View Item 

Show simple item record

Green Machining of a Thermoplastic Ceramic-Ethylene Ethyl Acrylate/Isobutyl Methacrylate Compound

dc.contributor.authorKoh, Young-Hagen_US
dc.contributor.authorHalloran, John W.en_US
dc.date.accessioned2010-04-01T15:23:36Z
dc.date.available2010-04-01T15:23:36Z
dc.date.issued2004en_US
dc.identifier.citationKoh, Young-Hag; Halloran, John W. (2004). "Green Machining of a Thermoplastic Ceramic-Ethylene Ethyl Acrylate/Isobutyl Methacrylate Compound." Journal of the American Ceramic Society 87(8): 1575-1577. <http://hdl.handle.net/2027.42/65870>en_US
dc.identifier.issn0002-7820en_US
dc.identifier.issn1551-2916en_US
dc.identifier.urihttps://hdl.handle.net/2027.42/65870
dc.format.extent586374 bytes
dc.format.extent3110 bytes
dc.format.mimetypeapplication/pdf
dc.format.mimetypetext/plain
dc.publisherAmerican Ceramics Societyen_US
dc.publisherBlackwell Publishing Ltden_US
dc.rights2004 The American Ceramics Societyen_US
dc.subject.otherBinders/Bindingen_US
dc.subject.otherThermal Treatmenten_US
dc.subject.otherGrindingen_US
dc.subject.otherGreen Bodyen_US
dc.titleGreen Machining of a Thermoplastic Ceramic-Ethylene Ethyl Acrylate/Isobutyl Methacrylate Compounden_US
dc.typeArticleen_US
dc.rights.robotsIndexNoFollowen_US
dc.subject.hlbsecondlevelMaterials Science and Engineeringen_US
dc.subject.hlbtoplevelEngineeringen_US
dc.description.peerreviewedPeer Revieweden_US
dc.contributor.affiliationumMaterials Science and Engineering Department, University of Michigan, Ann Arbor, Michigan, 48109-2136en_US
dc.description.bitstreamurlhttp://deepblue.lib.umich.edu/bitstream/2027.42/65870/1/j.1551-2916.2004.01575.x.pdf
dc.identifier.doi10.1111/j.1551-2916.2004.01575.xen_US
dc.identifier.sourceJournal of the American Ceramic Societyen_US
dc.identifier.citedreferenceR. Hassold, “ CNC Machining as Rapid-Prototyping Technique,” Mod. Mach. Shop, 68 [ 5 ] 68 – 73 1995.en_US
dc.identifier.citedreferenceD. L. Halcomb and M. C. Rey, “ Ceramic Cutting Tools for Machining Unsintered Compacts of Oxide Ceramics,” Am. Ceram. Soc. Bull., 61, 1311 – 14 1982.en_US
dc.identifier.citedreferenceX. L. K. W. Wu and W. J. Mcanany, “ Acrylic Binder for Green Machining,” Am. Ceram. Soc. Bull., 74 [ 5 ] 61 – 64 1995.en_US
dc.identifier.citedreferenceJ. H. Song and J. R. G. Evans, “ On the Machinability of Ceramic Compacts,” J. Eur. Ceram. Soc., 17 [ 14 ] 1665 – 73 1997.en_US
dc.identifier.citedreferenceD. B. R. Kumar, M. R. Reddy, V. N. Mulay, and N. Krishnamurti, “ Acrylic Co-polymer Emulsion Binders for Green Machining of Ceramics,” Eur. Polym. J., 36 [ 7 ] 1503 – 10 2000.en_US
dc.identifier.citedreferenceW. L. Scheller II and W. Wanumuhama, “ Machining of Green Si 3 N 4 Polymer-Bonded Ceramic Materials,” Mater. Manuf. Processes, 11 [ 5 ] 775 – 87 1996.en_US
dc.identifier.citedreferenceT. Besshi, T. Sato, and T. I. Tsutsui, “ Machining of Alumina Green Bodies and Their Dewaxing,” J. Mater. Processes Technol., 95 [ 1–3 ] 133 – 38 ( 1999 ).en_US
dc.identifier.citedreferenceS. D. Nunn and G. H. Kirby, “ Green Machining of Gelcast Ceramic Materials,” Ceram. Eng. Sci. Proc., 17 [ 3 ] 209 – 13 1996.en_US
dc.identifier.citedreferenceM. D. Vlajic and V. D. Krstic, “ Strength and Machining of Gelcast SiC Ceramics,” J. Mater. Sci., 37 [ 14 ] 2943 – 47 2002.en_US
dc.identifier.citedreferenceM. Nishi and T. Sugita, “ Strength Reliability Evaluation of Ceramics with Machining,” J. Jpn. Soc. Powder Metall., 41 [ 11 ] 1405 – 11 1994.en_US
dc.identifier.citedreferenceE. Sentoku, H. Tanaka, and H. Kawabata, “ On the Machinability for Alumina-Molding Pieces (1st Part)—Cutting Conditions and Roughness of Finished Surface,” J. Jpn. Soc. Powder Powder Metall., 43 [ 4 ] 493 – 97 1996.en_US
dc.identifier.citedreferenceY. H. Koh, H. W. Kim, H. E. Kim, and J. W. Halloran, “ Fabrication and Compressive Strength of Macrochanneled Tetragonal-Zirconia Polycrystals with Calcium Phosphate Coating Layer,” J. Mater. Res., 18 [ 9 ] 2009 – 12 2003.en_US
dc.identifier.citedreferenceY. H. Koh, A. Knapp, J. W. Halloran, H. W. Kim, and H. E. Kim, “ Co-firing of Textured Dielectric Ca-Mg-Silicate and Bi-Ba-Nd-Titanate Composite,” J. Am. Ceram. Soc., in review.en_US
dc.identifier.citedreferenceL. A. Utracki, Polymer Alloys and Blends: Thermodynamics and Rheology ; pp. 29 – 30. Hanser, New York, 1989.en_US
dc.identifier.citedreferenceK. Q. Xiao and L. C. Zhang, “ The Role of Viscous Deformation in the Machining of Polymers,” Int. J. Mech. Sci., 44 [ 11 ] 2317 – 36 2002.en_US
dc.owningcollnameInterdisciplinary and Peer-Reviewed


Files in this item

Name:
j.1551-2916.2004.01575.x.pdf
Size:
572.6KB
Format:
PDF
View/Open

Show simple item record

Remediation of Harmful Language

The University of Michigan Library aims to describe library materials in a way that respects the people and communities who create, use, and are represented in our collections. Report harmful or offensive language in catalog records, finding aids, or elsewhere in our collections anonymously through our metadata feedback form. More information at Remediation of Harmful Language.

Accessibility

If you are unable to use this file in its current format, please select the Contact Us link and we can modify it to make it more accessible to you.