Search Constraints
Number of results to display per page
View results as:
Search Results
-
- Creator:
- BIRDS Lab U. Michigan
- Description:
- This dataset contains the videos used for https://doi.org/10.7302/m05a-0d90 (the "raw" motion tracking dataset), and is intended to be unpacked into the same directory tree. The data were produced for ARO W911NF-14-1-0573 "Morphologically Modulated Dynamics" and ARO MURI W911NF-17-1-0306 "From Data-Driven Operator Theoretic Schemes to Prediction, Inference, and Control of Systems" to explore the trade-offs between various oscillator coupling models in modeling multilegged locomotion. The data were also used extensively in examining multi-contact slipping, in the studying the influence of number of legs on otherwise identical locomotion patterns, and in the use of geometric mechanics models for multilegged locomotion. Folder and file names encode the meta-data, with names following an informative naming convention documented in the README.
- Keyword:
- phase, multilegged, robot, and locomotion
- Citation to related publication:
- BIRDS Lab U. Michigan. BIRDS Lab Multipod robot motion tracking data - RAW dataset [Data set], University of Michigan - Deep Blue Data. https://doi.org/10.7302/m05a-0d90, Zhao, D. Ph.D. Thesis "Locomotion of low-DOF multi-legged robots" University of Michigan 2021 https://deepblue.lib.umich.edu/handle/2027.42/169985, and Zhao, D. & Revzen, S. Multi-legged steering and slipping with low DoF hexapod robots Bioinspiration & biomimetics, 2020, 15, 045001 https://doi.org/10.1088/1748-3190/ab84c0
- Discipline:
- Science and Engineering
-
- Creator:
- Bougher, S. W. (CLaSP Department, University of Michigan)
- Description:
- The NASA MAVEN (Mars Atmosphere and Volatile Evolution) spacecraft, which is currently in orbit around Mars, has been taking systematic measurements of the densities and deriving temperatures in the upper atmosphere of Mars between about 140 to 240 km above the surface since late 2014. Wind measurement campaigns are also conducted once per month for 5-10 orbits. These densities, temperatures and winds change with time (e.g. solar cycle, season, local time) and location, and sometimes fluctuate quickly. Global dust storm events are also known to significantly impact these density, temperature and wind fields in the Mars thermosphere. For the current project, the inert light species helium is used to trace the circulation patterns and constrain wind magnitudes throughout the Mars thermosphere. Presently, more than 6 years of Neutral Gas and Ion Mass Spectrometer (NGIMS) measurements of helium densities have been obtained by the MAVEN team (e.g. Elrod et al., 2017; 2021; Gupta et al., 2021). Measured helium distributions are compared to simulations from a computer model of the Mars atmosphere called M-GITM (Mars Global Ionosphere-Thermosphere Model), developed at U. of Michigan. Since the global circulation plays a role in the structure, variability, and evolution of the atmosphere, understanding the processes that drive the winds in the upper atmosphere of Mars also provides the needed context for understanding helium distributions and how the atmosphere behaves as a whole system. Three dimensional M-GITM simulations for the Mars four cardinal seasons (Ls = 0, 90, 180, 270, for Mars Year 33) were conducted for detailed comparisons with NGIMS helium and CO2 distributions (Gupta et al. 2021). The M-GITM datacubes used to extract these densities (plus winds) along the trajectory of each orbit path between 140 and 240 km, are provided in this Deep Blue Data archive. README files are also provided for each datacube, detailing the contents of each file. In addition, a general README file is provided that summarizes the inputs and outputs of the M-GITM code simulations for this study. Finally, a basic version of the M-GITM code can be found on Github at https:/github.com/dpawlows/MGITM.
- Keyword:
- Mars, MAVEN Spacecraft Mission, Mars Thermosphere, Helium Density Distributions, and Neutral Gas and Ion Mass Spectrometer (NGIMS)
- Citation to related publication:
- Gupta, N., N. V. Rao, S. W. Bougher, and M. K. Elrod, Latitudinal and Seasonal Asymmetries of the Helium Bulge in the Martian Upper Atmosphere J. Geophys. Res., 126, XXXX-XXXX. doi:10.1002/2021JEXXXXXX
- Discipline:
- Engineering and Science
-
- Creator:
- Gliske, Stephen V and Stacey, William C
- Description:
- This data repository includes the quantitative features of high frequency, intracranial EEG along with all necessary scripts to reproduce the figures of the accompanying manuscript.
- Keyword:
- high frequency oscillation, HFO, high frequency activity, and epilepsy
- Citation to related publication:
- (under review)
- Discipline:
- Science, Engineering, and Health Sciences
-
- Creator:
- Ding, J, Moore, TY, and Gan, Z
- Description:
- Jerboas (Jaculus jaculus) are bipedal hopping rodents that frequently transition between gaits (running, hopping, and skipping) throughout their entire speed range. It has been hypothesized that these non-cursorial bipedal gait transitions are likely to enhance their maneuverability and predator evasion ability. However, it is difficult to use the underlying dynamics of these locomotion patterns to predict gait transitions due to the large number of degrees of freedom expressed by the animals. To this end, we used empirical jerboa kinematics and dynamics to develop a unified Spring Loaded Inverted Pendulum model with defined passive swing leg motions. The simulated trajectories from the model precisely matched the experimental data. Jerboas were observed to apply different neutral swing leg angles during locomotion. By investigating the gait structure of the model with coupled and uncoupled neutral swing leg, we found two set of mechanism may explain the frequent gait transitions of jerboas.
- Keyword:
- jerboa, legged locomotion, gait transition, Legged Robots, Dynamics, Bipedal locomotion, and Non-cursorial locomotion
- Citation to related publication:
- Ding, Moore, Gan (submitted) A template model explains jerboa gait transitions across a broad range of speeds. Frontiers in Bioengineering And Biotechnology
- Discipline:
- Science and Engineering
-
- Creator:
- Wu, Ziyou, Brunton, Steven L, and Revzen, Shai
- Description:
- These codes were produced as part of the Army Research Office Multi-University Research Initiative ARO MURI W911NF-17-1-0306 "From Data-Driven Operator Theoretic Schemes to Prediction, Inference, and Control of Systems" The code can be run using the runAll.sh shell script (in Linux and OS-X); code should work similarly under windows.
- Keyword:
- DMD, dimensionality reduction, dynamical systems, and nonlinear dynamics
- Discipline:
- Engineering and Science
-
- Creator:
- Huang, Cheng MI
- Description:
- A 2D planar representation of a generic laboratory-scale combustor is established to assess the capabilities of ROMs for representing realistic combustion flowfields. The purpose of this dataset is to provide a testbed to build reduced model for relevant challenging reacting flow problems using different methods. The dataset was generated under the Air Force Center of Excellence on Multi-Fidelity Modeling of Rocket Combustion Dynamics and the goal of the center is to advance the state-of-the-art in Reduced Order Models (ROMs) and enable efficient prediction of instabilities in liquid fueled rocket combustion systems., Instrument and/or Software specifications: - recommendation: Matlab and Tecplot, 1. Data_150000to159999.tar: the unsteady flow field data from time step 150000 to 159999 (time increment, dt, between each time step is 1E-7 sec). - Data_160000to169999.tar: the unsteady flow field data from time step 160000 to 169999 (time increment, dt, between each time step is 1E-7 sec). 2. Data_170000to179999.tar: the unsteady flow field data from time step 170000 to 179999 (time increment, dt, between each time step is 1E-7 sec). 3. grid.dat: the topology of the CFD mesh used to generate this data (can be directly loaded in Tecplot). 4. the file "sample_code.zip" contains the sample Matlab scripts to load and output the .dat files to help the researchers to get started. To run the script, the software Matlab is required and the researchers can simply run sampleIO.m script in Matlab to test the code. , and Detailed documentation of how the data is generated can be found in: https://afcoe.engin.umich.edu/benchmark-data
- Citation to related publication:
- Huang, C., Duraisamy, K., and Merkle, C.L., Investigations and Improvement of Robustness of Reduced-Order Models of Reacting Flow, AIAA Journal, 2019., Swischuk, R., Kramer, B., Huang, C., and Willcox, K., Learning Physics-Based Reduced-Order Models for a Single-Injector Combustion Process , AIAA Journal, 2020., and Harvazinski, M.E., Huang, C., Sankaran, V., Feldman, T.W., Anderson, W.E., Merkle, C.L., and Talley, D.G., Coupling between hydrodynamics, acoustics, and heat release in a self-excited unstable combustor, Physics of Fluids, 2015.
- Discipline:
- Engineering
-
- Creator:
- Smith, Joeseph P., Gronewold, Andrew D., Read, Laura, Crooks, James L., School for Environment and Sustainability, University of Michigan, Department of Civil and Environmental Engineering, University of Michigan, and Cooperative Institute for Great Lakes Research
- Description:
- Using the statistical programming package R ( https://cran.r-project.org/), and JAGS (Just Another Gibbs Sampler, http://mcmc-jags.sourceforge.net/), we processed multiple estimates of the Laurentian Great Lakes water balance components -- over-lake precipitation, evaporation, lateral tributary runoff, connecting channel flows, and diversions -- feeding them into prior distributions (using data from 1950 through 1979), and likelihood functions. The Bayesian Network is coded in the BUGS language. Water balance computations assume that monthly change in storage for a given lake is the difference between beginning of month water levels surrounding each month. For example, the change in storage for June 2015 is the difference between the beginning of month water level for July 2015 and that for June 2015., More details on the model can be found in the following summary report for the International Watersheds Initiative of the International Joint Commission, where the model was used to generate a new water balance historical record from 1950 through 2015: https://www.glerl.noaa.gov/pubs/fulltext/2018/20180021.pdf. Large Lake Statistical Water Balance Model (L2SWBM): https://www.glerl.noaa.gov/data/WaterBalanceModel/ , and This data set has a shorter timespan to accommodate a prior which uses data not used in the likelihood functions.
- Keyword:
- Water, Balance, Great Lakes, Laurentian, Machine, Learning, Lakes, Bayesian, and Network
- Citation to related publication:
- Smith, J., Gronewald, A. et al. Summary Report: Development of the Large Lake Statistical Water Balance Model for Constructing a New Historical Record of the Great Lakes Water Balance. Submitted to: The International Watersheds Initiative of the International Joint Commission. Accessible at https://www.glerl.noaa.gov/pubs/fulltext/2018/20180021.pdf, Large Lake Statistical Water Balance Model (L2SWBM). https://www.glerl.noaa.gov/data/WaterBalanceModel/, and Gronewold, A.D., Smith, J.P., Read, L. and Crooks, J.L., 2020. Reconciling the water balance of large lake systems. Advances in Water Resources, p.103505.
- Discipline:
- Science and Engineering
-
- Creator:
- Danforth, Shannon M.
- Description:
- This dataset includes three MATLAB data files for each subject: raw motion capture and force plate data, processed motion capture and force plate data, and sagittal-plane data segmented into individual trials labeled “nominal” or “tripped.” We include two example scripts for using the segmented trial data to tabulate trip recovery strategies across subjects and plot the sorted recovery strategies.
- Keyword:
- Trip recovery, Biomechanics, and Human locomotion
- Citation to related publication:
- S. M. Danforth, X. Liu, M. J. Ward, P.D. Holmes, and R. Vasudevan, "Predicting sagittal-plane swing hip kinematics in response to trips," IEEE Robotics and Automation Letters, 2022.
- Discipline:
- Engineering
-
- Creator:
- McSherry, Sean
- Description:
- This repository includes the analysis code and raw data for a paper titled "Nanophotonic control of thermal emission under extreme temperatures in air, " in Nature Nanotechnology (see citation). In our work, well defined structure-color effects guided the design of a nanostructure containing stratified layers of two oxides, magnesium oxide (MgO) and barium zirco-hafnate (BaZr0.5Hf0.5O3 or BZHO). The repeating layers were tuned in such a way to manipulate incident infrared wavelengths. The infrared is the spectral range in which heat (in the form of electromagnetic radiation) is emitted from objects. Therefore, the nanostructure serves as a way to alter the thermal emission spectrum of hot objects, controlling how much heat can flow. This can have significant impacts on a range of technologies, such as thermal photovoltaics (TPVs), which generate electricity from the infrared light emission of hot objects (compared to visible light emission from the sun in solar photovoltaics). We envision that our MgO/BZHO nanostructure can be paired with a thermal emitter in TPV systems to beneficially manipulate the flow of infrared light, leading to more efficient electricity production. To characterize the thermal stability of this structure, we had to characterize the thermal stability and optical performance at room temperature and at 1100 °C. This lead us to conduct several experiments using ellipsometry, TEM, EDS, and FTIR.
- Keyword:
- FTIR, Infrared, Photonic Crystal, MgO, Refractory , Ellipsometry, Spectroscopy, Superlattice, and Thermal Emission
- Citation to related publication:
- McSherry et al. Nature Nanotechnology (In Press). 2022
- Discipline:
- Engineering
-
- Creator:
- Baskar, Deepika and Gorodetsky, Alex
- Description:
- Studying the effect of wind on urban air mobility typically requires comprehensive fluid dynamics simulations in a realistic urban geometry. Motivated to enable wide-spread autonomous drone activity in urban centers, such studies have indeed been considered by several authors in the recent literature. However, the accessibility of these approaches to those with less fluid dynamics experience and/or without access to purpose built simulation tools has limited validation and application of the resulting path planning strategies. and The .dat files contain the flow variables for each of the 402240 points sampled from the region under study. For flow visualization purposes, the .dat files are readable using Tecplot Software.
- Keyword:
- UAM, Energy efficient path planning , CFD, and City of Boston
- Citation to related publication:
- Baskar, D., & Gorodetsky, A. (2020). A Simulated Wind-field Dataset for Testing Energy Efficient Path-Planning Algorithms for UAVs in Urban Environment. In AIAA AVIATION 2020 FORUM. American Institute of Aeronautics and Astronautics. https://doi.org/10.2514/6.2020-2920
- Discipline:
- Other and Engineering
-
- Creator:
- Payam Mirshams Shahshahani
- Description:
- The two R codes are related to the feasible balance region calculations for Figures 2, 3, and 4 in the paper. The MATLAB codes are related to the simulations of the recoverable initial quasi-static states, the results of which are shown in Figure 5 of the paper.
- Keyword:
- One-legged balance, Biomechanics, Hip Abductor, and Unipedal Stance
- Citation to related publication:
- Shahshahani, P. M., & Ashton-Miller, J. A. (2020). On the importance of the hip abductors during a clinical one legged balance test: A theoretical study. PLOS ONE, 15(11), e0242454. https://doi.org/10.1371/journal.pone.0242454
- Discipline:
- Health Sciences and Engineering
-
- Creator:
- Huffaker, Jordan S., Kummerfeld, Jonathan K., Lasecki, Walter S., and Ackerman, Mark S.
- Description:
- The following files include supplementary materials for our CHI 2020 paper "Crowdsourced Detection of Emotionally Manipulative Language". Namely, these materials include the dataset that was used in the evaluation. See the paper for more details.
- Keyword:
- Crowdsourcing, Media Manipulation, Rhetoric, and Emotion
- Citation to related publication:
- J.S. Huffaker, J.K. Kummerfeld, W.S. Lasecki, M.S. Ackerman. Crowdsourced Detection of Emotionally Manipulative Language. In Proceedings of the ACM Conference on Human Factors in Computing Systems (CHI 2020). Honolulu, HI. 2020.
- Discipline:
- Engineering
-
- Creator:
- Jiao, Zhenbang, Chen, Yang, and Manchester, Ward
- Description:
- GOES_flare_list: contains a list of more than 12,013 flare events. The list has 6 columns, flare classification, active region number, date, start time end time, emission peak time. SHARP_data.hdf5 files contain time series of 20 physical variables derived from the SDO/HMI SHARP data files. These data are saved at a 12 minute cadence and are used to train the LSTM model.
- Keyword:
- Solar Flare Prediction and Machine Learning
- Citation to related publication:
- Jiao, Z., Sun, H., Wang, X., Manchester, W., Gombosi, T., Hero, A., & Chen, Y. (2020). Solar Flare Intensity Prediction With Machine Learning Models. Space Weather, 18(7), e2020SW002440. https://doi.org/10.1029/2020SW002440 and Chen, Y., & Manchester, W. (2019). Data and Data products for machine learning applied to solar flares [Data set], University of Michigan - Deep Blue. https://doi.org/10.7302/qnsq-cs38
- Discipline:
- Engineering and Science
-
- Creator:
- BIRDS Lab U. Michigan
- Description:
- These data were produced for ARO W911NF-14-1-0573 "Morphologically Modulated Dynamics" and ARO MURI W911NF-17-1-0306 "From Data-Driven Operator Theoretic Schemes to Prediction, Inference, and Control of Systems" to explore the trade-offs between various oscillator coupling models in modeling multilegged locomotion. The data were also used extensively in examining multi-contact slipping, in the studying the influence of number of legs on otherwise identical locomotion patterns, and in the use of geometric mechanics models for multilegged locomotion. Folder and file names encode the meta-data, with names following an informative naming convention documented in the README.
- Keyword:
- phase, multilegged, robot, and locomotion
- Citation to related publication:
- Zhao, D. & Revzen, S. Multi-legged steering and slipping with low DoF hexapod robots Bioinspiration & biomimetics, 2020, 15, 045001 https://doi.org/10.1088/1748-3190/ab84c0 and Zhao, D. Ph.D. Thesis "Locomotion of low-DOF multi-legged robots" University of Michigan 2021 https://deepblue.lib.umich.edu/handle/2027.42/169985
- Discipline:
- Science and Engineering
-
- Creator:
- Arthurs, Christopher J., Khlebnikov, Rostislav, Melville, Alexander, Marčan, Marija, Gomez, Alberto, Dillon-Murphy, Desmond, Cuomo, Federica, Vieira, Miguel, Schollenberger, Jonas, Lynch, Sabrina, Tossas-Betancourt, Christopher, Iyer, Kritika, Hopper, Sara, Livingston, Elizabeth, Youssefi, Pouya, Noorani, Alia, Ben Ahmed, Sabrina, Nauta, Foeke J.N., van Bakel, Theodorus M.J., Ahmed, Yunus, van Bakel, Petrus A.J., Mynard, Jonathan, Di Achille, Paolo, Gharahi, Hamid, Lau, Kevin D., Filonova, Vasilina, Aguirre, Miquel, Nama, Nitesh, Xiao, Nan, Baek, Seungik, Garikipati, Krishna, Sahni, Onkar, Nordsletten, David, and Figueroa, Carlos A.
- Description:
- This repository contains the source code for the CRIMSON Flow Solver as required in the PLOS Computational Biology publication: CRIMSON: An Open-Source Software Framework for Cardiovascular Integrated Modelling and Simulation by the same authors., This is a snapshot of the software. Please visit https://github.com/carthurs/CRIMSONFlowsolver/releases/tag/PLOS_Comp_Bio & www.crimson.software for more general information and the most up to date version of the software. , and Software can be compiled in Cygwin and Linux.
- Keyword:
- Blood Flow Simulation, Patient-specific, Open-source Software, Image-based simulation, Cardiovascular Medical Image, Segmentation, and Finite Element Simulation
- Citation to related publication:
- CRIMSON: An Open-Source Software Framework for Cardiovascular Integrated Modelling and Simulation C.J. Arthurs, R. Khlebnikov, A. Melville, M. Marčan, A. Gomez, D. Dillon-Murphy, F. Cuomo, M.S. Vieira, J. Schollenberger, S.R. Lynch, C. Tossas-Betancourt, K. Iyer, S. Hopper, E. Livingston, P. Youssefi, A. Noorani, S. Ben Ahmed, F.J.H. Nauta, T.M.J. van Bakel, Y. Ahmed, P.A.J. van Bakel, J. Mynard, P. Di Achille, H. Gharahi, K. D. Lau, V. Filonova, M. Aguirre, N. Nama, N. Xiao, S. Baek, K. Garikipati, O. Sahni, D. Nordsletten, C.A. Figueroa bioRxiv 2020.10.14.339960; doi: https://doi.org/10.1101/2020.10.14.339960 and Arthurs, C., Khlebnikov, R., Melville, A., Marčan, M., Gomez, A., Dillon-Murphy, D., Cuomo, F., Vieira, M., Schollenberger, J., Lynch, S., Tossas-Betancourt, C., Iyer, K., Hopper, S., Livingston, E., Youssefi, P., Noorani, A., Ben Ahmed, S., Nauta, F., van Bakel, T., Ahmed, Y., van Bakel, P., Mynard, J., Di Achille, P., Gharahi, H., Lau, K., Filonova, V., Aguirre, M., Nama, N., Xiao, N., Baek, S., Garikipati, K., Sahni, O., Nordsletten, D., Figueroa, C. (2021). CRIMSON open source project - Graphical User Interface (GUI) Source Code for PLOS Computational Biology [Data set]. University of Michigan - Deep Blue. https://doi.org/10.7302/679b-dw96
- Discipline:
- Engineering and Health Sciences
-
- Creator:
- Ayumi Fujisaki-Manome
- Description:
- Precipitation impacts on ice cover and water temperature in the Laurentian Great Lakes were examined using state-of-art coupled ice-hydrodynamic models. Numerical experiments were conducted for the recent anomalously cold (2014-2015) and warm (2015-2016) winters that were accompanied by high and low ice coverage over the lakes, respectively. The results of numerical experiments showed that, snow cover on the ice, which is the manifestation of winter precipitation, reduced the total ice volume (or mean ice thickness) in all of the Great Lakes, shortened the ice duration, and allowed earlier warming of water surface. The reduced ice volume was due to the thermal insulation of snow cover. The surface albedo was also increased by snow cover, but its impact on the delay the melting of ice was overcome by the thermal insulation effect. During major snowstorms, snowfall over the open lake caused notable cooling of the water surface due to latent heat absorption. Overall, the sensible heat flux from rain in spring and summer was found to have negligible impacts on the water surface temperature. Although uncertainties remain in over-lake precipitation estimates and model’s representation of snow on the ice, this study demonstrated that winter precipitation, particularly snowfall on the ice and water surfaces, is an important contributing factor in Great Lakes ice production and thermal conditions from late fall to spring.
- Keyword:
- Great Lakes, lake ice, numerical modeling, and precipitation
- Citation to related publication:
- Fujisaki-Manome, A., Anderson, E. J., Kessler, J. A., Chu, P. Y., Wang, J., & Gronewold, A. D. (2020). Simulating Impacts of Precipitation on Ice Cover and Surface Water Temperature Across Large Lakes. Journal of Geophysical Research: Oceans, 125(5), e2019JC015950. https://doi.org/10.1029/2019JC015950
- Discipline:
- Science and Engineering
-
- Creator:
- Computational Vascular Biomechanics Lab @ the University of Michigan and other collaborators, The Qt Company, NSIS Team and contributors, PostgreSQL Global Development Group, Oracle Corporation, and Kitware
- Description:
- This repository contains several open-source components as well as software developed by our own lab that are required to build the GUI of the open source CRIMSON software from scratch using Visual Studio 2013 update 5:, cmake-3.13.5-win64-x64.zip: build tool; nsis-3.05-setup.exe: packaging tool; postgresql-9.5.21-1-windows-x64-binaries.zip: Qt dependency; presolver_win.zip: windows binary for CRIMSON Presolver built using MinGW; qt-opensource-windows-x86-msvc2013_64-5.7.0.exe: Qt GUI library; mysql-5.7.29-winx64.zip: Qt dependencies, Software in this repository is a snapshot; please visit https://github.com/carthurs/CRIMSONGUI & www.crimson.software for more general information and the most up to date version of the software., and This repository completes the following Deep Blue repository: GUI repository: https://doi.org/10.7302/679b-dw96
- Citation to related publication:
- CRIMSON: An Open-Source Software Framework for Cardiovascular Integrated Modelling and Simulation C.J. Arthurs, R. Khlebnikov, A. Melville, M. Marčan, A. Gomez, D. Dillon-Murphy, F. Cuomo, M.S. Vieira, J. Schollenberger, S.R. Lynch, C. Tossas-Betancourt, K. Iyer, S. Hopper, E. Livingston, P. Youssefi, A. Noorani, S. Ben Ahmed, F.J.H. Nauta, T.M.J. van Bakel, Y. Ahmed, P.A.J. van Bakel, J. Mynard, P. Di Achille, H. Gharahi, K. D. Lau, V. Filonova, M. Aguirre, N. Nama, N. Xiao, S. Baek, K. Garikipati, O. Sahni, D. Nordsletten, C.A. Figueroa bioRxiv 2020.10.14.339960; doi: https://doi.org/10.1101/2020.10.14.339960 and Arthurs, C., Khlebnikov, R., Melville, A., Marčan, M., Gomez, A., Dillon-Murphy, D., Cuomo, F., Vieira, M., Schollenberger, J., Lynch, S., Tossas-Betancourt, C., Iyer, K., Hopper, S., Livingston, E., Youssefi, P., Noorani, A., Ben Ahmed, S., Nauta, F., van Bakel, T., Ahmed, Y., van Bakel, P., Mynard, J., Di Achille, P., Gharahi, H., Lau, K., Filonova, V., Aguirre, M., Nama, N., Xiao, N., Baek, S., Garikipati, K., Sahni, O., Nordsletten, D., Figueroa, C. (2021). CRIMSON open source project - Graphical User Interface (GUI) Source Code for PLOS Computational Biology [Data set]. University of Michigan - Deep Blue. https://doi.org/10.7302/679b-dw96
- Discipline:
- Health Sciences and Engineering
-
- Creator:
- Bougher, S. W. (CLaSP Department, U. of Michigan), Roeten, K. J. (CLaSP Department, U. of Michigan), and Sharrar, R. (Astronomy Department, U. of Michigan)
- Description:
- The NASA MAVEN (Mars Atmosphere and Volatile Evolution) spacecraft, which is currently in orbit around Mars, has been taking daily (systematic) measurements of the densities and temperatures in the upper atmosphere of Mars between about 140 to 240 km above the surface. Wind measurement campaigns are also conducted once per month for 5-10 orbits. These densities, temperatures and winds change with time (e.g. season, local time) and location, and sometimes fluctuate quickly. Global dust storm events are also known to significantly impact these density, temperature and wind fields in the Mars thermosphere. Such global dust storm period measurements can be compared to simulations from a computer model of the Mars atmosphere called M-GITM (Mars Global Ionosphere-Thermosphere Model), developed at U. of Michigan. This is the first detailed comparison between direct global dust storm period measurements in the upper atmosphere of Mars and simulated MGITM fields and is important because it can help to inform us what physical processes are acting on the upper atmosphere during such large dust events. Since the global circulation plays a role in the structure, variability, and evolution of the atmosphere, understanding the processes that drive the winds in the upper atmosphere of Mars also provides key context for understanding how the atmosphere behaves as a whole system. A basic version of the M-GITM code can be found on Github as follows: https:/github.com/dpawlows/MGITM and About 4 months of Neutral Gas and Ion Mass Spectrometer (NGIMS) measurements of densities and winds have been made by the MAVEN team during the summer of 2018 (Elrod et al., 2019). Nine reference measurement intervals during this global dust storm (1-June through 30-August 2018) are selected for detailed study (Elrod et al. 2019). The Mars conditions for these nine intervals have been used to launch corresponding M-GITM code simulations, yielding 3-D neutral density, temperature and wind fields for comparison to these NGIMS measurements. The M-GITM datacubes used to extract the density, temperature and neutral winds, along the trajectory of each orbit path between 140 and 240 km, are provided in this Deep Blue Data archive. README files are provided for each datacube, detailing the contents of each file. A general README file is also provided that summarizes the inputs and outputs of the M-GITM code simulations for this study.
- Keyword:
- Mars, MAVEN Spacecraft, Mars Thermosphere, and Mars Global Dust Storm of 2018
- Citation to related publication:
- Elrod, M. K., S. W. Bougher, K. Roeten, R. Sharrar, J. Murphy, Structural and Compositional Changes in the Upper Atmosphere related to the PEDE-2018 Dust Event on Mars as Observed by MAVEN NGIMS, Geophys. Res. Lett., (2019). doi: 10.1029/2019GL084378. and Jain, S. K., Bougher, S. W., Deighan, J., Schneider, N. M., Gonzalez‐Galindo, F., Stewart, A. I. F., et al. ( 2020). Martian thermospheric warming associated with the Planet Encircling Dust Event of 2018. Geophysical Research Letters, 47, e2019GL085302. https://doi.org/10.1029/2019GL085302
- Discipline:
- Engineering and Science
-
- Creator:
- Brandt, Daniel, A., Bussy-Virat, Charles, D., and Ridley, Aaron, J.
- Description:
- The Multifaceted Optimization Algorithm (MOA) is a tool for generating corrected empirical model thermospheric densities during geomagnetic storms. It consists of a suite of Python functions that operate around the Spacecraft Orbit Characterization Kit (SpOCK), an orbital propagator developed by Charles D. Bussy-Virat, PhD, Joel Getchius, and Aaron J. Ridley, PhD at the University of Michigan, and it estimates new densities for the NRLMSISE-00 atmospheric model. MOA generates new model densities by estimating modifications to inputs to the NLRMSISE-00 model that minimize the orbit error between modeled spacecraft in SpOCK, and their actual altitudes as described in publicly-available Two-Line Element Sets (TLEs), made available online via Space-track.org. MOA consists of three sub-process: (1) The Area Optimization Algorithm (AROPT), (2) the F10.7 Optimization Algorithm (FOPT), and (3) the Ap Optimization Algorithm (APOPT). AROPT computes the contribution to the drag of the modeled spacecraft due to their varying projected area. FOPT estimates modifications to the 10.7 cm solar radio flux in NRLMSISE-00, and APOPT estimates modifications to the Earth's magnetic activity in NRLMSISE-00. MOA finds these modifications across many spacecraft, and the medians of those modifications are then applied in NLRMSISE-00 along the orbit of another satellite to generate new densities for verification. In this instance, modifications are applied along the orbits of the Swarm spacecraft and compared to Swarm GPS-derived densities.
- Keyword:
- Orbit, Satellite, Two-line Element Set, Thermosphere, and Drag
- Citation to related publication:
- Brandt, D. A., Bussy-Virat, C. D., & Ridley, A. J. (2020). A Simple Method for Correcting Empirical Model Densities During Geomagnetic Storms Using Satellite Orbit Data. Space Weather, 18(12), e2020SW002565. https://doi.org/10.1029/2020SW002565
- Discipline:
- Engineering
-
- Creator:
- Sugrue, Dennis P.
- Description:
- Our work seeks to better understand the financial risks to corporate operations as a basis for exploring alternative public-private investment strategies. We applied network analysis to model financial relationships within this sector and its connectedness to primary commodities transported on the Great Lakes. The financial network maps were used to quantitatively analyze the industry risk exposure using corporate financial metrics and to query the financial interdependencies of companies relative to the Great Lakes waterway. Results demonstrate that inventory turnover ratio is a robust proxy to quantify weighted financial risks of water dependency across the entire supply chain network. All data was manually collected from the Bloomberg Terminal and FactSet which are licensed by the University of Michigan. The SPLC module in the Terminal restricts data download and information must be captured manually. All data was collected from September-November 2018.
- Keyword:
- Iron Ore, Supply Chain, Bloomberg Terminal, and Great Lakes
- Citation to related publication:
- Sugrue, Dennis, Abigail Martin, and Peter Adriaens. (under review). “Financial Network Analysis to Inform Infrastructure Investment: Great Lakes Waterway and the Steel Supply Chain.” Journal of Infrastructure Systems, American Society of Civil Engineers.
- Discipline:
- Engineering
-
- Creator:
- Wang, Yeqing, Gao, Jianrong, Ren, Yang, De Andrade, Vincent, and Shahani, Ashwin J
- Description:
- The data file contains (1) the grayscale images of the nano-tomography experiments that can be segmented into binary images and visualized to show the 3D morphology of three-phase spiral eutectics; and (2) Scanning electron micro of solidified sample.
- Keyword:
- Zinc alloys, spiral structure, thermodynamic calculations, synchrotron X-ray diffraction, and synchrotron X-ray nano-tomography
- Discipline:
- Engineering
-
- Creator:
- Hegedus, Alexander M
- Description:
- This is the README for the LunarSynchrotronArray package, maintained by Dr. Alex Hegedus alexhege@umich.edu This code repository corresponds to the Hegedus et al. 2020 (accepted) Radio Science paper, "Measuring the Earth's Synchrotron Emission from Radiation Belts with a Lunar Near Side Radio Array". The arxiv link for the paper is https://arxiv.org/abs/1912.04482. The DOI link is https://doi.org/10.1029/2019RS006891 , The Earth's Ionosphere is home to a large population of energetic electrons that live in the balance of many factors including input from the Solar wind, and the influence of the Earth's magnetic field. These energetic electrons emit radio waves as they traverse Earth's magnetosphere, leading to short‐lived, strong radio emissions from local regions, as well as persistent weaker emissions that act as a global signature of the population breakdown of all the energetic electrons. Characterizing this weaker emission (Synchrotron Emission) would lead to a greater understanding of the energetic electron populations on a day to day level. A radio array on the near side of the Moon would always be facing the Earth, and would well suited for measuring its low frequency radio emissions. In this work we simulate such a radio array on the lunar near side, to image this weaker synchrotron emission. The specific geometry and location of the test array were made using the most recent lunar maps made by the Lunar Reconnaissance Orbiter. This array would give us unprecedented day to day knowledge of the electron environment around our planet, providing reports of Earth's strong and weak radio emissions, giving both local and global information. , This set of codes should guide you through making the figures in the paper, as well as hopefully being accessible enough for changing the code for your own array. I would encourage you to please reach out to collaborate if that is the case! Requirements: , and CASA 4.7.1 (or greater?) built on python 2.7 Example link for Red Hat 7 https://casa.nrao.edu/download/distro/casa/release/el7/casa-release-4.7.1-el7.tar.gz Users may follow this guide to download and install the correct version of CASA for their system https://casa.nrao.edu/casadocs/casa-5.5.0/introduction/obtaining-and-installing CASA executables should be fairly straightforward to extract from the untarred files. gcc 4.8.5 or above (or below?) GCC installation instructions can be found here: https://gcc.gnu.org/install/ SPICE (I use cspice here) https://naif.jpl.nasa.gov/naif/toolkit_C.html As seen in lunar_furnsh.txt which loads the SPICE kernels, you also must download KERNELS_TO_LOAD = ( '/home/alexhege/SPICE/LunarEph/moon_pa_de421_1900-2050.bpc' '/home/alexhege/SPICE/LunarEph/moon_080317.tf' '/home/alexhege/SPICE/LunarEph/moon_assoc_me.tf' '/home/alexhege/SPICE/LunarEph/pck00010.tpc' '/home/alexhege/SPICE/LunarEph/naif0008.tls' '/home/alexhege/SPICE/LunarEph/de430.bsp' ) All of which can be found at https://naif.jpl.nasa.gov/pub/naif/generic_kernels/ SLDEM2015_128_60S_60N_000_360_FLOAT.IMG for the lunar surface data by LRO LOLA found at http://imbrium.mit.edu/DATA/SLDEM2015/GLOBAL/FLOAT_IMG/
- Citation to related publication:
- Hegedus, A., Nenon, Q., Brunet, A., Kasper, J., Sicard, A., Cecconi, B., MacDowall, R., & Baker, D. (2019). Measuring the Earth's Synchrotron Emission from Radiation Belts with a Lunar Near Side Radio Array. https://arxiv.org/abs/1912.04482 and Hegedus, A., Nenon, Q., Brunet, A., Kasper, J., Sicard, A., Cecconi, B., MacDowall, R., & Baker, D. (2020). Radio Science. https://doi.org/10.1029/2019RS006891
- Discipline:
- Engineering and Science
-
- Creator:
- Brandt, Daniel, A. and Ridley, Aaron, J.
- Description:
- The research that produced this data focused on conducting a statistical comparison between horizontal winds modeled with GITM and those derived from the accelerometer aboard the GOCE satellite. The winds from GITM and GOCE were compared by constructing their respective probability densities under different levels of geomagnetic activity, and by distributing them as a function of geomagnetic activity, magnetic latitude, magnetic local time, day-of-the-year, and solar radio flux.
- Keyword:
- Thermosphere, GITM, GOCE, Neutral winds, and Thermospheric modeling
- Discipline:
- Science and Engineering
-
- Creator:
- Smith, Joeseph P., Gronewold, Andrew D., Read, Laura, Crooks, James L., School for Environment and Sustainability, University of Michigan, Department of Civil and Environmental Engineering, University of Michigan, and Cooperative Institute for Great Lakes Research, University of Michigan
- Description:
- Using the statistical programming package R ( https://cran.r-project.org/), and JAGS (Just Another Gibbs Sampler, http://mcmc-jags.sourceforge.net/), we processed multiple estimates of the Laurentian Great Lakes water balance components -- over-lake precipitation, evaporation, lateral tributary runoff, connecting channel flows, and diversions -- feeding them into prior distributions (using data from 1950 through 1979), and likelihood functions. The Bayesian Network is coded in the BUGS language. Water balance computations assume that monthly change in storage for a given lake is the difference between beginning of month water levels surrounding each month. For example, the change in storage for June 2015 is the difference between the beginning of month water level for July 2015 and that for June 2015., More details on the model can be found in the following summary report for the International Watersheds Initiative of the International Joint Commission, where the model was used to generate a new water balance historical record from 1950 through 2015: https://www.glerl.noaa.gov/pubs/fulltext/2018/20180021.pdf. Large Lake Statistical Water Balance Model (L2SWBM): https://www.glerl.noaa.gov/data/WaterBalanceModel/, and This data set has a shorter timespan to accommodate a prior which uses data not used in the likelihood functions.
- Keyword:
- Water, Balance, Great Lakes, Laurentian, Machine Learning, Machine, Learning, Lakes, Bayesian, and Network
- Citation to related publication:
- Smith, J., Gronewald, A. et al. Summary Report: Development of the Large Lake Statistical Water Balance Model for Constructing a New Historical Record of the Great Lakes Water Balance. Submitted to: The International Watersheds Initiative of the International Joint Commission. Accessible at https://www.glerl.noaa.gov/pubs/fulltext/2018/20180021.pdf, Large Lake Statistical Water Balance Model (L2SWBM). https://www.glerl.noaa.gov/data/WaterBalanceModel/, and Gronewold, A.D., Smith, J.P., Read, L. and Crooks, J.L., 2020. Reconciling the water balance of large lake systems. Advances in Water Resources, p.103505.
- Discipline:
- Science and Engineering
-
- Creator:
- Batterman, Stuart; University of Michigan
- Description:
- We evaluated PM levels at the Agbogbloshie e-waste and scrap yard site in Accra, Ghana, and at upwind and downwind locations. This monitoring forms part of the West Africa-Michigan Charter II for GEOHealth cohort study, which is analyzing occupational exposures and health risks at this site.
- Keyword:
- Air pollution, particulate matter, e-waste, Fires, and monitoring
- Citation to related publication:
- Kwarteng, L., Baiden, E. A., Fobil, J., Arko-Mensah, J., Robins, T., & Batterman, S. (2020). Air Quality Impacts at an E-Waste Site in Ghana Using Flexible, Moderate-Cost and Quality-Assured Measurements. GeoHealth, 4(8), e2020GH000247. https://doi.org/10.1029/2020GH000247
- Discipline:
- Health Sciences and Engineering
-
- Creator:
- Agnit Mukhopadhyay
- Description:
- Conducting quantitative metrics-based performance analysis of first-principles-based global magnetosphere models is an essential step in understanding their capabilities and limitations, and providing scope for improvements in order to enhance their space weather prediction capabilities for a range of solar conditions. In this study, a detailed comparison of the performance of three global magnetohydrodynamic (MHD) models in predicting the Earth’s magnetopause location and ionospheric cross polar cap potential (CPCP) has been presented. Using the Community Coordinated Modeling Center’s Run-on-Request system and extensive database on results from various magnetospheric scenarios simulated for a variety of solar wind conditions, the aforementioned model predictions have been compared for magnetopause standoff distance estimations obtained from six empirical models, and with cross polar cap potential estimations obtained from the Assimmilative Mapping of Ionospheric Electrodynamics (AMIE) Model and the Super Dual Auroral Radar Network (SuperDARN) observations. We have considered a range of events spanning different space weather activity to analyze the performance of these models. Using a fit performance metric analysis for each event, we have quantified the models’ reproducibility of magnetopause standoff distances and CPCP against empirically-predicted observations, and identified salient features that govern the performance characteristics of the modeled magnetospheric and ionospheric quantities.
- Citation to related publication:
- Mukhopadhyay, A., Jia, X., Welling, D. T., & Liemohn, M. W. (2021). Global Magnetohydrodynamic Simulations: Performance Quantification of Magnetopause Distances and Convection Potential Predictions. Frontiers in Astronomy and Space Sciences, 8. https://doi.org/10.3389/fspas.2021.637197
- Discipline:
- Engineering and Science
-
- Creator:
- Pine, Alexandra F and Love, Brian J
- Description:
- This data is from a project concerned with dehydrating samples of saturated superabsorbent polymer using a centrifuge. The goal was to consider centrifugation as an energy efficient scheme to dehydrate SAP with the notion of reusing it. The data provided contains mass fractions of solvent removed through centrifugation with varied parameters.
- Keyword:
- Superabsorbent Polymer
- Citation to related publication:
- Pine, A., Wu, C. C., Raghavan, S., & Love, B. (2021). The efficiency of dehydrating desiccants by centrifugation: An assessment of superabsorbent polymers. Drying Technology, 0(0), 1–8. https://doi.org/10.1080/07373937.2021.1939710
- Discipline:
- Engineering
-
- Creator:
- Weng, Andrew, Mohtat, Peyman, Attia, Peter, Less, Greg, Lee, Suhak, and Stefanopoulou, Anna
- Description:
- The goal of this research is to investigate the impact of fast formation protocol on battery lifetime. The dataset has also been used to explore data-driven approaches in battery lifetime estimation (manuscript under review). Source code used to generate the results for this work has been included. The file contents contain a detailed README.md file which describes the organization of the files.
- Citation to related publication:
- Weng et al., Predicting the impact of formation protocols on battery lifetime immediately after manufacturing, Joule (2021), https://doi.org/10.1016/j.joule.2021.09.015
- Discipline:
- Engineering
-
- Creator:
- Arthurs, Christopher J., Khlebnikov, Rostislav, Melville, Alexander, Marčan, Marija, Gomez, Alberto, Dillon-Murphy, Desmond, Cuomo, Federica, Vieira, Miguel, Schollenberger, Jonas, Lynch, Sabrina, Tossas-Betancourt, Christopher, Iyer, Kritika, Hopper, Sara, Livingston, Elizabeth, Youssefi, Pouya, Noorani, Alia, Ben Ahmed, Sabrina, Nauta, Foeke J.N., van Bakel, Theodorus M.J., Ahmed, Yunus, van Bakel, Petrus A.J., Mynard, Jonathan, Di Achille, Paolo, Gharahi, Hamid, Lau, Kevin D., Filonova, Vasilina, Aguirre, Miquel, Nama, Nitesh, Xiao, Nan, Baek, Seungik, Garikipati, Krishna, Sahni, Onkar, Nordsletten, David, and Figueroa, Carlos A.
- Description:
- This repository includes the following:, - Example Case A: complete process of creating a model, running the simulation and examining the results., - Example Case B: segmenting and imposing a patient-specific aortic inflow velocity profile from a provide PC-MRI dataset., - Example Case C: simulation of a patient under rest conditions, and then of the same patient under post-liver-transplant conditions., - GUI Windows Binary Executable (version 2019.11.01), and - Flow Solver Windows Binary Executable (version 1.4.4, 2019.11.01)
- Keyword:
- Blood Flow Simulation, Patient-specific, Open-source Software, Image-based simulation, Cardiovascular Medical Image, Segmentation, and Finite Element Simulation
- Citation to related publication:
- CRIMSON: An Open-Source Software Framework for Cardiovascular Integrated Modelling and Simulation C.J. Arthurs, R. Khlebnikov, A. Melville, M. Marčan, A. Gomez, D. Dillon-Murphy, F. Cuomo, M.S. Vieira, J. Schollenberger, S.R. Lynch, C. Tossas-Betancourt, K. Iyer, S. Hopper, E. Livingston, P. Youssefi, A. Noorani, S. Ben Ahmed, F.J.H. Nauta, T.M.J. van Bakel, Y. Ahmed, P.A.J. van Bakel, J. Mynard, P. Di Achille, H. Gharahi, K. D. Lau, V. Filonova, M. Aguirre, N. Nama, N. Xiao, S. Baek, K. Garikipati, O. Sahni, D. Nordsletten, C.A. Figueroa bioRxiv 2020.10.14.339960; doi: https://doi.org/10.1101/2020.10.14.339960
- Discipline:
- Engineering and Health Sciences
-
- Creator:
- Figueroa, C. Alberto
- Description:
- This .stl file represents the largest vessels of the cerebral circulation, specifically around the Circle of Willis. The file was created from a Computed Tomography Angiography (CTA) of a relatively healthy patient. It consisted of a 512 x 512 x 709 voxel image with a resolution of 0:35 mm x 0:35 mm x 0:5 mm. The model includes the basilar artery (1), left and right internal carotid arteries (2, and 3), left and right anterior cerebral arteries (4, and 5), left and right middle cerebral arteries (6, and 7), left and right posterior cerebral arteries (8, and 9), and various communicating arteries (10, 11, and 12).
- Keyword:
- Circle of Willis, Blood flow simulation, Hemodynamics, and Benchmarking blood flow
- Citation to related publication:
- N. Wilson, K. Wang, R. Dutton, C.A. Taylor, "A software framework for creating patient specific geometric models from medical imaging data for simulation based medical planning of vascular surgery", Medical Image Computing and Computer-Assisted Intervention MICCAI 2001, Springer, 2001, pp. 449–456. doi: 10.1007/3-540-45468-3_54 and N. Xiao, J.D. Humphrey, C.A. Figueroa, "Multi-Scale Computational Model of Three-Dimensional Hemodynamics within a Deformable Full-Body Arterial Network”, Journal of Computational Physics, 2013, Vol 244, pp. 22-40. doi: 10.1016/j.jcp.2012.09.016
- Discipline:
- Engineering and Health Sciences
-
- Creator:
- Nason, Samuel R., Vaskov, Alex K., Willsey, Matthew S., Welle, Elissa J., An, Hyochan, Vu, Philip P., Bullard, Autumn J., Nu, Chrono S., Kao, Jonathan C., Shenoy, Krishna V., Jang, Taekwang, Kim, Hun-Seok, Blaauw, David, Patil, Parag G., and Chestek, Cynthia A.
- Description:
- This data is a subset of the data used to generate figures similar to figures 1, 2, 3, and 4 in Nason et al., 2020, Nature Biomedical Engineering. The purpose of the study was to demonstrate the benefits of using spiking band power, a low-power but single unit specific recording signal, for brain-machine interfaces with nonhuman primates with the potential to impact low-power brain-machine interfaces with humans. All of the data is contained in .mat files, which can be commonly opened by Matlab and the Python scipy library.
- Keyword:
- Brain-machine interface, Prosthesis, and Neural recording
- Citation to related publication:
- Nason, S.R., Vaskov, A.K., Willsey, M.S., Welle, E.J., An, H., Vu, P.P., Bullard, A.J., Nu, C.S., Kao, J.C., Shenoy, K.V., Jang, T., Kim, H.-S., Blaauw, D., Patil, P.G., and Chestek, C.A. (2020). A low-power band of neuronal spiking activity dominated by local single units improves the performance of brain–machine interfaces. Nat. Biomed. Eng. 4, 973–983. https://doi.org/10.1038/s41551-020-0591-0
- Discipline:
- Engineering
-
- Creator:
- Nason, Samuel R., Mender, Matthew J., Vaskov, Alex K., Willsey, Matthew S., Ganesh Kumar, N., Kung, Theodore A., Patil, Parag G., and Chestek, Cynthia A.
- Description:
- This data is a subset of the data used to generate components of all figures in the manuscript and supplement in Nason et al., 2021, Neuron. The purpose of the study was to demonstrate the first-ever simultaneous brain-control of two independent groups of fingers in one hand with some analysis of cortical tuning to finger movements in nonhuman primates. This advises future brain-machine interfaces for the control of finger movements with humans. All of the data is contained in .mat files, which can be commonly opened by Matlab and the Python scipy library. The Matlab packages (and versions) used for the manuscript are: MATLAB (9.4), Signal Processing Toolbox (8.0), Statistics and Machine Learning Toolbox (11.3), and Curve Fitting Toolbox (3.5.7).
- Keyword:
- Brain-machine interface, Prosthesis, and Upper extremity
- Citation to related publication:
- Nason, S.R., Mender, M.J., Vaskov, A.K., Willsey, M.S., Ganesh Kumar, N., Kung, T.A., Patil, P.G., and Chestek, C.A. (2021). Real-Time Linear Prediction of Simultaneous and Independent Movements of Two Finger Groups Using an Intracortical Brain-Machine Interface. Neuron (accepted).
- Discipline:
- Engineering
-
- Creator:
- Mohtat, Peyman, Siegel, Jason B., Stefanopoulou, Anna G., and Lee, Suhak
- Description:
- The focus of this research effort is to systematically study the capability of aging diagnostics using cell expansion under variety of aging conditions and states. The data collection campaign is very important to cover various degradation modes to extract the degradation features that will be used to inform, parameterize, and validate the models developed earlier. In the data collection campaign, we are documenting the evolution of the electrical and mechanical characteristics and especially the reversible mechanical measurement. It is important to note that we collect data using newly developed fixtures that enables the simultaneous measurement of mechanical and electrical response under pseudo-constant pressure.
- Keyword:
- Lithium-ion batteries, Mechanical response, Aging, NMC, and Pouch cells
- Citation to related publication:
- Peyman Mohtat et al. (2021). Reversible and Irreversible Expansion of Lithium-ion Batteries Under a Wide Range of Stress Factors. J. Electrochem. Soc. 168 100520 https://doi.org/10.1149/1945-7111/ac2d3e
- Discipline:
- Engineering
-
- Creator:
- Revzen, Shai
- Description:
- This repository contains both the data and python3 code that reads this data and reproduces the relevant figures. The code depends on NumPy >1.17 and matplotlib >3.1 and was tested on python 3.8
- Keyword:
- locomotion, slipping, low Reynolds number, walking, and slithering
- Discipline:
- Science and Engineering
-
- Creator:
- Arthurs, Christopher J., Khlebnikov, Rostislav, Melville, Alexander, Marčan, Marija, Gomez, Alberto, Dillon-Murphy, Desmond, Cuomo, Federica, Vieira, Miguel, Schollenberger, Jonas, Lynch, Sabrina, Tossas-Betancourt, Christopher, Iyer, Kritika, Hopper, Sara, Livingston, Elizabeth, Youssefi, Pouya, Noorani, Alia, Ben Ahmed, Sabrina, Nauta, Foeke J.N., van Bakel, Theodorus M.J., Ahmed, Yunus, van Bakel, Petrus A.J., Mynard, Jonathan, Di Achille, Paolo, Gharahi, Hamid, Lau, Kevin D., Filonova, Vasilina, Aguirre, Miquel, Nama, Nitesh, Xiao, Nan, Baek, Seungik, Garikipati, Krishna, Sahni, Onkar, Nordsletten, David, and Figueroa, Carlos A.
- Description:
- This repository contains the source code for the CRIMSON GUI, as required in the PLOS Computational Biology publication: CRIMSON: An Open-Source Software Framework for Cardiovascular Integrated Modelling and Simulation by the same authors., This is a snapshot of the software; build dependencies can be found at https://doi.org/10.7302/ssj9-n788. Please visit https://github.com/carthurs/CRIMSONGUI/releases/tag/PLOS_Comp_Bio & www.crimson.software for more general information and the most up to date version of the software., and Software can be compiled in Windows.
- Keyword:
- Blood Flow Simulation, Patient-specific, Open-source Software, Image-based simulation, Cardiovascular Medical Image, Segmentation, and Finite Element Simulation
- Citation to related publication:
- CRIMSON: An Open-Source Software Framework for Cardiovascular Integrated Modelling and Simulation C.J. Arthurs, R. Khlebnikov, A. Melville, M. Marčan, A. Gomez, D. Dillon-Murphy, F. Cuomo, M.S. Vieira, J. Schollenberger, S.R. Lynch, C. Tossas-Betancourt, K. Iyer, S. Hopper, E. Livingston, P. Youssefi, A. Noorani, S. Ben Ahmed, F.J.H. Nauta, T.M.J. van Bakel, Y. Ahmed, P.A.J. van Bakel, J. Mynard, P. Di Achille, H. Gharahi, K. D. Lau, V. Filonova, M. Aguirre, N. Nama, N. Xiao, S. Baek, K. Garikipati, O. Sahni, D. Nordsletten, C.A. Figueroa bioRxiv 2020.10.14.339960; doi: https://doi.org/10.1101/2020.10.14.339960 and Computational Vascular Biomechanics Lab @ the University of Michigan and other collaborators, The Qt Company, NSIS Team and contributors, PostgreSQL Global Development Group, Oracle Corporation, Kitware. CRIMSON open source project - Build Dependencies [Data set], (2021). University of Michigan - Deep Blue. https://doi.org/10.7302/ssj9-n788
- Discipline:
- Health Sciences and Engineering
-
- Creator:
- Ramasubramani, Vyas
- Description:
- The goal of the work is to elucidate the stability of a complex experimentally observed structure of proteins. We found that supercharged GFP molecules spontaneously assemble into a complex 16-mer structure that we term a protomer, and that under the right conditions an even larger assembly is observed. The protomer structure is very well defined, and we performed simulations to try and understand the mechanics underlying its behavior. In particular, we focused on understanding the role of electrostatics in this system and how varying salt concentrations would alter the stability of the structure, with the ultimate goal of predicting the effects of various mutations on the stability of the structure. There are two separate projects included in this repository, but the two are closely linked. One, the candidate_structures folder, contains the atomistic outputs used to generate coarse-grained configurations. The actual coarse-grained simulations are in the rigid_protein folder, which pulls the atomistic coordinates from the other folder. All data is managed by signac and lives in the workspace directories, which contain various folders corresponding to different parameter combinations. The parameters associated with a given folder are stored in the signac_statepoint.json files within each subdirectory. The atomistic data uses experimentally determined protein structures as a starting point; all of these are stored in the ConfigFiles folder. The primary output is the topology files generated from the PDBs by GROMACS; these topologies are then used to parametrize the Monte Carlo simulations. In some cases, atomistic simulations were actually run as well, and the outputs are stored alongside the topology files. In the rigid_protein folder, the ConfigFiles folder contains MSMS, the software used to generate polyhedral representations of proteins from the PDBs in the candidate_structures folder. All of the actual polyhedral structures are also stored in the ConfigFiles folder. The actual simulation trajectories are stored as general simulation data (GSD) files within each subdirectory of the workspace, along with a single .pos file that contains the shape definition of the (nonconvex) polyhedron used to represent a protein. The logged quantities, such as energies and MC move sizes, are stored in .log files. The logic for the simulations in the candidate_structures project is in the Python scripts project.py, operations.py, and scripts/init.py. The rigid_protein folder also includes the notebooks directory, which contains Jupyter notebooks used to perform analyses, as well as the Python scripts used to actually perform the simulations and manage the data space. In particular, the project.py, operations.py and scripts/init.py scripts contain most of the logic associated with the simulations.
- Keyword:
- Protein assembly, Cryo TEM, Hierarchical Assembly, Monte Carlo simulation, and Coarse-grained simulation
- Discipline:
- Science and Engineering
-
- Creator:
- Reed, Matthew P., Boyle, K.
- Description:
- This is the first physical anthropomorphic test device to be based both on statistical body shape models as well as 3D printing.
- Keyword:
- Child Belt Fit Manikin
- Discipline:
- Engineering
-
- Creator:
- Isaacoff, Benjamin P., Li, Yilai, Lee, Stephen A., and Biteen, Julie S.
- Description:
- This is the experimental data referenced in our manuscript entitled “SMALL-LABS: An algorithm for measuring single molecule intensity and position in the presence of obscuring backgrounds .” These live-cell single-molecule imaging movies were used as a test of the SMALL-LABS single-molecule image analysis algorithm. The dataset comprises two movies; each one is provided both as a .tif stack and as an .avi file. The movie called “low_bg” has a standard low background, and the movie called “high_bg” includes a high fluorescent background produced by an external 488-nm laser.
- Keyword:
- single-molecule, microscopy, image analysis, mirobiology, and bacteria
- Citation to related publication:
- B.P. Isaacoff, Y. Li, S.A. Lee, J.S. Biteen, "SMALL-LABS: Measuring Single-Molecule Intensity and Position in Obscuring Backgrounds." Biophysical Journal, 975-982, 116, 2019. https://doi.org/10.1016/j.bpj.2019.02.006
- Discipline:
- Engineering and Science
-
- Creator:
- Mirshams Shahshahani, Payam
- Description:
- Investigating minimum human reaction times is often confounded by the motivation, training, and state of arousal of the subjects. We used the reaction times of athletes competing in the shorter sprint events in the Athletics competitions in recent Olympics (2004-2016) to determine minimum human reaction times because there's little question as to their motivation, training, or state of arousal. The reaction times of sprinters however are only available on the IAAF web page for each individual heat, in each event, at each Olympic. Therefore we compiled all these data into two separate excel sheets which can be used for further analyses.
- Keyword:
- minimum reaction time, sprinter, Olympics, Athletics, sex difference, starting block, and false start
- Citation to related publication:
- Mirshams Shahshahani P, Lipps DB, Galecki AT, Ashton-Miller JA (2018) On the apparent decrease in Olympic sprinter reaction times. PLoS ONE 13(6): e0198633. https://doi.org/10.1371/journal.pone.0198633
- Discipline:
- Engineering, Health Sciences, Science, Other, and General Information Sources
-
- Creator:
- Nguyen, Thanh H., Wright, Mason, Wellman, Michael P., and Singh, Satinder
- Description:
- In this work , we study the problem of allocating limited security countermeasures to protect network data from cyber-attacks, for scenarios modeled by Bayesian attack graphs. We consider multi-stage interactions between a network administrator and cybercriminals, formulated as a security game. We propose parameterized heuristic strategies for the attacker and defender and provide detailed analysis of their time complexity. Our heuristics exploit the topological structure of attack graphs and employ sampling methods to overcome the computational complexity in predicting opponent actions. Due to the complexity of the game, we employ a simulation-based approach and perform empirical game analysis over an enumerated set of heuristic strategies. Finally, we conduct experiments in various game settings to evaluate the performance of our heuristics in defending networks, in a manner that is robust to uncertainty about the security environment.
- Keyword:
- Empirical Game-Theoretic Analysis, Multi-stage Security Games, Attack Graph, Game Theory, and Moving Target Defense
- Discipline:
- Science and Engineering
-
- Creator:
- Moniri, Saman, Xiao, Xianghui, and Shahani, Ashwin J.
- Description:
- The data file is comprised of 22,500 X-ray projections (15 scans of 1500 projections each) recorded during solidification of Al-Ge-Na. The raw data file is in .hdf format and can be reconstructed into .tiff, e.g., by using the TomoPy toolbox in Python.
- Keyword:
- X-ray microtomography, synchrotron, in situ, 4D materials science, irregular eutectic, growth, and solidification
- Citation to related publication:
- Moniri, S., Xiao, X., & Shahani, A. J. (2019). The mechanism of eutectic modification by trace impurities. Scientific Reports, 9(1), 3381. https://doi.org/10.1038/s41598-019-40455-3
- Discipline:
- Engineering
-
- Creator:
- Gliske, Stephen V and Stacey, William C
- Description:
- This data is part of a large program to translate detection and interpretation of HFOs into clinical use. A zip file is included which contains hfo detections, metadata, and Matlab scripts. The matlab scripts analyze this input data and produce figures as in the referenced paper (note: the blind source separation method is stochastic, and so the figures may not be exactly the same). A file "README.txt" provides more detail about each individual file within the zip file.
- Keyword:
- hfo, high frequency oscillation, ripple, fast ripple, blind source separation, non-negative matrix factorization, and temporal variability
- Discipline:
- Science, Engineering, and Health Sciences
-
- Creator:
- Carlevaris-Bianco, Nicholas , Ushani, Arash , and Eustice, Ryan
- Description:
- This is a large scale, long-term autonomy dataset for robotics research collected on the University of Michigan’s North Campus. The dataset consists of omnidirectional imagery, 3D lidar, planar lidar, GPS, and proprioceptive sensors for odometry collected using a Segway robot. The dataset was collected to facilitate research focusing on longterm autonomous operation in changing environments. The dataset is comprised of 27 sessions spaced approximately biweekly over the course of 15 months. The sessions repeatedly explore the campus, both indoors and outdoors, on varying trajectories, and at different times of the day across all four seasons. This allows the dataset to capture many challenging elements including: moving obstacles (e.g., pedestrians, bicyclists, and cars), changing lighting, varying viewpoint, seasonal and weather changes (e.g., falling leaves and snow), and long-term structural changes caused by construction projects. To further facilitate research, we also provide ground-truth pose for all sessions in a single frame of reference. and A detailed description of the dataset and the methods used to generate it is in the document nclt.pdf. If you use this dataset in your research please cite: Carlevaris-Bianco, N., Ushani, A., Eustice, R. (2021). The University of Michigan North Campus Long-Term Vision and LIDAR Dataset [Data set]. University of Michigan - Deep Blue. https://doi.org/10.7302/7rnm-6a03
- Keyword:
- Long-term SLAM, place recognition, lidar, computer vision, and field and service robotics
- Citation to related publication:
- Carlevaris-Bianco, Nicholas, et al. “University of Michigan North Campus Long-Term Vision and Lidar Dataset.” The International Journal of Robotics Research, vol. 35, no. 9, Aug. 2016, pp. 1023–1035, doi:10.1177/0278364915614638.
- Discipline:
- Engineering
-
- Creator:
- Regoli, Leonardo H.
- Description:
- The data contained in the file comprises those collected during the characterization of the sensor as described in the article "Investigation of a low-cost magneto-inductive magnetometer for space science applications" (cited below). This includes:, Resolution , Stability , Linearity , and Frequency response
- Keyword:
- magnetometer, magnetic fields, CubeSat, and geomagnetic activity
- Discipline:
- Engineering
-
- Creator:
- Sick, Volker , Reuss, David L, and Greene, Mark L
- Description:
- This archive contains data files from spark-ignited homogeneous combustion internal combustion engine experiments. Included are high-resolution two-dimensional two-component velocity fields acquired at two 5 x 6 mm regions, one near the head and one near the piston. Crank angle resolved heat flux measurements were made at a third location in the head. The engine was operated at 40 kPa, 500 and 1300 RPM, motor and fired. Included are in-cylinder pressure measurements, external pressure and temperature data, as well as details on the geometry of the optical engine to enable setups of simulation configurations.
- Keyword:
- combustion, internal combustion engine, heat Transfer, particle image velocimetry, in-cylinder flow, TCC III engine , optical engine, CFD validation, PIV, boundary layer, and turbulence
- Discipline:
- Engineering
-
- Creator:
- Fries, Kevin J
- Description:
- This data is in support of the publication in review "Using sensor data to dynamically map large-scale models to site-scale forecasts: A case study using the National Water Model". It is all the raw data extracted from the NWM flow forecasts for Iowa and the IFIS stage readings. For the NWM data, each date has it's own tab-delimited file with columns being the time (hrs) and rows being the NHD site. For the IFIS gages, each tab delimited file is for a single site for the period of record.
- Keyword:
- student-friendly
- Discipline:
- Engineering
-
- Creator:
- Mathews, Elizabeth and Verhoff, Frank
- Description:
- Each pdf is an electronic version of the paper output for each experiment. Each text file is the electronic version of the data on the computer cards for each experiment. These text files are directly readable by Excel. Once in Excel, the data can be manipulated as desired. Additional information is in the theses.
- Keyword:
- Two Liquid Phase Processes, Droplet Size and Concentration, Population Balances, and Dispersed Phase Mixing
- Discipline:
- Science and Engineering
-
- Creator:
- Mathieu, Johanna L, Balzano, Laura, and Ledva, Gregory S
- Description:
- This data set contains the relevant time series for constructing and testing electricity load models within the related paper. The files within are a '.mat' file that contains the data and a 'readme.txt' file detailing the contents of the data.
- Keyword:
- Output feedback, Online learning, Machine learning, Real-time filtering, and Energy disaggregation
- Discipline:
- Engineering
-
- Creator:
- Schiffmann, Philipp, Sick, Volker, and Reuss, David L
- Description:
- This archive contains data files from spark-ignited homogenous combustion internal combustion engine experiments. Included are two-dimensional two-component velocity fields from various measurement planes with maximized field of view, in-cylinder pressure measurements, external pressure and temperature data, as well as details on the geometry of the optical engine to enable setups of simulation configurations. Fired operation was with stoichiometric propane air, 40kPa MAP, at 1300 RPM.
- Keyword:
- TCC III engine, internal combustion engine, particle image velocimetry, in-cylinder flow, turbulence in engines, CFD validation data, cyclic variability, optical engine, combustion variability, and PIV
- Citation to related publication:
- dx.doi.org/10.1177/1468087417720558
- Discipline:
- Engineering
-
- Creator:
- Schiffmann, Philipp, Sick, Volker, and Reuss, David L
- Description:
- This archive contains data files from spark-ignited homogenous combustion internal combustion engine experiments. Included are two-dimensional two-component velocity fields acquired in a small, high-resolution field of view near the spark plug, and images of hydroxyl radical chemiluminescence recording the early flame-kernel growth. Included are in-cylinder pressure measurements, external pressure and temperature data, as well as details on the geometry of the optical engine to enable setups of simulation configurations. Included are tables of one-per-cycle parameters for each test with methane or propane at stoichiometric, dilute limit, lean limit, and rich limit, operation conducted at 40kPa and 1300 RPM.
- Keyword:
- OH* imaging, TCC III engine, internal combustion engine, particle image velocimetry, in-cylinder flow, turbulence in engines, CFD validation data, cyclic variability, early flame kernel growth, optical engine, combustion variability, ignition, and PIV
- Citation to related publication:
- dx.doi.org/10.1177/1468087417720558
- Discipline:
- Engineering
- « Previous
- Next »
- 1
- 2
- 3
- 4