Now showing items 501-510 of 521
A discussion of the molecular mechanisms of moisture transport in epoxy resins
(John Wiley & Sons, Inc., 2000-03-01)
A typical epoxy formulation can absorb several weight percent of water, seriously degrading the physical properties of the resin. In two preceding publications (Soles, C. L.; Chang, F. T.; Bolan, B. A.; Hristov, H. A.; ...
Investigation of the Physical and Mechanical Properties of Hot-Pressed Boron Nitride/Oxide Ceramic Composites
(American Ceramics SocietyBlackwell Publishing Ltd, 1999-09)
Effect of ion bombardment on in-plane texture, surface morphology, and microstructure of vapor deposited Nb thin films
(The American Institute of Physics, 1997-05-15)
Niobium films were deposited by physical vapor deposition (PVD) and ion-beam-assisted deposition (IBAD) using ion energies of 0, 250, 500 and 1000 eV, and RR ratios (ion-to-atom arrival rate ratio) of 0, 0.1, and 0.4 on ...
A new approach for estimating the recrystallization rate and equilibrium melting temperature
(John Wiley & Sons, Inc., 1998-01-15)
A method is described for measuring the heat and rate of recrystallization following partial melting. The method uses a specific sequence of temperatures with a differential scanning calorimeter, and the melting and ...
Fabrication of in situ TiC reinforced aluminum matrix composites
(Kluwer Academic Publishers; Springer Science+Business Media, 2001-08)
In the present work, the room and elevated temperature mechanical behavior of Al/TiC, high-strength Al-Si/TiC and the elevated temperature-resistant Al-Fe(-V-Si)/TiC composites has been evaluated. The microstructural ...
Fluorene-Based Oligomers for Highly Efficient and Stable Organic Blue-Light-Emitting Diodes
(WILEY-VCH Verlag, 2009-06-19)
No Abstract.
Deformation and fracture of adhesive layers constrained by plastically-deforming adherends
(Brill Academic Publishers; VSP BV 2000 ; Springer Science+Business Media, 2000-11)
The use of an embedded-process zone (EPZ) model to investigate the mode I cohesive parameters for plastically-deforming, adhesively-bonded joints is demonstrated in this paper. It is shown that for the particular systems ...