View Item 

Show simple item record

Binder Removal from Ceramic-Filled Thermoplastic Blends
dc.contributor.authorKnapp, Angela M.en_US
dc.contributor.authorHalloran, John W.en_US
dc.date.accessioned2010-04-01T15:20:07Z
dc.date.available2010-04-01T15:20:07Z
dc.date.issued2006-09en_US
dc.identifier.citationKnapp, Angela M.; Halloran, John W. (2006). "Binder Removal from Ceramic-Filled Thermoplastic Blends." Journal of the American Ceramic Society 89(9): 2776-2781. <http://hdl.handle.net/2027.42/65809>en_US
dc.identifier.issn0002-7820en_US
dc.identifier.issn1551-2916en_US
dc.identifier.urihttps://hdl.handle.net/2027.42/65809
dc.format.extent223575 bytes
dc.format.extent3110 bytes
dc.format.mimetypeapplication/pdf
dc.format.mimetypetext/plain
dc.publisherBlackwell Publishing Incen_US
dc.rights© 2006 The American Ceramic Societyen_US
dc.titleBinder Removal from Ceramic-Filled Thermoplastic Blendsen_US
dc.typeArticleen_US
dc.rights.robotsIndexNoFollowen_US
dc.subject.hlbsecondlevelMaterials Science and Engineeringen_US
dc.subject.hlbtoplevelEngineeringen_US
dc.description.peerreviewedPeer Revieweden_US
dc.contributor.affiliationumMaterials Science and Engineering, University of Michigan, Ann Arbor, Michigan 48109en_US
dc.description.bitstreamurlhttp://deepblue.lib.umich.edu/bitstream/2027.42/65809/1/j.1551-2916.2006.01179.x.pdf
dc.identifier.doi10.1111/j.1551-2916.2006.01179.xen_US
dc.identifier.sourceJournal of the American Ceramic Societyen_US
dc.identifier.citedreferenceJ. A. Lewis, “ Binder Removal from Ceramics,” Annu. Rev. Mater. Sci., 27, 147 – 73 1997.en_US
dc.identifier.citedreferenceT. A. Ring, Fundamentals of Ceramic Powder Processing and Synthesis, Chapter 15, pp. 729 – 75. Academic Press Inc., San Diego, 1996.en_US
dc.identifier.citedreferenceA. T. Crumm and J. W. Halloran, “ Fabrication of Microconfigured Multicomponent Ceramics,” J. Am. Ceram. Soc., 81 [4] 1053 – 7 ( 1998 ).en_US
dc.identifier.citedreferenceY-H Koh, H-W Kim, H-E Kim, and J. W. Halloran, “ Macrochanneled Tetragonal Zirconia Polycrystals Coated by a Calcium Phosphate Layer,” J. Am. Ceram. Soc., 86 [12] 2027 – 30 ( 2003 ).en_US
dc.identifier.citedreferenceE. Turi, Thermal Characterization of Polymeric Materials. Academic Press, New York, 1981.en_US
dc.identifier.citedreferenceK. E. Hrdina and J. W. Halloran, “ Chemistry of Removal of Ethylene Vinyl Acetate Binders,” J. Mater. Sci., 33, 2795 – 803 ( 1998 ).en_US
dc.identifier.citedreferenceK. E. Hrdina and J. W. Halloran, “ Dimensional Changes During Binder Removal in a Moldable Ceramic System,” J. Mater. Sci., 33, 2805 – 15 ( 1998 ).en_US
dc.identifier.citedreferenceA. A. M. Oliveira, M. Kaviany, K. Hrdina, and J. Halloran, “ Mass Diffusion-Controlled Bubbling and Optimal Schedule of Thermal Degradation of Polymeric Binder in Molded Powders,” Int. J. Heat Mass Transfer, 42 [17] 3307 – 29 ( 1999 ).en_US
dc.identifier.citedreferenceJ. K. Wright, J. R. F. Evans, and M. J. Edirisinghe, “ Degradation of Polyolefin Blends Used for Ceramic Injection Molding,” J. Am. Ceram. Soc., 72 [10] 1822 – 8 ( 1989 ).en_US
dc.identifier.citedreferenceR. V. Shende and S. J. Lombardo, “ Determination of Binder Decomposition Kinetics for Specifying Heating Parameters in Binder Burnout Cycles,” J. Am. Ceram. Soc., 81 [4] 1053 – 7 ( 1998 ).en_US
dc.identifier.citedreferenceL. C.-K. Liau, B. Peters, D. S. Krueger, A. Fordon, D. S. Viswanath, and S. J. Lombardo, “ Role of Length Scale on Pressure Increase and Yield of Poly(Vinyl Butyral) Barium Titanate-Platinum Multilayer Ceramic Capacitors During Binder Burnout,” J. Am. Ceram. Soc., 83 [11] 2645 – 53 ( 2000 ).en_US
dc.identifier.citedreferenceM. Trunec and J. Cihlar, “ Thermal Removal of Multicomponent Binder from Ceramic Injection Mouldings,” J. Eur. Ceram. Soc., 22, 2231 – 41 ( 2002 ).en_US
dc.identifier.citedreferenceS. Masia, P. D. Calvert, W. E. Rhine, and H. K. Bowen, “ Effects of Oxides on Binder Burnout During Ceramics Processing,” J. Mater. Sci., 24 [6] 1907 – 12 ( 1989 ).en_US
dc.identifier.citedreferenceYoung-Hag Koh, John W. Halloran, Gullu Kiziltas, Dimitris Psychoudakis, and John Volakis, “ Thermoplastic Green Machining of Textured Dielectric Substrate for Broadband Miniature Antenna,” J. Am. Ceram. Soc., 88 [2] 297 – 302 ( 2005 ).en_US
dc.identifier.citedreferenceG. Kiziltas, D. Psychoudakis, J. L. Volakis, and N. Kikuchi, “ Topology Design Optimization of Dielectric Substrates for Bandwidth Improvement of a Patch Antenna,” IEEE Trans. Antennas Propagat., 51 [10] 2732 – 43 ( 2003 ).en_US
dc.identifier.citedreferenceD. Psychoudakis, A. Knapp, G. Kiziltas, J. L. Volakis, and J. W. Halloran, “ Textured LTCC Substrates for Printed Antenna Miniaturization ”; Proceedings of the IEEE Soceity International Conference, Antennas and Propagation, Vol. 1.3, pp. 375–8, June 2003.en_US
dc.identifier.citedreferenceI. C. McNeill and M. H. Mohammed, “ A Comparison of the Thermal Degradation Behaviour of Ethylene-Ethyl Acrylate Copolymer, Low Density Polyethylene and Poly(Ethyl Acrylate),” Poly. Degrad. Stability, 48 [1] 175 – 87 1995.en_US
dc.identifier.citedreferenceK. Novaković, L. Katsikas, and I. G. Popović, “ The Thermal Degradation of Poly(Iso-Butyl Methacrylate) and Poly(Sec-Butyl Methacrylate),” J. Serb. Chem. Soc., 65 [12] 867 – 75 ( 2000 ).en_US
dc.identifier.citedreferenceK. J. Voorhees, S. F. Baugh, and D. N. Stevenson, “ The Thermal Degradation of Poly(Ethylene Glycol)/Poly(Vinyl Alcohol) Binder in Alumina Ceramics,” Therm. Acta, 274, 187 – 207.en_US
dc.identifier.citedreferenceG. P. Simon (ed.), Polymer Characterization Techniques and Their Application to Blends. Oxford University Press, Oxford, 2003.en_US
dc.owningcollnameInterdisciplinary and Peer-Reviewed


Files in this item

Name:
j.1551-2916.2006.01179.x.pdf
Size:
218.3KB
Format:
PDF
View/Open

Show simple item record

Remediation of Harmful Language

The University of Michigan Library aims to describe its collections in a way that respects the people and communities who create, use, and are represented in them. We encourage you to Contact Us anonymously if you encounter harmful or problematic language in catalog records or finding aids. More information about our policies and practices is available at Remediation of Harmful Language.

Accessibility

If you are unable to use this file in its current format, please select the Contact Us link and we can modify it to make it more accessible to you.