4,” J. Am. Ceram. Soc., 61 [ 9 – 10 ] 392 – 96 ( 1978 ).en_US
dc.identifier.citedreferenceR. L. Tsai, and R. Raj, “ Creep Fracture in Ceramics Containing Small Amounts of a Liquid Phase,” Acta Metall., 30 1043 – 58 ( 1982 ).en_US
dc.identifier.citedreferenceM. D. Thouless, “ A Review of Creep Rupture in Materials Containing an Amorphous Phase,” Res Mech., 22, 213 – 42 ( 1987 ).en_US
dc.identifier.citedreferenceD. E. Wittmer, B. E. Rodely, V. A. Knapp, and S. P. Etherton, “ Comparison of Properties for Formulations Prepared from Two Silicon Nitride Powders,” Ceram. Eng. Sci. Proc., 17 [ 3 ] 363 – 70 ( 1996 ).en_US
dc.identifier.citedreferenceA. W. Moore, “ Characterization of Pyrolytic Boron Nitride for Semiconductor Materials Processing,” J. Cryst. Growth, 106, 6 – 15 ( 1990 ).en_US
dc.identifier.citedreferenceN. J. Archer, “ The Preparation and Properties of Pyrolitic Boron Nitride,” High Temp. Chem. Inorg. Ceram. Mater., Proc. Conf. 1976, 30, 167 – 80 ( 1977 ).en_US
dc.identifier.citedreferenceR. W. Trice, and J. W. Halloran, “ Influence of Microstructure and Temperature on the Interfacial Fracture Energy of Silicon Nitride/Boron Nitride Fibrous Monolithic Ceramics,” J. Am. Ceram. Soc., 82 [ 9 ] 2502 – 508 ( 1999 ).en_US
dc.identifier.citedreferenceG. E. Hilmas, G. A. Brady, and J. W. Halloran, “ SiC and Si 3 N 4 Fibrous Monoliths: Nonbrittle Fracture from Powder-Processed Ceramics Produced by Coextrusion ”; pp. 609 – 14 in Ceramic Transactions, Vol. 51, Fifth International Conference on Ceramic Processing Science and Technology. Edited by H. Hausner, G. L. Messing, and S.-I. Hirano American Ceramic Society, Westerville, OH, 1994.en_US
dc.identifier.citedreferenceR. W. Trice, and J. W. Halloran, “ The Mode I Fracture Toughness of a Small-Grained Silicon Nitride: Orientation, Temperature, and Crack Length Effects,” J. Am. Ceram. Soc., 82 [ 10 ] 2633 – 40 ( 1999 ).en_US
dc.identifier.citedreference24 ASTM Standard C 373-72, American Society for Testing and Materials, West Conshohocken, PA, 1982.en_US
dc.identifier.citedreference25 MIL-STD-1942, “ Flexural Strength of High Performance Ceramics at Ambient Temperatures,” November 1990.en_US
dc.identifier.citedreferenceT. Rouxel, J.-L. Besson, C. Gault, P. Goursat, M. Leigh, and S. Hampshire, “ Viscosity and Young's Modulus of an Oxynitride Glass,” J. Mater. Sci. Lett., 8, 1158 – 60 ( 1989 ).en_US
dc.identifier.citedreferenceW. A. Cutler, F. W. Zok, F. F. Lange, and P. G. Charalambides, “ Delamination Resistance of Two Hybrid Ceramic-Composite Laminates,” J. Am. Ceram. Soc., 80 [ 12 ] 3029 – 37 ( 1997 ).en_US
dc.identifier.citedreferenceJ. A. Todd, and Z.-Y. Xu, “ The High Temperature Creep Deformation of Si 3 N 4 -6Y 2 O 3 -2Al 2 O 3,” J. Mater. Sci., 24, 4443 – 52 ( 1989 ).en_US
dc.owningcollnameInterdisciplinary and Peer-Reviewed


Files in this item

Name:
j.1151-2916.2000.tb01191.x.pdf
Size:
2.096MB
Format:
PDF
View/Open

Show simple item record

Remediation of Harmful Language

The University of Michigan Library aims to describe library materials in a way that respects the people and communities who create, use, and are represented in our collections. Report harmful or offensive language in catalog records, finding aids, or elsewhere in our collections anonymously through our metadata feedback form. More information at Remediation of Harmful Language.

Accessibility

If you are unable to use this file in its current format, please select the Contact Us link and we can modify it to make it more accessible to you.