Search Constraints
« Previous |
1 - 20 of 79
|
Next »
Number of results to display per page
View results as:
Search Results
-
TCC Engine Collection
User Collection
- Creator:
- Schiffmann, Philipp, Reuss, David L, and Sick, Volker
- Description:
- This Collection is a compilation of data measured in the TCC engine at the University of Michigan, Department of Mechanical Engineering, Quantitative Laser Diagnostics Laboratory. The posted Work Deposits are never changed. However, this collection will be expanded with additional Work Deposits as new experimental data become available. The intent of the collection is to provide a comprehensive experimental data set from the TCC-III engine, for fundamental discovery research on in-cylinder flow and spark-ignited combustion. Also, to enable in-depth support for CFD development and validation. The collection includes data files of in-cylinder flowvelocity and flame imaging, as well as engine and system geometry needed to set up 1-D and CFD simulations. and README for TCCIII_Collection: https://umich.box.com/v/Collection-README-rev20180202
- Keyword:
- internal combustion engine, TCC III engine, optical engine, CFD validation data, motored engine, turbulence in engines, cyclic variability, laser imaging data, particle image velocimetry, PIV, in-cylinder flow, and OH chemiluminescence
- Citation to related publication:
- http://dx.doi.org/10.2516/ogst/2015028 and http://dx.doi.org/10.1177/1468087417720558
4Works -
R/V Melville Core Retrieval Campaign (MV0811), November 2008
User Collection
- Creator:
- Wang, Yi and Hendy, Ingrid
- Description:
- This collection represents various raw data and analysis of cores extracted during the November 2008 mission of R/V Melville in the Santa Barbara Basin., The core included is the jumbo piston core MV0811-14JC. Core photos, physical properties and magnetic susceptibility from the multisensor track (MST), and the scanning X-ray fluorescence (XRF) data are included in the collection., and Cruise DOI: 10.7284/903459 The research is funded by NSF OCE-1304327.
- Keyword:
- Santa Barbara Basin, Southern California, core photos, physical properties, scanning XRF, MV0811, and Earth Science
- Discipline:
- Science
3Works -
Estimates of the water balance of the Laurentian Great Lakes using the Large Lakes Statistical Water Balance Model (L2SWBM)
User Collection
- Creator:
- Smith, Joeseph P., Fry, Lauren M., Do, Hong X., and Gronewold, Andrew D.
- Description:
- This collection contains estimates of the water balance of the Laurentian Great Lakes that were produced by the Large Lakes Statistical Water Balance Model (L2SWBM). Each data set has a different configuration and was used as the supplementary for a published peer-reviewed article (see "Citations to related material" section in the metadata of individual data sets). The key variables that were estimated by the L2SWBM are (1) over-lake precipitation, (2) over-lake evaporation, (3) lateral runoff, (4) connecting-channel outflows, (5) diversions, and (6) predictive changes in lake storage. and Contact: Andrew Gronewold Office: 4040 Dana Phone: (734) 764-6286 Email: drewgron@umich.edu
- Keyword:
- Great Lakes water levels, statistical inference, water balance, data assimilation, Great Lakes, Laurentian, Machine learning, Bayesian, and Network
- Citation to related publication:
- Smith, J. P., & Gronewold, A. D. (2017). Development and analysis of a Bayesian water balance model for large lake systems. arXiv preprint arXiv:1710.10161., Gronewold, A. D., Smith, J. P., Read, L., & Crooks, J. L. (2020). Reconciling the water balance of large lake systems. Advances in Water Resources, 103505., and Do, H.X., Smith, J., Fry, L.M., and Gronewold, A.D., Seventy-year long record of monthly water balance estimates for Earth’s largest lake system (under revision)
- Discipline:
- Science and Engineering
5Works -
- Creator:
- Wang, Yi and Hendy, Ingrid
- Description:
- This collection represents various raw data and analysis of cores extracted during the January 2009 mission of the research vessel Sproul in the Santa Barbara Basin., Cores included: box core SPR0901-04BC, box core SPR0901-unnamed, and Kasten core SPR0901-03KC. Core photos, physical properties and magnetic susceptibility from the multisensor track (MST), and the scanning X-ray fluorescence (XRF) data are included in the collection., and Cruise DOI: 10.7284/901089 This research is funded by NSF-OCE 0752093.
- Keyword:
- Santa Barbara Basin, Southern California, core photos, physical properties, scanning XRF, SPR0901, and Earth Science
- Discipline:
- Science
8Works -
S’Urachi Site-Based Archaeological Survey
User Collection
- Creator:
- Gosner, Linda R.
- Description:
- This data was produced by the site-based archaeological survey at the nuraghe S'Urachi in west-central Sardinia (San Vero Milis, Oristano, Sardinia). The survey was carried out from 2015-2017 as a part of the ongoing Progetto S'Urachi, an archaeological project that aims to understand daily life around the monumental Bronze Age tower of S'Urachi during the later occupation of the landscape over the course of the 1st millennium BCE.
- Keyword:
- Mediterranean archaeology, Sardinia, Archaeological Survey, Excavation, and Classical Archaeology
- Discipline:
- Social Sciences
2Works -
- Creator:
- Huang, Cheng MI
- Description:
- This collection contains a hierarchy of test problems for turbulent reacting flow simulations. It is meant to provide a testbed to build reduced model for relevant challenging reacting flow problems using different methods. In addition, this collection also serves to engage a broad community of experts in computational science and the field of engineering to address certain challenges in constructing reduced models for reacting flow simulations. All the datasets in this collection were generated under the Air Force Center of Excellence on Multi-Fidelity Modeling of Rocket Combustion Dynamics and the goal of the center is to advance the state-of-the-art in Reduced Order Models (ROMs) and enable efficient and accurate prediction of instabilities in liquid fueled rocket combustion systems.
- Discipline:
- Engineering
2Works -
Defect patterns on the curved surface of fish retinae suggest a mechanism of cone mosaic formation
User Collection
- Creator:
- Nunley, Hayden, Nagashima, Mikiko, Martin, Kamirah, Lorenzo Gonzalez, Alcides, Suzuki, Sachihiro C., Norton, Declan A., Wong, Rachel O. L., Raymond, Pamela A., and Lubensky, David K.
- Description:
- The outer epithelial layer of zebrafish retinae contains a crystalline array of cone photoreceptors, called the cone mosaic. As this mosaic grows by mitotic addition of new photoreceptors at the rim of the hemispheric retina, topological defects, called “Y-Junctions”, form to maintain approximately constant cell spacing. The generation of topological defects due to growth on a curved surface is a distinct feature of the cone mosaic not seen in other well-studied biological patterns like the R8 photoreceptor array in the _ Drosophila compound eye. Since defects can provide insight into cell-cell interactions responsible for pattern formation, here we characterize the arrangement of cones in individual Y-Junction cores (see Set of images for Figures 1 and 2 and 6 and Supplementary Figure 7) as well as the spatial distribution of Y-junctions across entire retinae (see Dataset for analyzing spatial distribution of Y-junctions in flat-mounted retinae). We find that for individual Y-junctions, the distribution of cones near the core corresponds closely to structures observed in physical crystals (see Set of images for Figures 1 and 2 and 6 and Supplementary Figure 7). In addition, Y-Junctions are organized into lines, called grain boundaries, from the retinal center to the periphery (see Dataset for analyzing spatial distribution of Y-junctions in flat-mounted retinae and Dataset for measuring tendency of Y-junctions to line up into grain boundaries during incorporation into retinae). In physical crystals, regardless of the initial distribution of defects, defects can coalesce into grain boundaries via the mobility of individual particles. By imaging in live fish, we demonstrate that grain boundaries in the cone mosaic instead appear during initial mosaic formation, without requiring defect motion (see Dataset for measuring tendency of Y-junctions to line up into grain boundaries during incorporation into retinae and Dataset for analyzing Y-junction motion in live fish retinae). Motivated by this observation, we show that a computational model of repulsive cell-cell interactions generates a mosaic with grain boundaries (see Code and example simulations of phase-field crystal model (for cone mosaic formation)). In contrast to paradigmatic models of fate specification in mostly motionless cell packings (see Code and accompanying input data for simulating lateral inhibition on motionless cell packing), this finding emphasizes the role of cell motion, guided by cell-cell interactions during differentiation, in forming biological crystals. Such a route to the formation of regular patterns may be especially valuable in situations, like growth on a curved surface, where the resulting long-ranged, elastic, effective interactions between defects can help to group them into grain boundaries.
- Keyword:
- zebrafish cone mosaic, lattice vectors, topological defects, tissue patterning, grain boundaries, lateral inhibition, photoconversion, phase-field crystal model, and defect motion
- Discipline:
- Science
7Works -
Lu-177 DOTATATE Anonymized Patient Datasets
User Collection
- Creator:
- Dewaraja, Yuni K and Van, Benjamin J
- Description:
- This collection is comprised of a number of works that collectively represent the imaging studies and information necessary for dosimetric analysis of a patient treated with Lutathera. All works may be used as standalone datasets or in conjunction with the others in this collection depending on the analysis performed. Files are stored using the DICOM standard widely accepted for storage and transmission of medical images and related information. All patient private information has been anonymized using MIM commercial software (MIM Software Inc.). Data from 2 patients, referred to as patient 4 and patient 6, has been provided in this collection and is divided among 6 works as outlined below:, 1) Pre-Therapy Diagnostic Images. Description: Patient diagnostic scans performed prior to Lutathera treatment. Used for identifying lesions and measuring progression. Note that the date of the baseline scan may be several months before the Lutathera treatment and changes in the anatomy are possible. Files: (1) Ga68 Dotatate PET/CT, Either: (1) MRI, (1) standalone diagnostic CT, 2) Planar Whole Body Scans. Description: Planar whole body Lu-177 scans taken at 4 time points within a week after treatment. Two views (Anterior and Posterior) and 3 energy windows (one main window at 208 keV and 2 adjacent scatter windows) are available for each time point. The units of this image is counts. Energy window information, acquisition data/time and duration can be found in DICOM header. Files: (6) individual images at each time point (24 total images per patient) , 3) SPECT/CT Scans. Description: Lu-177 SPECT/CT scans at 4 time points within a week after treatment (same time points as the planar scans). Images were acquired on a Siemens Intevo system and reconstructed using xSPECT Quant. The units of this image is Bq/mL. Information on the reconstruction, acquisition date/time, duration, Lu-177 administration time and activity can be found in the DICOM header. Files: (1) Folder with reconstructed SPECT slices per time point (4 folders total per patient), (1) Folder containing co-registered CT slices per time point (4 folders total per patient), 4) Lesion and Organ Volumes of Interest. Description: DICOM RT structure files containing organ and lesion volumes of interest (VOI) that were defined on the CT of the scan1 SPECT/CT in 3). Organs were defined using semi-automatic tools (atlas based and CNN-based) while lesions were defined manually by a radiologist guided by baseline scans. Only lesions >2 cc were defined. Files: (1) File containing organ contours, (1) File containing lesion contours, 5) Time Integrated Activity Maps. Description: A DICOM file containing the time-integrated activity map over all 4 time points within a week after treatment. This combines the SPECT/CT scans provided in 3) into a single integrated activity map. This map was generated via the MIM MRT Dosimetry package: The 4 time points were registered to the reference SPECT scan (time point 1) using a contour intensity based SPECT alignment and the voxel-level time-activity data was fit using exponential functions. Voxel-level integration was performed to generate the TIA map. The units of this image is Bq/mL * sec. Files: (1) Folder with Time-integrated activity image per patient, and 6) Projection Data and CT based Attenuation Coefficient Maps. Description: SPECT projection data for each of the 4 Lutathera scans taken within a week after treatment is provided in 3 forms: unaltered, Siemens [Reformatted], and Siemens [Advanced]. The difference between the Projections and the [Advanced] Projections is that the [Advanced] consists of uncorrected raw projection data and the other the corrected projection data (e.g. camera uniformity corrections). The [Advanced] projections are used in xSPECT reconstruction (where all corrections are done during the reconstruction), while the other is used in Flash 3D reconstruction. CT-based attenuation coefficient maps (mumaps) are provided for each of the 4 scans taken within a week after treatment. Two methods are provided for each mumap: xSPECT and F3D as the matrix size is different for the 2 cases (256 x 256 for xSPECT and 128 x 128 for Flash3D). Files: (3) Folders containing raw SPECT projections, (2) Folders containing CT attenuation coefficient maps (mumaps)
- Keyword:
- Lu-177, Lutathera, Dosimetry, Radionuclide, and CTMRIPET
- Discipline:
- Health Sciences
6Works -
- Creator:
- Figueroa, Carlos A., Computational Vascular Biomechanics Lab, University of Michigan, and et al.
- Description:
- This collection concerns the CRIMSON (CardiovasculaR Integrated Modelling and SimulatiON) software environment. CRIMSON provides a powerful, customizable and user-friendly system for performing three-dimensional and reduced-order computational haemodynamics studies via a pipeline which involves: 1) segmenting vascular structures from medical images; 2) constructing analytic arterial and venous geometric models; 3) performing finite element mesh generation; 4) designing, and 5) applying boundary conditions; 6) running incompressible Navier-Stokes simulations of blood flow with fluid-structure interaction capabilities; and 7) post-processing and visualizing the results, including velocity, pressure and wall shear stress fields. , The minimum specifications to run CRIMSON are: Any AMD64 CPU (note: Intel Core i series are AMD64), Windows (only tested on Windows 10 but might work on Windows 7), 8 GB of RAM , If you are running non-trivial models you will want to have: Quad core CPU or higher, Solid state drive for storing data, Windows, 16 GB of RAM, Dedicated discrete GPU for rendering models. , and Software in this collection is a snapshot; please visit https://github.com/carthurs/CRIMSONGUI & www.crimson.software for more general information and the most up to date version of the software.
- Keyword:
- Blood Flow Simulation, Patient-specific, Open-source Software, Image-based simulation, Cardiovascular Medical Image, Segmentation, and Finite Element Simulation
- Citation to related publication:
- CRIMSON: An Open-Source Software Framework for Cardiovascular Integrated Modelling and Simulation C.J. Arthurs, R. Khlebnikov, A. Melville, et al. bioRxiv 2020.10.14.339960; doi: https://doi.org/10.1101/2020.10.14.339960
- Discipline:
- Health Sciences and Engineering
4Works -
Biologically Inspired Robotics and Dynamical Systems (BIRDS) Lab
User Collection
- Creator:
- Revzen, Shai
- Description:
- Professor Revzen and his team at the Biologically Inspired Robotics and Dynamical Systems (BIRDS) Lab are working on discovering, modeling, and reproducing the strategies animals use when interacting with physical objects. This work consists of collaboration with biomechanists to analyze experimental data, developing new mathematical tools for modeling and estimation of model parameters, and construction of robots which employ the new principles.
- Discipline:
- Science
7Works -
- Creator:
- MacEachern, Mark
- Description:
- This collection contains literature searches for published evidence syntheses in the health sciences.
- Keyword:
- health sciences, evidence syntheses, systematic reviews, scoping reviews, and literature searches
- Discipline:
- Health Sciences
20Works -
- Creator:
- Hatch, Nan E.
- Description:
- Craniosynostosis is the premature fusion of cranial bones. The goal of this study was to determine if delivery of recombinant tissue nonspecific alkaline phosphatase (TNAP) could prevent or diminish the severity of craniosynostosis in a C57BL/6 FGFR2C342Y/+ model of neonatal onset craniosynostosis or a BALB/c FGFR2C342Y/+ model of postnatal onset craniosynostosis. Mice were injected with a lentivirus encoding a mineral targeted form of TNAP immediately after birth. Cranial bone fusion as well as cranial bone volume, mineral content and density were assessed by micro computed tomography. Craniofacial shape was measured with calipers., Alkaline phosphatase, alanine amino transferase (ALT) and aspartate amino transferase (AST) activity levels were measured in serum. Neonatal delivery of TNAP diminished craniosynostosis severity from 94% suture obliteration in vehicle treated mice to 67% suture obliteration in treated mice, p<0.02) and the incidence of malocclusion from 82.4% to 34.7% (p<0.03), with no effect on cranial bone in C57BL/6 FGFR2C342Y/+ mice. In contrast, treatment with TNAP improved cranial bone volume (p< 0.01), density (p< 0.01) and mineral content (p< 0.01) but had no effect on craniosynostosis or malocclusion in BALB/c FGFR2C342Y/+ mice. , These results indicate that post-natal recombinant TNAP enzyme therapy diminishes craniosynostosis severity in the C57BL/6 FGFR2C342Y/+ neonatal onset mouse model of Crouzon syndrome, and that effects of exogenous TNAP are genetic background dependent., and Included in this collection is one set of images representing the C57BL/6 FGFR2C342Y/+ model of neonatal onset craniosynostosis, and one for the BALB/c FGFR2C342Y/+ model of postnatal onset craniosynostosis
- Keyword:
- craniofacial, bone, craniosynostosis, FGFR2, TNAP, mouse model, and development
- Discipline:
- Health Sciences
2Works -
- Creator:
- Sun, Xin, Zhang, Kehui, Marks, Rebecca, Karas, Zachary, Eggleston, Rachel, Nickerson, Nia , Yu, Chi-Lin, Wagley, Neelima, Hu, Xiaosu, Caruso, Valeria, Tardif, Twila, Satterfield, Teresa, Chou, Tai-Li, Kovelman, Ioulia, and Hernandez, Isabel
- Description:
- In a broad sense, this project explores morphological and phonological processing in English monolinguals and two bilingual populations, Chinese-English and Spanish-English, using a battery of standardized and self-developed behavioral measures, as well as fNIRS neuroimaging. (T1=NEW PARTICIPANTES -TESTED BEHAVIORAL AND fNIRS-, T2= RETURNING PARTICIPANTS -JUST TESTED WITH BEHAVIORAL ASSESSMENTS)
- Discipline:
- Science
2Works -
Bangime language (Mali) audio files
User Collection
- Creator:
- Heath, Jeffrey
- Description:
- Audio files for Bangime language (genetic isolate, eastern Mali)
5Works -
Appendices for "Regulation of Müller Stem Cell Properties: Insights From a Zebrafish Model"
User Collection
- Creator:
- Sifuentes, Christopher J
- Description:
- Appendix1: Differential expression data for zebrafish regeneration and mouse degeneration models. Appendix2: Gene ontology data for zebrafish regeneration and mouse degeneration models. Appendix3: Pathway data for zebrafish regeneration and mouse degeneration models. Appendix4: Differential expression data and genes within linked peaks for mi2004 mutants. Appendix5: Gene ontology data for mi2004 mutants. Appendix6: Pathway data for mi2004 mutants. Appendix7: Linkage plots for mi2004 mutants. Appendix8: Inverse PCR and genome-walking data.
- Keyword:
- Müller glia, zebrafish, regeneration, stem cell, and photoreceptor
- Citation to related publication:
- Sifuentes, C. J. (2016). Regulation of Müller glial stem cell properties: Insights from a zebrafish model (Doctoral dissertation). Retrieved from http://hdl.handle.net/2027.42/135939
8Works -
- Creator:
- Yan, Xiang (Jacob), Clarke, Phillipa J., Okullo, Dolorence, Goodspeed, Robert, Data Driven Detroit, Gomez-Lopez, Iris N., and Veinot, Tiffany C
- Description:
- This collection was produced as part of the project, “A ‘Big Data’ Approach to Understanding Neighborhood Effects in Chronic Illness Disparities.” The Investigators for the project are Tiffany Veinot, Veronica Berrocal, Phillipa Clarke, Robert Goodspeed, Daniel Romero, and VG Vinod Vydiswaran from the University of Michigan. The study took place from 2015-2016, with funding from the University of Michigan’s Social Sciences Annual Institute, MCubed, and the Sloan and Moore Foundations. Contact: Tiffany Veinot, MLS, PhD Office: 3443 North Quad Phone: 734/615-8281 Email: tveinot@umich.edu MCubed project page: https://mcubed.umich.edu/projects/%E2%80%9Cbig-data%E2%80%9D-approach-understanding-neighborhood-effects-chronic-illness-disparities
- Keyword:
- Food Environment, Health Status, Employment, Health Care Resources, Neighborhood Safety, Healthcare Utilization, Transportation, Census tract level, Information and Education Environment, Spatial Measures, Detroit, Active Living Resources, Social Environment, Demographics, Community Health, Housing, and student-friendly
- Discipline:
- Social Sciences
6Works -
Transmission of Oral microbiome and Sequencing
User Collection
- Creator:
- Lee, Kyu Han
- Description:
- De-identified participant data from household transmission study of influenza in Nicaragua Oligotype count table and taxonomic classifications
- Keyword:
- Influenza and Microbiome
- Discipline:
- Health Sciences
2Works -
Preterm Birth
User Collection- Creator:
- Betsy Foxman
- Description:
- This collection has been retired as of Sept 28. 2020 and replaced with the "Preterm Birth" work listed below.
- Discipline:
- Health Sciences
1Works -
Mound survey
User Collection
- Creator:
- Galaty, Michael
- Description:
- TBD
- Keyword:
- archaeology
- Discipline:
- Humanities and Social Sciences
0Works -
F3UEL: Flaring & Fossil Fuels: Uncovering Emissions & Losses
User Collection
- Creator:
- Kort, Eric and Plant, Genevieve
- Description:
- Fossil energy production, processing, flaring, and transmission all can harm climate and air quality by emitting greenhouse gases and air pollutants. Studies now show that onshore oil and gas production emit much more methane than what is inventoried, and that local air quality impacts can be significant, however, natural gas flaring and offshore systems have been largely overlooked. The F3UEL (Flaring & Fossil Fuels: Uncovering Emissions & Losses) project aims to address these gaps by improving our understanding of offshore emissions, characterizing how flares behave in the real world, identifying what portion of the offshore system is responsible for emissions, and determining how such systems can be monitored. Spanning three years (2020-2022), the project employed an aircraft platform to measure including both greenhouse gas and air quality measurements. To sample the largest regions of current and potential future offshore production and flaring, airborne measurements targeted the Gulf of Mexico, offshore California and Alaska, the Bakken Formation (North Dakota) and the Permian and Eagle Ford Basins (Texas). Data provided here includes the airborne measurements collected using Scientific Aviation’s Mooney aircraft platform, equipped with spectroscopic instrumentation to measure methane, carbon dioxide, water vapor, nitrous oxide, and nitrogen oxide, in addition to meteorological variables such as wind speed and direction. Data products from our analysis of these airborne measurements are also provided, including estimated flare destruction removal efficiency for the Bakken, Eagle Ford, and Permian basins. Each data file is in .csv format and is accompanied by a readme file with further information and descriptors of the variables included. All users should cite the papers and datasets provided in the readme files for each individual dataset. Website: https://graham.umich.edu/f3uel This project is funded by the Alfred P. Sloan Foundation with additional support from the Environmental Defense Fund, Scientific Aviation, and University of Michigan (College of Engineering, Climate and Space Sciences and Engineering; Graham Sustainability Institute).
- Keyword:
- offshore oil & gas, flaring, methane, Nitrogen oxides, natural gas flaring, and oil & gas
- Discipline:
- Science
4Works
- « Previous
- Next »
- 1
- 2
- 3
- 4