Now showing items 1-10 of 29
Effects of material properties and crush conditions on the crush energy absorption of fiber composite rods
(Elsevier, 1993)
Crushing along the fiber axis of undirectional E-glass fiber composites rods was examined to determine the effects of fiber volume fraction, fiber diameter, matrix compressive yield strength, crush rate, fiber surface ...
Effects of proton irradiation on the microstructure and microchemistry of type 304L stainless steel
(Elsevier, 1993-10)
A research program has been undertaken to determine the origins of irradiation-assisted stress corrosion cracking (IASCC) in austenitic alloys in light water reactors, and the effect of impurities on IASCC susceptibility. ...
The importance of constraint relief caused by rubber cavitation in the toughening of epoxy
(Kluwer Academic Publishers; Chapman & Hall ; Springer Science+Business Media, 1993-12)
Many rubber-toughened epoxies are thought to derive the bulk of their toughness through the processes of rubber cavitation and plastic shear-yielding in the epoxy matrix. Constraint relief has been considered to be a key ...
Fracture behavior of shear key structures with a softening process zone
(Kluwer Academic Publishers; Springer Science+Business Media, 1993-02)
The objective of this paper is to investigate the fracture behavior of short fiber reinforced ceramic structures by means of the fracture mechanics approach. In this paper, structural stability in relation to crack growth ...
Tensile Creep and Creep-Recovery Behavior of a SiC-Fiber Si 3 N 4 -Matrix Composite
(Blackwell Publishing Ltd, 1993-05)
Thickness dependence of higher-order Laue zone line positions at strongly dynamic zone axes
(Elsevier, 1993-01)
Simulation of bright-field convergent-beam electron diffraction (CBED) discs has revealed that, at zone axes where there are two strongly excited branches of the zero-layer dispersion surface that may interact with the ...
Irradiation assisted stress corrosion cracking of controlled purity 304L stainless steels
(Elsevier, 1993-06)
The effect of chromium, phosphorus, silicon and sulfur on the stress corrosion cracking of 304L stainless steel in CERT tests in high purity water or argon at 288[deg]C following irradiation with 3.4 MeV protons at 400[deg]C ...
Intercomparison of microchemical evolution under various types of particle irradiation
(Elsevier, 1993-10)
The problem of irradiation-assisted stress corrosion cracking (IASCC) in reactor cores is currently being addressed using different types of particle irradiation (electrons, heavy and light ions) to study the effect of ...
Fibrous Monolithic Ceramics: II, Flexural Strength and Fracture Behavior of the Silicon Carbide/Graphite System
(Blackwell Publishing Ltd, 1993-09)