Search Constraints
Number of results to display per page
View results as:
Search Results
-
- Creator:
- Elvati, Paolo, Luyet, Chloe, Wang, Yichun, Liu, Changjiang, VanEpps, J. Scott, Kotov, Nicholas A., and Violi, Angela
- Description:
- Amyloid nanofibers are abundant in microorganisms and are integral components of many biofilms, serving various purposes, from virulent to structural. Nonetheless, the precise characterization of bacterial amyloid nanofibers has been elusive, with incomplete and contradicting results. The present work focuses on the molecular details and characteristics of PSMa1-derived functional amyloids present in Staphylococcus aureus biofilms, using a combination of computational and experimental techniques, to develop a model that can aid the design of compounds to control amyloid formation. Results from molecular dynamics simulations, guided and supported by spectroscopy and microscopy, show that PSMa1 amyloid nanofibers present a helical structure formed by two protofilaments, have an average diameter of about 12 nm, and adopt a left-handed helicity with a periodicity of approximately 72 nm. The chirality of the self-assembled nanofibers, an intrinsic geometric property of its constituent peptides, is central to determining the fibers' lateral growth.
- Keyword:
- molecular self-assembly, computational nanotechnology, nanobiotechnology, and structural properties
- Citation to related publication:
- Paolo Elvati, Chloe Luyet, Yichun Wang, Changjiang Liu, J. Scott VanEpps, Nicholas A. Kotov, and Angela Violi ACS Applied Nano Materials 2023 6 (8), 6594-6604 DOI: 10.1021/acsanm.3c00174
- Discipline:
- Engineering and Science
-
- Creator:
- Lee, Sophie Y., Schönhöfer Philipp W.A., and Glotzer, Sharon C.
- Description:
- This dataset was generated for our work: "Complex motion of steerable vesicular robots filled with active colloidal rods". In this project, we used Brownian molecular dynamics simulations to study the rich dynamical behavior of rigid kinked vesicles that contain self-propelling rod-shaped particles. We identified that kinks in the vesicle membrane bias the emergent clustering and alignment of the active agents. Based on the system's geometrical and material properties, we were able to design multiple types of directed motion of the vesicle superstructure. This dataset includes simulation data for two-dimensional systems of self-propelling rod particles confined by teardrop-shaped coarse-grained vesicles. The trajectory of each simulation is saved in a GSD format file with parameter metadata in a JSON file. Due to the large number of replicas of each pair of parameters, simulation data were grouped into 5 different folders. Collective quantitative analysis for simulated trajectories was performed with Jupyter Notebook. and Workspaces_simulations.zip contains all the workspaces of simulations Each folder has subfolders called 'dimer' and 'trimer' depending on the length of the propelling rod particles used in the simulation. (Except for the folder 'number-density_16' which has only 'dimer') In the subfolders, we include the Python scripts used in this work for simulating and trajectory analysis for individual trajectory data. The parameter space of each folder is noted in init.py. Analysis_jupyter_notebooks.zip includes Jupyter notebooks that can reproduce the collective analysis done for this work.
- Discipline:
- Engineering
-
- Creator:
- Wallace, Dylan M, Benyamini, Miri, Nason-Tomaszewski, Samuel R, Costello, Joseph T, Cubillos, Luis H, Mender, Matthew J, Temmar, Hisham, Willsey, Matthew S, Patil, Parag P, Chestek, Cynthia A, and Zacksenhouse, Miriam
- Description:
- This is data from Wallace, Benyamini et al., 2023, Journal of Neural Engineering. There are two sets of data included: 1. Neural features and error labels used to train error classifiers for each day used in the study 2. Trial data from an example experiment day (Monkey N, Day 6), with runs for offline calibration, online brain control, error monitoring, and error correction. The purpose of this study was to investigate the use of error signals in motor cortex to improve brain-machine interface (BMI) performance for control of two finger groups. All data is contained in .mat files, which can be opened using MATLAB or the Python SciPy library.
- Keyword:
- Brain-machine interface (BMI), Error detection, and Neural recording
- Citation to related publication:
- Wallace, D. M., Benyamini, M., Nason-Tomaszewski, S. R., Costello, J. T., Cubillos, L. H., Mender, M. J., Temmar, H., Willsey, M. S., Patil, P. G., Chestek, C. A., & Zacksenhouse, M. (2023). Error detection and correction in intracortical brain–machine interfaces controlling two finger groups. Journal of Neural Engineering, 20(4), 046037. https://doi.org/10.1088/1741-2552/acef95
- Discipline:
- Engineering, Science, and Health Sciences
-
- Creator:
- Sun, Hu, Ren, Jiaen, Chen, Yang, Zou, Shasha, Chang, Yurui, Wang, Zihan, and Coster, Anthea
- Description:
- Our research focuses on providing a fully-imputed map of the worldwide total electron content with high resolution and spatial-temporal smoothness. We fill in the missing values of the original Madrigal TEC maps via estimating the latent feature of each latitude and local time along the 2-D grid and give initial guess of the missing regions based on pre-computed spherical harmonics map. The resulting TEC map has high imputation accuracy and the ease of reproducing. All data are in HDF5 format and are easy to read using the h5py package in Python. The TEC map is grouped in folders based on years and each file contains a single-day data of 5-min cadence. Each individual TEC map is of size 181*361. and WARNING: 2023-12-01 the data file for 2019-Jan-03 has badly fitted values. Please avoid using it. All other days' files are ready to use.
- Keyword:
- Total Electron Content, Matrix Completion, VISTA, Spherical Harmonics, and Spatial-Temporal Smoothing
- Citation to related publication:
- Sun, H., Hua, Z., Ren, J., Zou, S., Sun, Y., & Chen, Y. (2022). Matrix completion methods for the total electron content video reconstruction. The Annals of Applied Statistics, 16(3), 1333-1358., Sun, H., Chen, Y., Zou, S., Ren, J., Chang, Y., Wang, Z., & Coster, A. (2023). Complete Global Total Electron Content Map Dataset based on a Video Imputation Algorithm VISTA. Scientific Data, in press., and Zou, S., Ren, J., Wang, Z., Sun, H., & Chen, Y. (2021). Impact of storm-enhanced density (SED) on ion upflow fluxes during geomagnetic storm. Frontiers in Astronomy and Space Sciences, 8, 746429.
- Discipline:
- Science and Engineering
-
- Creator:
- Klinich, Kathleen D, Lin, Brian, and Moore, Jamie L.
- Description:
- This dataset allows comparison of the different strategies implemented by vehicle manufacturers being used to communicate with drivers. Spreadsheets were created in MS Excel to summarize data for each vehicle, and include page numbers in each vehicle owner's manual for reference. The photos taken of each vehicle control panel allow detailed inspection of the displays and controls.
- Keyword:
- vehicle, controls, displays, and FMVSS 101
- Discipline:
- Engineering
-
- Creator:
- Brian, Chen
- Description:
- The procedure followed while creating this data is summarized in Section II of Chen, Brian, et al. "Behavioral cloning in atari games using a combined variational autoencoder and predictor model." 2021 IEEE Congress on Evolutionary Computation (CEC). IEEE, 2021. This data is not a result of a research but an intermediate product that is used in research. This dataset is generated to train a behavioral cloning framework from gameplay screen captures and keystrokes of an "expert" player. The RL agent that is trained using "RL Baselines Zoo package" acts as the "expert" player, whose decision making process we desire to learn. In addition to behavioral cloning experiments, this dataset is further used to demonstrate the efficacy of a novel incremental tensor decomposition algorithm on image-based data streams.
- Keyword:
- Imitation Learning, Behavioral Cloning, Reinforcement Learning, Machine Learning, and Gameplay Data
- Citation to related publication:
- Chen, Brian, et al. "Behavioral cloning in atari games using a combined variational autoencoder and predictor model." 2021 IEEE Congress on Evolutionary Computation (CEC). IEEE, 2021., Aksoy, Doruk, et al. "An Incremental Tensor Train Decomposition Algorithm." arXiv preprint arXiv:2211.12487 (2022)., and Chen, Brian, et al. "Low-Rank Tensor-Network Encodings for Video-to-Action Behavioral Cloning", forthcoming
- Discipline:
- Engineering and Science
-
- Creator:
- Gill, Tate M, Sercel, Christopher L, and Jorns, Benjamin A
- Description:
- Rotating Magnetic Field (RMF) thrusters are a form of electrodeless plasma propulsion. This technology is a low maturity but potentially enabling candidate for high-power in-space propulsion for use with alternative propellants. The purpose of the data here, and the associated publication is to evaluate the phenomenological efficiency modes for this thruster test article to explain and understand its overall efficiency. These modes include divergence, power coupling, mass utilization, and plasma/acceleration efficiency. Additional time-resolved measurements of the internal plasma properties were performed using a triple Langmuir probe to evaluate energy loss processes within the thruster.
- Keyword:
- Electric Propulsion, Rotating Magnetic Field Thrusters, Inductive Pulsed Plasma Thrusters, and Magnetic Nozzles
- Citation to related publication:
- Gill, T.M., Sercel, C.L., and Jorns, B.A., "Experimental Investigation into Efficiency Loss in Rotating Magnetic Field Thrusters", Plasma Sci. Sources and Tech. 2023 (In Review)
- Discipline:
- Engineering
-
- Creator:
- Brenner, Austin M
- Description:
- Results of computer simulation of near Earth space is looked at in a new way to understand how energy moves around the global system. It is found that in addition to a pathway of energy from the outside into the system and back again there is an internal loop which recirculates energy. These new methods will greatly improve our understanding how the whole magnetosphere system evolves and will help address evolution of processes that have space weather impacts.
- Keyword:
- Energy flux, geospace, magnetopause, magnetosphere, poynting flux, and reconnection
- Citation to related publication:
- Austin Brenner, Tuija I. Pulkkinen, Qusai Al Shidi, et al. Dissecting Earth’s Magnetosphere: 3D Energy Transport in a Simulation of a Real Storm Event. ESS Open Archive . August 04, 2023.
- Discipline:
- Science and Engineering
-
- Creator:
- Towne, Aaron, Yeh, Chi-An., Patel, Het, and Taira, Kunihiko
- Description:
- This dataset contains data from a three-dimensional large eddy simulation of Mach 0.3 flow over a NACA 0012 airfoil at Reynolds number 23,000, which features a transitional boundary layer, separation over a recirculation bubble, and a turbulent wake. The dataset contains 16,000 time-resolved snapshots of the mid-span and spanwise-averaged velocity fields. All data are stored within hdf5 files, and a Matlab script showing how the data can be read and manipulated is provided. Please see the ‘airfoilLES_README.pdf’ file for more information. We recommend using the ‘airfoilLES_example.zip’ file as an entry point to the dataset. and The dataset is part of “A database for reduced-complexity modeling of fluid flows” (see references below) and is intended to aid in the conception, training, demonstration, evaluation, and comparison of reduced-complexity models for fluid mechanics. The paper introduces the flow setup and computational methods, describes the available data, and provides an example of how these data can be used for reduced-complexity modeling. Users of these data should cite the papers listed below.
- Citation to related publication:
- Towne, A., Dawson, S., Brès, G. A., Lozano-Durán, A., Saxton-Fox, T., Parthasarthy, A., Biler, H., Jones, A. R., Yeh, C.-A., Patel, H., Taira, K. (2022). A database for reduced-complexity modeling of fluid flows. AIAA Journal 61(7): 2867-2892. and Yeh, C.-A. and Taira, K. (2019) Resolvent-analysis-based design of airfoil separation control. Journal of Fluid Mechanics, 867:572–610.
- Discipline:
- Science and Engineering
-
- Creator:
- Towne, Aaron, Jones, Anya, and Biler, Hulya
- Description:
- This dataset contains experimental measurements of a flat-plate airfoil passing through a large-amplitude transverse gust. The dataset contains an ensemble of of the airfoil-gust encounter to account for variability in the gust profile, and each realization contains time-resolved force measurements and planar PIV velocity fields. All data are stored within hdf5 files, and a Matlab script showing how the data can be read and manipulated is provided. Please see the ‘airfoilEXP_README.pdf’ file for more information. We recommend using the ‘airfoilEXP_example.zip’ file as an entry point to the dataset. and The dataset is part of “A database for reduced-complexity modeling of fluid flows” (see references below) and is intended to aid in the conception, training, demonstration, evaluation, and comparison of reduced-complexity models for fluid mechanics. The paper introduces the flow setup and computational methods, describes the available data, and provides an example of how these data can be used for reduced-complexity modeling. Users of these data should cite the papers listed below.
- Keyword:
- fluid mechanics and aerodynamics
- Citation to related publication:
- Towne, A., Dawson, S., Brès, G. A., Lozano-Durán, A., Saxton-Fox, T., Parthasarthy, A., Biler, H., Jones, A. R., Yeh, C.-A., Patel, H., Taira, K. (2022). A database for reduced-complexity modeling of fluid flows. AIAA Journal 61(7): 2867-2892., Biler, H., Sedky, G., Jones, A. R., Saritas, M. and Cetiner, O. (2021) Experimental investigation of transverse and vortex gust encounters at low Reynolds numbers. AIAA Journal, 59(3):786–799., and Andreu-Angulo, I., Babinsky, H., Biler, H., Sedky, G. and Jones, A. R. (2020) Effect of transverse gust velocity profiles. AIAA Journal, 58(12):5123–5133.
- Discipline:
- Science and Engineering
-
- Creator:
- Towne, Aaron and Dawson, Scott
- Description:
- This dataset contains data from direct numerical simulations of two-dimensional stationary and pitching flat-plate airfoils at Reynolds number 100. The dataset contains time-resolved snapshots of the velocity field, lift and drag coefficients, and airfoil kinematics spanning 40-100 convective time units. Cases include a stationary airfoil and eight different pitching frequencies. All data are stored within hdf5 files, and a Matlab script showing how the data can be read and manipulated is provided. Please see the ‘airfoilDNS_README.pdf’ file for more information. We recommend using the ‘airfoilDNS_example.zip’ file as an entry point to the dataset. and The dataset is part of “A database for reduced-complexity modeling of fluid flows” (see references below) and is intended to aid in the conception, training, demonstration, evaluation, and comparison of reduced-complexity models for fluid mechanics. The paper introduces the flow setup and computational methods, describes the available data, and provides an example of how these data can be used for reduced-complexity modeling. Users of these data should cite the papers listed below.
- Keyword:
- fluid mechanics and aerodynamics
- Citation to related publication:
- Towne, A., Dawson, S., Brès, G. A., Lozano-Durán, A., Saxton-Fox, T., Parthasarthy, A., Biler, H., Jones, A. R., Yeh, C.-A., Patel, H., Taira, K. (2022). A database for reduced-complexity modeling of fluid flows. AIAA Journal 61(7): 2867-2892. and Dawson, S. T. M., Floryan, D. C., Rowley, C. W., and Hemati, M. S. (2016) Lift enhancement of high angle of attack airfoils using periodic pitching. AIAA Paper 2016-2069.
- Discipline:
- Engineering and Science
-
- Creator:
- Towne, Aaron S. and Lozano-Durán, Adrián
- Description:
- This dataset contains data from two direct numerical simulations of a turbulent zero-pressure-gradient flat-plate boundary layer spanning friction Reynolds numbers from 292 to 728 (BL1) and 488 to 1024 (BL2). The dataset contains time-resolved snapshots of the three-dimensional velocity field for both cases: roughly 10,000 snapshots spanning 20 eddy-turnover times for BL1 and 7,500 snapshots spanning 7 eddy-turnover times for BL2 . Also included for both cases are pre-processed correlations at several wall-normal distances, mean and root-mean-squared velocity and vorticity profiles, several boundary-layer metrics, and time-resolved velocity data in the streamwise-wall-normal plane. All data are stored within hdf5 files, and a Matlab script showing how the data can be read and manipulated is provided. Please see the ‘BLdns_README.pdf’ file for more information. We recommend using the ‘BLdns_example.zip’ file as an entry point to the dataset. and The dataset is part of “A database for reduced-complexity modeling of fluid flows” (see references below) and is intended to aid in the conception, training, demonstration, evaluation, and comparison of reduced-complexity models for fluid mechanics. The paper introduces the flow setup and computational methods, describes the available data, and provides an example of how these data can be used for reduced-complexity modeling. Users of these data should cite the paper listed below.
- Keyword:
- fluid mechanics, boundary layer, and turbulence
- Citation to related publication:
- Towne, A., Dawson, S., Brès, G. A., Lozano-Durán, A., Saxton-Fox, T., Parthasarthy, A., Biler, H., Jones, A. R., Yeh, C.-A., Patel, H., Taira, K. (2022). A database for reduced-complexity modeling of fluid flows. AIAA Journal 61(7): 2867-2892.
- Discipline:
- Engineering and Science
-
- Creator:
- Towne, Aaron, Saxton-Fox, Theresa, and Parthasarthy, Aadhy
- Description:
- This dataset contains experimental measurements of a zero-pressure-gradient flat-plate boundary layer at five different Reynolds numbers collected using particle image velocimetry. For each Reynolds number, the dataset contains approximately 6000 snapshots of planar velocity fields as well as raw particle image pairs. All data are stored within hdf5 files, and a Matlab script showing how the data can be read and manipulated is provided. Please see the ‘BLexp_README.pdf’ file for more information. We recommend using the ‘BLexp_example.zip’ file as an entry point to the dataset. and The dataset is part of “A database for reduced-complexity modeling of fluid flows” (see references below) and is intended to aid in the conception, training, demonstration, evaluation, and comparison of reduced-complexity models for fluid mechanics. The paper introduces the flow setup and computational methods, describes the available data, and provides an example of how these data can be used for reduced-complexity modeling. Users of these data should cite the papers listed below.
- Keyword:
- fluid mechanics
- Citation to related publication:
- Towne, A., Dawson, S., Brès, G. A., Lozano-Durán, A., Saxton-Fox, T., Parthasarthy, A., Biler, H., Jones, A. R., Yeh, C.-A., Patel, H., Taira, K. (2022). A database for reduced-complexity modeling of fluid flows. AIAA Journal 61(7): 2867-2892.
- Discipline:
- Engineering and Science
-
- Creator:
- Towne, Aaron S. and Brès, Guillaume
- Description:
- This dataset contains data from a large eddy simulation of a turbulent jet at Mach number 0.9. The dataset contains 10000 time-resolved snapshots of three-dimensional velocity, density, and pressure fields spanning 2000 acoustic time units and also includes pre-processed azimuthal Fourier modes for each snapshot and the mean flow. All data are stored within hdf5 files, and a Matlab script showing how the data can be read and manipulated is provided. Please see the ‘jet_README.pdf’ file for more information. We recommend using the ‘jet_example.zip’ file as an entry point to the dataset. and The dataset is part of “A database for reduced-complexity modeling of fluid flows” (see references below) and is intended to aid in the conception, training, demonstration, evaluation, and comparison of reduced-complexity models for fluid mechanics. The paper introduces the flow setup and computational methods, describes the available data, and provides two examples of how these data can be used for reduced-complexity modeling. Users of these data should cite the two papers listed below.
- Keyword:
- fluid mechanics, jets, and turbulence
- Citation to related publication:
- Towne, A., Dawson, S., Brès, G. A., Lozano-Durán, A., Saxton-Fox, T., Parthasarthy, A., Biler, H., Jones, A. R., Yeh, C.-A., Patel, H., Taira, K. (2022). A database for reduced-complexity modeling of fluid flows. AIAA Journal 61(7): 2867-2892. and Brès, G. A., Jordan, P., Jaunet, V., Le Rallic, M., Cavalieri, A. V. G., Towne, A., Lele, S. K., Colonius, T., Schmidt, O. T. (2018) Importance of the nozzle-exit boundary-layer state in subsonic turbulent jets. J. Fluid Mech., 851:83–124.
- Discipline:
- Engineering and Science
-
- Creator:
- Burgin, Tucker and Mayes, Heather B.
- Description:
- This project aimed to discover and analyze the molecular mechanism of synthesis of two particular fucosylated oligosaccharide products in a mutant enzyme, Thermatoga maratima Alpha-L-Fucosidase D224G, whose wild type performs the opposite reaction (cleavage of fucosyl glycosidic bonds). Discovery of the mechanism was performed using an unbiased simulations method known as aimless shooting, whereas analysis of the mechanism in terms of the energy profile was performed using a separate method known as equilibrium path sampling. The data here concerns the latter method. and The contents of the atesa_master.zip are the ATESA GitHub project. A Python program for automating transition path sampling with aimless shooting using Amber. https://github.com/team-mayes/atesa
- Keyword:
- Equilibrium Path Sampling, Transition Path Sampling, Enzymatic Mechanism, and GH29
- Citation to related publication:
- Burgin, T., & Mayes, H. B. (2019). Mechanism of oligosaccharide synthesis via a mutant GH29 fucosidase. Reaction Chemistry & Engineering, 4(2), 402–409. https://doi.org/10.1039/C8RE00240A
- Discipline:
- Engineering
-
- Creator:
- Ruas, Terry, Ferreira, Charles H. P., Grosky, William, França, Fabrício O., and Medeiros, Débora M. R,
- Description:
- The relationship between words in a sentence often tell us more about the underlying semantic content of a document than its actual words, individually. Recent publications in the natural language processing arena, more specifically using word embeddings, try to incorporate semantic aspects into their word vector representation by considering the context of words and how they are distributed in a document collection. In this work, we propose two novel algorithms, called Flexible Lexical Chain II and Fixed Lexical Chain II that combine the semantic relations derived from lexical chains, prior knowledge from lexical databases, and the robustness of the distributional hypothesis in word embeddings into a single decoupled system. In short, our approach has three main contributions: (i) unsupervised techniques that fully integrate word embeddings and lexical chains; (ii) a more solid semantic representation that considers the latent relation between words in a document; and (iii) lightweight word embeddings models that can be extended to any natural language task. Knowledge-based systems that use natural language text can benefit from our approach to mitigate ambiguous semantic representations provided by traditional statistical approaches. The proposed techniques are tested against seven word embeddings algorithms using five different machine learning classifiers over six scenarios in the document classification task. Our results show that the integration between lexical chains and word embeddings representations sustain state-of-the-art results, even against more complex systems. Github: https://github.com/truas/LexicalChain_Builder
- Keyword:
- document classification, lexical chains, word embeddings, synset embeddings, chain2vec, and natural language processing
- Citation to related publication:
- Terry Ruas, Charles Henrique Porto Ferreira, William Grosky, Fabrício Olivetti de França, Débora Maria Rossi de Medeiros, "Enhanced word embeddings using multi-semantic representation through lexical chains", Information Sciences, 2020, https://doi.org/10.1016/j.ins.2020.04.048
- Discipline:
- Other, Science, and Engineering
-
- Creator:
- Towne, Aaron
- Description:
- This database contains six datasets intended to aid in the conception, training, demonstration, evaluation, and comparison of reduced-complexity models for fluid mechanics. The six datasets are: large-eddy-simulation data for a turbulent jet, direct-numerical-simulation data for a zero-pressure-gradient turbulent boundary layer, particle-image-velocimetry data for the same boundary layer, direct-numerical-simulation data for laminar stationary and pitching flat-plate airfoils, particle-image-velocimetry and force data for an airfoil encountering a gust, and large-eddy-simulation data for the separated, turbulent flow over an airfoil. All data are stored within hdf5 files, and each dataset additionally contains a README file and a Matlab script showing how the data can be read and manipulated. Since all datafiles use the hdf5 format, they can alternatively be read within virtually any other programing environment. An example.zip file included for each dataset provides an entry point for users. The database is an initiative of the AIAA Discussion Group on Reduced-Complexity Modeling and is detailed in the paper listed below. For each dataset, the paper introduces the flow setup and computational or experimental methods, describes the available data, and provide an example of how these data can be used for reduced-complexity modeling. All users should cite this paper as well as appropriate primary sources contained therein. Towne, A., Dawson, S., Brès, G. A., Lozano-Durán, A., Saxton-Fox, T., Parthasarthy, A., Biler, H., Jones, A. R., Yeh, C.-A., Patel, H., Taira, K. (2022). A database for reduced-complexity modeling of fluid flows. AIAA Journal 61(7): 2867-2892.
- Keyword:
- fluid dynamics, reduced-complexity models, and data-driven models
- Discipline:
- Engineering and Science
6Works -
- Creator:
- Chaoran Xu, Davlasheridze, Meri, Nelson-Mercer, Benjamin T., Bricker, Jeremy D., Jia, Jianjun, and Ross, Ashley D.
- Description:
- Hurricane Ike, which struck the United States in September 2008, was the ninth most expensive hurricane in terms of damages. It caused nearly $30 billion in damage, of which nearly $12B were insured losses, after making landfall on the Bolivar Peninsula, Texas. We used the Delft3d-FM/SWAN hydrodynamic and spectral wave model to simulate the storm surge inundation around Galveston Bay during Hurricane Ike. Damage curves were established through the eight hydrodynamic parameters (water depth, flow velocity, unit discharge, flow momentum flux, significant wave height, wave energy flux, total water depth (flow depth plus wave height), and total (flow plus wave) force) simulated by the model. We found that the damage curves are sensitive to the model grid resolution, building elevation, and the number of stories.
- Citation to related publication:
- Xu et al. (2023). Damage curves derived from Hurricane Ike in the west of Galveston Bay based on insurance claims and hydrodynamic simulations.
- Discipline:
- Engineering
-
- Creator:
- Mohtat, Peyman, Siegel, Jason B., and Stefanopoulou, Anna G.
- Description:
- The goal here is to study the voltage and expansion response of lithium-ion batteries at different charging rates. Specifically, the goal is to capture the observation of the smoothing of the peaks in dV/dQ and retention of the peaks in d^2 (backslash)delta/dQ^2 at higher C-rates. The retention of the peaks at higher charging rates enables better estimation of the cell capacity. To achieve this goal a reduced order electrochemical and mechanical model with multiple particles with a size distribution is developed. This allows us to capture the smoothing and preservation of the phase transitions in the voltage and expansion measurements at high C-rates, respectively. The model is written in Matlab software.
- Keyword:
- Lithium-ion batteries, Modeling, Multiparticle, Mechanical response, and Electrochemical
- Citation to related publication:
- Mohtat, P., Lee, S., Sulzer, V., Siegel, J. B., & Stefanopoulou, A. G. (2020). Differential Expansion and Voltage Model for Li-ion Batteries at Practical Charging Rates. Journal of The Electrochemical Society, 167(11), 110561. https://doi.org/10.1149/1945-7111/aba5d1
- Discipline:
- Engineering
-
- Creator:
- Ponder, Brandon M., Ridley, Aaron J., Goel, Ankit, and Bernstein, Dennis S.
- Description:
- This research was completed to statistically validate that a data-model refinement technique could integrate real measurements to remove bias from physics-based models via changing the forcing parameters such as the thermal conductivity coefficients.
- Keyword:
- Thermosphere, GITM, CHAMP, GRACE, MSIS, Upper Atmosphere Modeling, and Data Assimilation
- Citation to related publication:
- Ponder, B. M., Ridley, A. J., Goel, A., & Bernstein, D. S. (2023). Improving forecasting ability of GITM using data-driven model refinement. Space Weather, 21, e2022SW003290. https://doi.org/10.1029/2022SW003290
- Discipline:
- Engineering and Science