Search Constraints
Number of results to display per page
View results as:
Search Results
-
- Creator:
- Wang, Yeqing, Gao, Jianrong, Ren, Yang, De Andrade, Vincent, and Shahani, Ashwin J
- Description:
- The data file contains (1) the grayscale images of the nano-tomography experiments that can be segmented into binary images and visualized to show the 3D morphology of three-phase spiral eutectics; and (2) Scanning electron micro of solidified sample.
- Keyword:
- Zinc alloys, spiral structure, thermodynamic calculations, synchrotron X-ray diffraction, and synchrotron X-ray nano-tomography
- Discipline:
- Engineering
-
- Creator:
- Whitaker, Steven T., Nataraj, Gopal, Nielsen, Jon-Fredrik, and Fessler, Jeffrey A.
- Description:
- File: P,jf06Sep2019,mese.7 The multi-echo spin echo (MESE) data was acquired using a 3D acquisition with an initial 90 degree excitation pulse followed by 32 refocusing (180 degree) pulses, resulting in 32 echoes with echo spacing of 10 ms. The repetition time of the sequence was 1200 ms. Each refocusing pulse was flanked by crusher gradients to impart 14 cycles of phase across the imaging volume. The initial excitation pulse had time-bandwidth product of 6, duration of 3 ms, and slab thickness of 0.9 cm, and each refocusing pulse had time-bandwidth product of 2, duration of 2 ms, and slab thickness of 2.1 cm. The scan took 36 min 11 s and covered a field of view (FOV) of 22 x 22 x 0.99 cm^3 with matrix size 200 x 200 x 9., File: P,jf06Sep2019,b1.7 The Bloch-Siegert (BS) scans were acquired using a 3D acquisition. The excitation pulse of these scans had time-bandwidth product of 8 and duration of 1 ms. The pair of scans used +/-4 kHz off-resonant Fermi pulses between excitation and readout. The BS scans took 2 min 40 s in total and covered a FOV of 22 x 22 x 0.99 cm^3 with matrix size 200 x 50 x 9., File: P,jf06Sep2019,mwf.7 The small-tip fast recovery (STFR) scans were acquired using a 3D acquisition. The first two and last two scans were pairs of spoiled gradient-recalled echo (SPGR) scans with echo time difference of 2.3 ms. (In the related paper, only the first set was used, i.e., only 11 of the 13 scans were used.) The remaining scans used scan parameters that were optimized to minimize the Cramer-Rao Lower Bound (CRLB) of estimates of myelin water fraction (MWF). The RF pulses had time-bandwidth product of 8 and duration of 1 ms. Each pair of SPGR scans took 58 s and the nine STFR scans took 3 min 36 s for a total scan time of 5 min 32 s (4 min 34 s if one pair of SPGR scans is ignored). The scans covered a field of view (FOV) of 22 x 22 x 0.99 cm^3 with matrix size 200 x 200 x 9., File: meseslice5.mat Contains the 32 echoes of the MESE image data for the middle slice of the imaging volume. Saved using Mathworks MATLAB R2019a., File: b1slice5.mat Contains the transmit field inhomogeneity map for the middle slice of the imaging volume., File: recon.jld Key "img" contains the 11 STFR images for the middle slice of the imaging volume. Key "b0map" contains a field map estimated from the two SPGR scans. Key "mask" contains a mask of the voxels for which to estimate MWF. Key "T1img" contains a T1-weighted image for anatomical reference., File: headmask.mat Contains a mask for visualizing just the brain (ignores the skull) for the middle slice of the imaging volume., File: rois.mat Contains masks for various regions of interest (ROIs), used for computing statistics. Keys "mtopleft", "mtopright", "mbottomleft", and "mbottomright" refer to the corresponding locations on the anatomical reference image (see related paper). Key "mic" refers to the internal capsules, and key "mgm" refers to a gray matter ROI., The raw data files (P-files) can be read into the Julia programming language using the Julia version of the Michigan Image Reconstruction Toolbox ( https://github.com/JeffFessler/MIRT.jl) or into MATLAB using TOPPE ( https://github.com/toppeMRI/toppe). The reconstructed slices used in the related paper are provided for convenience, and are stored in .mat files that can be loaded into Julia (using the package MAT.jl) or MATLAB, and a .jld file that can be loaded into Julia (using the package JLD.jl). The Julia code for processing the data to create MWF maps is hosted publicly on GitHub at https://github.com/StevenWhitaker/STFR-MWF., and Files: toppe-master.zip and MIRT.jl-master.zip are archived versions of the TOPPE and Michigan Image Reconstruction Toolbox code sets from GitHub as of 2/28/2020.
- Keyword:
- myelin, machine learning, kernel learning, magnetic resonance imaging, and scan design
- Citation to related publication:
- Whitaker, S. T., Nataraj, G., Nielsen, J.-F., & Fessler, J. A. (2020). Myelin water fraction estimation using small-tip fast recovery MRI. Magnetic Resonance in Medicine, 84(4), 1977–1990. https://doi.org/10.1002/mrm.28259
- Discipline:
- Health Sciences and Engineering
-
- Creator:
- van Velden, Grace and Reddy, Raghav
- Description:
- A household survey was developed to capture household perceptions and behaviors around drinking water use. It consisted of several modules: key informant and household demographics, household assets and consumption, water use behaviors in the dry season, water use behaviors during the rest of the year, and water supply maintenance and repair. Intervention and safe water device surveys were also developed; the household and intervention surveys were administered via Qualtrics. and This record consists of several survey instruments, exported where appropriate from Qualtrics into PDF and .qsf.
- Keyword:
- Bangladesh, arsenic, sustainability, survey
- Discipline:
- Engineering
-
- Creator:
- Huffaker, Jordan S., Kummerfeld, Jonathan K., Lasecki, Walter S., and Ackerman, Mark S.
- Description:
- The following files include supplementary materials for our CHI 2020 paper "Crowdsourced Detection of Emotionally Manipulative Language". Namely, these materials include the dataset that was used in the evaluation. See the paper for more details.
- Keyword:
- Crowdsourcing, Media Manipulation, Rhetoric, and Emotion
- Citation to related publication:
- J.S. Huffaker, J.K. Kummerfeld, W.S. Lasecki, M.S. Ackerman. Crowdsourced Detection of Emotionally Manipulative Language. In Proceedings of the ACM Conference on Human Factors in Computing Systems (CHI 2020). Honolulu, HI. 2020.
- Discipline:
- Engineering
-
- Creator:
- Moniri, Saman, Bale, Hrishikesh , Volkenandt, Tobias, Wang, Yeqing, Gao, Jianrong, Lu, Tianxian, Sun, Kai, and Shahani, Ashwin J.
- Description:
- The data file contains (1) the grayscale images of the nano-tomography experiments that can be segmented into binary images and visualized to show the 3D morphology of spiral eutectics; and (2) crystallographic orientation maps of serial-sectioned sample, which can be processed in a variety of EBSD software packages.
- Keyword:
- crystallization, chirality, self-organization, and spiral eutectics
- Citation to related publication:
- Moniri, S., Bale, H., Volkenandt, T., Wang, Y., Gao, J., Lu, T., Sun, K., Ritchie, R.O., & Shahani, A.J. (23 January 2020). Multi‐Step Crystallization of Self‐Organized Spiral Eutectics. Small (1906146). https://doi.org/10.1002/smll.201906146
- Discipline:
- Engineering
-
- Creator:
- Ahluwalia, Vinayak S., Steimle, Lauren N., and Denton, Brian T.
- Description:
- This repository includes test instances of infinite-horizon Markov decision processes with multiple models of parameters (i.e., "Multi-model Markov decision processes"). We generated each test instance in the dataset using a Python script. The test instances can be read in using the provided C++ and Python script. See the README for details.
- Keyword:
- Markov decision processes, mixed-integer programming, stochastic programming, and dynamic programming
- Citation to related publication:
- Ahluwalia, Steimle, and Denton. "Policy-based branch-and-bound for infinite-horizon Multi-model Markov decision processes". 2020.
- Discipline:
- Engineering
-
- Creator:
- Hegedus, Alexander M
- Description:
- This is the README for the LunarSynchrotronArray package, maintained by Dr. Alex Hegedus alexhege@umich.edu This code repository corresponds to the Hegedus et al. 2020 (accepted) Radio Science paper, "Measuring the Earth's Synchrotron Emission from Radiation Belts with a Lunar Near Side Radio Array". The arxiv link for the paper is https://arxiv.org/abs/1912.04482. The DOI link is https://doi.org/10.1029/2019RS006891 , The Earth's Ionosphere is home to a large population of energetic electrons that live in the balance of many factors including input from the Solar wind, and the influence of the Earth's magnetic field. These energetic electrons emit radio waves as they traverse Earth's magnetosphere, leading to short‐lived, strong radio emissions from local regions, as well as persistent weaker emissions that act as a global signature of the population breakdown of all the energetic electrons. Characterizing this weaker emission (Synchrotron Emission) would lead to a greater understanding of the energetic electron populations on a day to day level. A radio array on the near side of the Moon would always be facing the Earth, and would well suited for measuring its low frequency radio emissions. In this work we simulate such a radio array on the lunar near side, to image this weaker synchrotron emission. The specific geometry and location of the test array were made using the most recent lunar maps made by the Lunar Reconnaissance Orbiter. This array would give us unprecedented day to day knowledge of the electron environment around our planet, providing reports of Earth's strong and weak radio emissions, giving both local and global information. , This set of codes should guide you through making the figures in the paper, as well as hopefully being accessible enough for changing the code for your own array. I would encourage you to please reach out to collaborate if that is the case! Requirements: , and CASA 4.7.1 (or greater?) built on python 2.7 Example link for Red Hat 7 https://casa.nrao.edu/download/distro/casa/release/el7/casa-release-4.7.1-el7.tar.gz Users may follow this guide to download and install the correct version of CASA for their system https://casa.nrao.edu/casadocs/casa-5.5.0/introduction/obtaining-and-installing CASA executables should be fairly straightforward to extract from the untarred files. gcc 4.8.5 or above (or below?) GCC installation instructions can be found here: https://gcc.gnu.org/install/ SPICE (I use cspice here) https://naif.jpl.nasa.gov/naif/toolkit_C.html As seen in lunar_furnsh.txt which loads the SPICE kernels, you also must download KERNELS_TO_LOAD = ( '/home/alexhege/SPICE/LunarEph/moon_pa_de421_1900-2050.bpc' '/home/alexhege/SPICE/LunarEph/moon_080317.tf' '/home/alexhege/SPICE/LunarEph/moon_assoc_me.tf' '/home/alexhege/SPICE/LunarEph/pck00010.tpc' '/home/alexhege/SPICE/LunarEph/naif0008.tls' '/home/alexhege/SPICE/LunarEph/de430.bsp' ) All of which can be found at https://naif.jpl.nasa.gov/pub/naif/generic_kernels/ SLDEM2015_128_60S_60N_000_360_FLOAT.IMG for the lunar surface data by LRO LOLA found at http://imbrium.mit.edu/DATA/SLDEM2015/GLOBAL/FLOAT_IMG/
- Citation to related publication:
- Hegedus, A., Nenon, Q., Brunet, A., Kasper, J., Sicard, A., Cecconi, B., MacDowall, R., & Baker, D. (2019). Measuring the Earth's Synchrotron Emission from Radiation Belts with a Lunar Near Side Radio Array. https://arxiv.org/abs/1912.04482 and Hegedus, A., Nenon, Q., Brunet, A., Kasper, J., Sicard, A., Cecconi, B., MacDowall, R., & Baker, D. (2020). Radio Science. https://doi.org/10.1029/2019RS006891
- Discipline:
- Engineering and Science
-
- Creator:
- Smith, Joeseph P., Gronewold, Andrew D., Read, Laura, Crooks, James L., School for Environment and Sustainability, University of Michigan, Department of Civil and Environmental Engineering, University of Michigan, and Cooperative Institute for Great Lakes Research
- Description:
- Using the statistical programming package R ( https://cran.r-project.org/), and JAGS (Just Another Gibbs Sampler, http://mcmc-jags.sourceforge.net/), we processed multiple estimates of the Laurentian Great Lakes water balance components -- over-lake precipitation, evaporation, lateral tributary runoff, connecting channel flows, and diversions -- feeding them into prior distributions (using data from 1950 through 1979), and likelihood functions. The Bayesian Network is coded in the BUGS language. Water balance computations assume that monthly change in storage for a given lake is the difference between beginning of month water levels surrounding each month. For example, the change in storage for June 2015 is the difference between the beginning of month water level for July 2015 and that for June 2015., More details on the model can be found in the following summary report for the International Watersheds Initiative of the International Joint Commission, where the model was used to generate a new water balance historical record from 1950 through 2015: https://www.glerl.noaa.gov/pubs/fulltext/2018/20180021.pdf. Large Lake Statistical Water Balance Model (L2SWBM): https://www.glerl.noaa.gov/data/WaterBalanceModel/, and This data set has a shorter timespan to accommodate a prior which uses data not used in the likelihood functions.
- Keyword:
- Water, Balance, Great Lakes, Laurentian, Machine, Learning, Lakes, Bayesian, and Network
- Citation to related publication:
- Smith, J., Gronewald, A. et al. Summary Report: Development of the Large Lake Statistical Water Balance Model for Constructing a New Historical Record of the Great Lakes Water Balance. Submitted to: The International Watersheds Initiative of the International Joint Commission. Accessible at https://www.glerl.noaa.gov/pubs/fulltext/2018/20180021.pdf, Large Lake Statistical Water Balance Model (L2SWBM). https://www.glerl.noaa.gov/data/WaterBalanceModel/, and Gronewold, A.D., Smith, J.P., Read, L. and Crooks, J.L., 2020. Reconciling the water balance of large lake systems. Advances in Water Resources, p.103505.
- Discipline:
- Science and Engineering
-
- Creator:
- Smith, Joeseph P., Gronewold, Andrew D., Read, Laura, Crooks, James L., School for Environment and Sustainability, University of Michigan, Department of Civil and Environmental Engineering, University of Michigan, and Cooperative Institute for Great Lakes Research
- Description:
- Using the statistical programming package R ( https://cran.r-project.org/), and JAGS (Just Another Gibbs Sampler, http://mcmc-jags.sourceforge.net/), we processed multiple estimates of the Laurentian Great Lakes water balance components -- over-lake precipitation, evaporation, lateral tributary runoff, connecting channel flows, and diversions -- feeding them into prior distributions (using data from 1950 through 1979), and likelihood functions. The Bayesian Network is coded in the BUGS language. Water balance computations assume that monthly change in storage for a given lake is the difference between beginning of month water levels surrounding each month. For example, the change in storage for June 2015 is the difference between the beginning of month water level for July 2015 and that for June 2015., More details on the model can be found in the following summary report for the International Watersheds Initiative of the International Joint Commission, where the model was used to generate a new water balance historical record from 1950 through 2015: https://www.glerl.noaa.gov/pubs/fulltext/2018/20180021.pdf. Large Lake Statistical Water Balance Model (L2SWBM): https://www.glerl.noaa.gov/data/WaterBalanceModel/ , and This data set has a shorter timespan to accommodate a prior which uses data not used in the likelihood functions.
- Keyword:
- Water, Balance, Great Lakes, Laurentian, Machine, Learning, Lakes, Bayesian, and Network
- Citation to related publication:
- Smith, J., Gronewald, A. et al. Summary Report: Development of the Large Lake Statistical Water Balance Model for Constructing a New Historical Record of the Great Lakes Water Balance. Submitted to: The International Watersheds Initiative of the International Joint Commission. Accessible at https://www.glerl.noaa.gov/pubs/fulltext/2018/20180021.pdf, Large Lake Statistical Water Balance Model (L2SWBM). https://www.glerl.noaa.gov/data/WaterBalanceModel/, and Gronewold, A.D., Smith, J.P., Read, L. and Crooks, J.L., 2020. Reconciling the water balance of large lake systems. Advances in Water Resources, p.103505.
- Discipline:
- Science and Engineering
-
- Creator:
- Holmes, Patrick
- Description:
- This work was collected to evaluate Stability Basins for characterizing the limits of human stability during Sit-to-Stand. and MATLAB code was used to process the data into individual trials. Trials are labeled by Sit-to-Stand type (Natural, Momentum-Transfer, or Quasi-Static) and experimental condition. MATLAB code for analyzing the data and computing Stability Basins is provided. A GUI is provided to animate a subject's movement and display projections of the Stability Basins in the horizontal and vertical planes.
- Keyword:
- biomechanics, mathematical model, locomotion, fall risk, reachability, and feedback control
- Citation to related publication:
- https://arxiv.org/abs/1908.01876 and Holmes, P. D., Danforth, S. M., Fu, X.-Y., Moore, T. Y., & Vasudevan, R. (n.d.). Characterizing the limits of human stability during motion: Perturbative experiment validates a model-based approach for the Sit-to-Stand task. Royal Society Open Science, 7(1), 191410. https://doi.org/10.1098/rsos.191410
- Discipline:
- Engineering
-
- Creator:
- Smith, Joeseph P., Gronewold, Andrew D., Read, Laura, Crooks, James L., School for Environment and Sustainability, University of Michigan, Department of Civil and Environmental Engineering, University of Michigan, and Cooperative Institute for Great Lakes Research, University of Michigan
- Description:
- Using the statistical programming package R ( https://cran.r-project.org/), and JAGS (Just Another Gibbs Sampler, http://mcmc-jags.sourceforge.net/), we processed multiple estimates of the Laurentian Great Lakes water balance components -- over-lake precipitation, evaporation, lateral tributary runoff, connecting channel flows, and diversions -- feeding them into prior distributions (using data from 1950 through 1979), and likelihood functions. The Bayesian Network is coded in the BUGS language. Water balance computations assume that monthly change in storage for a given lake is the difference between beginning of month water levels surrounding each month. For example, the change in storage for June 2015 is the difference between the beginning of month water level for July 2015 and that for June 2015., More details on the model can be found in the following summary report for the International Watersheds Initiative of the International Joint Commission, where the model was used to generate a new water balance historical record from 1950 through 2015: https://www.glerl.noaa.gov/pubs/fulltext/2018/20180021.pdf. Large Lake Statistical Water Balance Model (L2SWBM): https://www.glerl.noaa.gov/data/WaterBalanceModel/, and This data set has a shorter timespan to accommodate a prior which uses data not used in the likelihood functions.
- Keyword:
- Water, Balance, Great Lakes, Laurentian, Machine Learning, Machine, Learning, Lakes, Bayesian, and Network
- Citation to related publication:
- Smith, J., Gronewald, A. et al. Summary Report: Development of the Large Lake Statistical Water Balance Model for Constructing a New Historical Record of the Great Lakes Water Balance. Submitted to: The International Watersheds Initiative of the International Joint Commission. Accessible at https://www.glerl.noaa.gov/pubs/fulltext/2018/20180021.pdf, Large Lake Statistical Water Balance Model (L2SWBM). https://www.glerl.noaa.gov/data/WaterBalanceModel/, and Gronewold, A.D., Smith, J.P., Read, L. and Crooks, J.L., 2020. Reconciling the water balance of large lake systems. Advances in Water Resources, p.103505.
- Discipline:
- Science and Engineering
-
- Creator:
- Bougher, S. W. (CLaSP Department, U. of Michigan), Roeten, K. J. (CLaSP Department, U. of Michigan), and Sharrar, R. (Astronomy Department, U. of Michigan)
- Description:
- The NASA MAVEN (Mars Atmosphere and Volatile Evolution) spacecraft, which is currently in orbit around Mars, has been taking daily (systematic) measurements of the densities and temperatures in the upper atmosphere of Mars between about 140 to 240 km above the surface. Wind measurement campaigns are also conducted once per month for 5-10 orbits. These densities, temperatures and winds change with time (e.g. season, local time) and location, and sometimes fluctuate quickly. Global dust storm events are also known to significantly impact these density, temperature and wind fields in the Mars thermosphere. Such global dust storm period measurements can be compared to simulations from a computer model of the Mars atmosphere called M-GITM (Mars Global Ionosphere-Thermosphere Model), developed at U. of Michigan. This is the first detailed comparison between direct global dust storm period measurements in the upper atmosphere of Mars and simulated MGITM fields and is important because it can help to inform us what physical processes are acting on the upper atmosphere during such large dust events. Since the global circulation plays a role in the structure, variability, and evolution of the atmosphere, understanding the processes that drive the winds in the upper atmosphere of Mars also provides key context for understanding how the atmosphere behaves as a whole system. A basic version of the M-GITM code can be found on Github as follows: https:/github.com/dpawlows/MGITM and About 4 months of Neutral Gas and Ion Mass Spectrometer (NGIMS) measurements of densities and winds have been made by the MAVEN team during the summer of 2018 (Elrod et al., 2019). Nine reference measurement intervals during this global dust storm (1-June through 30-August 2018) are selected for detailed study (Elrod et al. 2019). The Mars conditions for these nine intervals have been used to launch corresponding M-GITM code simulations, yielding 3-D neutral density, temperature and wind fields for comparison to these NGIMS measurements. The M-GITM datacubes used to extract the density, temperature and neutral winds, along the trajectory of each orbit path between 140 and 240 km, are provided in this Deep Blue Data archive. README files are provided for each datacube, detailing the contents of each file. A general README file is also provided that summarizes the inputs and outputs of the M-GITM code simulations for this study.
- Keyword:
- Mars, MAVEN Spacecraft, Mars Thermosphere, and Mars Global Dust Storm of 2018
- Citation to related publication:
- Elrod, M. K., S. W. Bougher, K. Roeten, R. Sharrar, J. Murphy, Structural and Compositional Changes in the Upper Atmosphere related to the PEDE-2018 Dust Event on Mars as Observed by MAVEN NGIMS, Geophys. Res. Lett., (2019). doi: 10.1029/2019GL084378. and Jain, S. K., Bougher, S. W., Deighan, J., Schneider, N. M., Gonzalez‐Galindo, F., Stewart, A. I. F., et al. ( 2020). Martian thermospheric warming associated with the Planet Encircling Dust Event of 2018. Geophysical Research Letters, 47, e2019GL085302. https://doi.org/10.1029/2019GL085302
- Discipline:
- Engineering and Science
-
- Creator:
- Baskar, Deepika and Gorodetsky, Alex
- Description:
- Studying the effect of wind on urban air mobility typically requires comprehensive fluid dynamics simulations in a realistic urban geometry. Motivated to enable wide-spread autonomous drone activity in urban centers, such studies have indeed been considered by several authors in the recent literature. However, the accessibility of these approaches to those with less fluid dynamics experience and/or without access to purpose built simulation tools has limited validation and application of the resulting path planning strategies. and The .dat files contain the flow variables for each of the 402240 points sampled from the region under study. For flow visualization purposes, the .dat files are readable using Tecplot Software.
- Keyword:
- UAM, Energy efficient path planning , CFD, and City of Boston
- Citation to related publication:
- Baskar, D., & Gorodetsky, A. (2020). A Simulated Wind-field Dataset for Testing Energy Efficient Path-Planning Algorithms for UAVs in Urban Environment. In AIAA AVIATION 2020 FORUM. American Institute of Aeronautics and Astronautics. https://doi.org/10.2514/6.2020-2920
- Discipline:
- Other and Engineering
-
- Creator:
- Chen, Yang and Manchester, Ward IV
- Description:
- GOES_flare_list: contains a list of more than 10,000 flare events. The list has 6 columns, flare classification, active region number, date, start time end time, emission peak time, GOES_B_flare_list: contains time series data of SDO/HMI SHARP parameters for B class solar flares , GOES_MX_flare_list: contains time series data of SDO/HMI SHARP parameters for M and X class solar flares, SHARP_B_flare_data_300.hdf5 and SHARP_MX_flare_data_300.hdf5 files contain time series more than 20 physical variables derived from the SDO/HMI SHARP data files. These data are saved at a 12 minute cadence and are used to train the LSTM model., and B_HARPs_CNNencoded_part_xxx.hdf5 and M_X HARPs_CNNencoded_part_xxx.hdf5 include neural network encoded features derived from vector magnetogram images derived from the Solar Dynamics Observatory (SDO) Helioseismic and Magnetic Imager (HMI). These data files typically contains one or two sequences of magnetograms covering an active region for a period of 24h with a 1 hour cadence. We encode each magnetogram with frames of a fixed size of 8x16 with 512 channels.
- Keyword:
- machine learning, data science, and solar flare prediction
- Citation to related publication:
- Chen, Y., Manchester, W., Hero, A., Toth, G., DuFumier, B. Zhou, T., Wang, X., Zhu, H., Sun, Zeyu, Gombosi, T., Identifying Solar Flare Precursors Using Time Series of SDO/HMI Images and SHARP Parameters, Space Weather, 17, 1404–1426. https://doi.org/10.1029/2019SW002214 and Jiao, Z., Chen, Y., Manchester, W. (2020). Data for Solar Flare Intensity Prediction with Machine Learning Models [Data set]. University of Michigan - Deep Blue. https://doi.org/10.7302/b07j-bj08
- Discipline:
- Engineering and Science
-
- Creator:
- Hall, Ryan J. and Larson, Ronald G.
- Description:
- This is data is a large assortment of over 50 1,4-polybutadiene star-linear blends that can be used for assessing and developing predictive models. The data are presented in CSV files.
- Keyword:
- polymers, rheology, star-linear polymer blends, and shear rheology
- Citation to related publication:
- Hall, R., Desai, P. S., Kang, B.-G., Huang, Q., Lee, S., Chang, T., Venerus, D. C., Mays, J., Ntetsikas, K., Polymeropoulos, G., Hadjichristidis, N., & Larson, R. G. (2019). Assessing the Range of Validity of Current Tube Models through Analysis of a Comprehensive Set of Star–Linear 1,4-Polybutadiene Polymer Blends. Macromolecules, 52(20), 7831–7846. https://doi.org/10.1021/acs.macromol.9b00642
- Discipline:
- Science and Engineering
-
- Creator:
- Burgin, Tucker and Mayes, Heather B.
- Description:
- This project aimed to discover and analyze the molecular mechanism of synthesis of two particular fucosylated oligosaccharide products in a mutant enzyme, Thermatoga maratima Alpha-L-Fucosidase D224G, whose wild type performs the opposite reaction (cleavage of fucosyl glycosidic bonds). Discovery of the mechanism was performed using an unbiased simulations method known as aimless shooting, whereas analysis of the mechanism in terms of the energy profile was performed using a separate method known as equilibrium path sampling. The data here concerns the latter method. and The contents of the atesa_master.zip are the ATESA GitHub project. A Python program for automating transition path sampling with aimless shooting using Amber. https://github.com/team-mayes/atesa
- Keyword:
- Equilibrium Path Sampling, Transition Path Sampling, Enzymatic Mechanism, and GH29
- Citation to related publication:
- Burgin, T., & Mayes, H. B. (2019). Mechanism of oligosaccharide synthesis via a mutant GH29 fucosidase. Reaction Chemistry & Engineering, 4(2), 402–409. https://doi.org/10.1039/C8RE00240A
- Discipline:
- Engineering
-
- Creator:
- Bowen Li, Yiling Zhang, Siqian Shen, and Johanna Mathieu
- Description:
- The project outputs summarize all the publications, talks, and codes we accomplished under this NSF funding. In the project, we develop methodologies to manage uncertainty in future electric power systems and quantify how uncertainty affects power system sustainability. and Talks, papers, and poster in Deep Blue: http://hdl.handle.net/2027.42/149653
- Keyword:
- chance constraint, distributionally robust optimization, optimal power flow, demand response, and unimodality
- Citation to related publication:
- B. Li and J. L. Mathieu, "Analytical reformulation of chance-constrained optimal power flow with uncertain load control," 2015 IEEE Eindhoven PowerTech, Eindhoven, 2015, pp. 1-6. https://doi.org/10.1109/PTC.2015.7232803, B. Li, J. L. Mathieu and R. Jiang, "Distributionally Robust Chance Constrained Optimal Power Flow Assuming Log-Concave Distributions," 2018 Power Systems Computation Conference (PSCC), Dublin, 2018, pp. 1-7. https://doi.org/10.23919/PSCC.2018.8442927, B. Li, M. Vrakopoulou and J. L. Mathieu, "Chance Constrained Reserve Scheduling Using Uncertain Controllable Loads Part II: Analytical Reformulation," in IEEE Transactions on Smart Grid, vol. 10, no. 2, pp. 1618-1625, March 2019. https://doi.org/10.1109/TSG.2017.2773603, B. Li, R. Jiang and J. L. Mathieu, "Distributionally Robust Chance-Constrained Optimal Power Flow Assuming Unimodal Distributions With Misspecified Modes," in IEEE Transactions on Control of Network Systems, vol. 6, no. 3, pp. 1223-1234, Sept. 2019. https://doi.org/10.1109/TCNS.2019.2930872, B. Li, R. Jiang and J. L. Mathieu, "Distributionally robust risk-constrained optimal power flow using moment and unimodality information," 2016 IEEE 55th Conference on Decision and Control (CDC), Las Vegas, NV, 2016, pp. 2425-2430. https://doi.org/10.1109/CDC.2016.7798625, B. Li, S. D. Maroukis, Y. Lin and J. L. Mathieu, "Impact of uncertainty from load-based reserves and renewables on dispatch costs and emissions," 2016 North American Power Symposium (NAPS), Denver, CO, 2016, pp. 1-6. https://doi.org/10.1109/NAPS.2016.7747830, G. Martínez, J. Liu, B. Li, J. L. Mathieu and C. L. Anderson, "Enabling renewable resource integration: The balance between robustness and flexibility," 2015 53rd Annual Allerton Conference on Communication, Control, and Computing (Allerton), Monticello, IL, 2015, pp. 195-202. https://doi.org/10.1109/ALLERTON.2015.7447004, J. Liu, M. G. Martinez, B. Li, J. Mathieu and C. L. Anderson, "A Comparison of Robust and Probabilistic Reliability for Systems with Renewables and Responsive Demand," 2016 49th Hawaii International Conference on System Sciences (HICSS), Koloa, HI, 2016, pp. 2373-2380. https://doi.org/10.1109/HICSS.2016.297, Li, B., Jiang, R. & Mathieu, J.L. "Ambiguous risk constraints with moment and unimodality information." Math. Program. 173, 151–192 (2019). https://doi.org/10.1007/s10107-017-1212-x, M. Vrakopoulou, B. Li and J. L. Mathieu, "Chance Constrained Reserve Scheduling Using Uncertain Controllable Loads Part I: Formulation and Scenario-Based Analysis," in IEEE Transactions on Smart Grid, vol. 10, no. 2, pp. 1608-1617, March 2019. https://doi.org/10.1109/TSG.2017.2773627, Y. Zhang, S. Shen and J. L. Mathieu, "Data-driven optimization approaches for optimal power flow with uncertain reserves from load control," 2015 American Control Conference (ACC), Chicago, IL, 2015, pp. 3013-3018. https://doi.org/10.1109/ACC.2015.7171795, Y. Zhang, S. Shen and J. L. Mathieu, "Distributionally Robust Chance-Constrained Optimal Power Flow With Uncertain Renewables and Uncertain Reserves Provided by Loads," in IEEE Transactions on Power Systems, vol. 32, no. 2, pp. 1378-1388, March , and Y. Zhang, S. Shen, B. Li and J. L. Mathieu, "Two-stage distributionally robust optimal power flow with flexible loads," 2017 IEEE Manchester PowerTech, Manchester, 2017, pp. 1-6. https://doi.org/10.1109/PTC.2017.7981202
- Discipline:
- Engineering
-
- Creator:
- Yao, Mengqi, Mathieu, Johanna L., Hiskens, Ian A., Molzahn, Daniel K., Koorehdavoudi, Kasra , and Roy, Sandip
- Description:
- The files include all the published paper and presentation source codes. Please install Matpower before running the code. The Matpower version is 5.1, which can be found in https://matpower.org/download/ Talks, papers, and poster in Deep Blue: http://hdl.handle.net/2027.42/150104
- Keyword:
- Demand response, Optimal power flow, Power system voltage stability, and Power system small signal stability L
- Citation to related publication:
- Yao, M., Molzahn, D. K., & Mathieu, J. L. (2019). An Optimal Power-Flow Approach to Improve Power System Voltage Stability Using Demand Response. IEEE Transactions on Control of Network Systems, 6(3), 1015–1025. https://doi.org/10.1109/TCNS.2019.2910455, Yao, M., Mathieu, J. L., & Molzahn, D. K. (2017). Using demand response to improve power system voltage stability margins. 2017 IEEE Manchester PowerTech, 1–6. https://doi.org/10.1109/PTC.2017.7980798 , Koorehdavoudi, K., Yao, M., & Mathieu, J. (2017). Using Demand Response to Shape the Fast Dynamics of the Bulk Power Network. https://www.semanticscholar.org/paper/Using-Demand-Response-to-Shape-the-Fast-Dynamics-of-Koorehdavoudi-Yao/6799c161744c29e7603e3601daa284ecc84788a8, Yao, M., Hiskens, I. A., & Mathieu, J. L. (2018). Improving Power System Voltage Stability by Using Demand Response to Maximize the Distance to the Closest Saddle-Node Bifurcation. 2018 IEEE Conference on Decision and Control (CDC), 2390–2395. https://doi.org/10.1109/CDC.2018.8619091 , and Yao, M., Molzahn, D. K., & Mathieu, J. L. (2017). The impact of load models in an algorithm for improving voltage stability via demand response. 2017 55th Annual Allerton Conference on Communication, Control, and Computing (Allerton), 149–156. https://doi.org/10.1109/ALLERTON.2017.8262731
- Discipline:
- Engineering
-
- Creator:
- Ledva, Gregory S., Zhe, Du, Peterson, Sarah, Balzano, Laura, and Mathieu, Johanna L.
- Description:
- This is the code that resulted from NSF grant ECCS-1508943, "Inferring the behavior of distributed energy resources from incomplete measurements." The project focused on developing control, estimation, and modeling methods for residential demand response and electric distribution networks. The talks, papers, and poster in Deep Blue: http://hdl.handle.net/2027.42/149480
- Keyword:
- online learning, energy disaggregation, residential demand response, networked control, Kalman filter, and frequency regulation
- Citation to related publication:
- Ledva, Gregory S., Laura Balzano, and Johanna L. Mathieu. "Inferring the behavior of distributed energy resources with online learning." 2015 53rd Annual Allerton Conference on Communication, Control, and Computing (Allerton). IEEE, 2015. https://doi.org/10.1109/ALLERTON.2015.7447003, Ledva, Gregory S., and Johanna L. Mathieu. "A linear approach to manage input delays while supplying frequency regulation using residential loads." 2017 American Control Conference (ACC). IEEE, 2017. https://doi.org/10.23919/ACC.2017.7963041, Ledva, Gregory S., Laura Balzano, and Johanna L. Mathieu. "Exploring Connections Between a Multiple Model Kalman Filter and Dynamic Fixed Share with Applications to Demand Response." 2018 IEEE Conference on Control Technology and Applications (CCTA). IEEE, 2018. https://doi.org/10.1109/CCTA.2018.8511493, Ledva, Gregory S., et al. "Disaggregating Load by Type from Distribution System Measurements in Real Time." Energy Markets and Responsive Grids. Springer, New York, NY, 2018. 413-437. https://doi.org/10.1007/978-1-4939-7822-9_17, Ledva, Gregory S., Sarah Peterson, and Johanna L. Mathieu. "Benchmarking of Aggregate Residential Load Models Used for Demand Response." 2018 IEEE Power & Energy Society General Meeting (PESGM). IEEE, 2018. https://doi.org/10.1109/PESGM.2018.8585847, Ledva, Gregory S., et al. "Managing communication delays and model error in demand response for frequency regulation." IEEE Transactions on Power Systems 33.2 (2018): 1299-1308. https://doi.org/10.1109/TPWRS.2017.2725834, Ledva, Gregory S., Laura Balzano, and Johanna L. Mathieu. "Real-time energy disaggregation of a distribution feeder's demand using online learning." IEEE Transactions on Power Systems 33.5 (2018): 4730-4740. https://doi.org/10.1109/TPWRS.2018.2800535, and Talks, papers, and poster in Deep Blue: http://hdl.handle.net/2027.42/149480
- Discipline:
- Engineering
-
- Creator:
- Ruas, Terry, Ferreira, Charles H. P., Grosky, William, França, Fabrício O., and Medeiros, Débora M. R,
- Description:
- The relationship between words in a sentence often tell us more about the underlying semantic content of a document than its actual words, individually. Recent publications in the natural language processing arena, more specifically using word embeddings, try to incorporate semantic aspects into their word vector representation by considering the context of words and how they are distributed in a document collection. In this work, we propose two novel algorithms, called Flexible Lexical Chain II and Fixed Lexical Chain II that combine the semantic relations derived from lexical chains, prior knowledge from lexical databases, and the robustness of the distributional hypothesis in word embeddings into a single decoupled system. In short, our approach has three main contributions: (i) unsupervised techniques that fully integrate word embeddings and lexical chains; (ii) a more solid semantic representation that considers the latent relation between words in a document; and (iii) lightweight word embeddings models that can be extended to any natural language task. Knowledge-based systems that use natural language text can benefit from our approach to mitigate ambiguous semantic representations provided by traditional statistical approaches. The proposed techniques are tested against seven word embeddings algorithms using five different machine learning classifiers over six scenarios in the document classification task. Our results show that the integration between lexical chains and word embeddings representations sustain state-of-the-art results, even against more complex systems. Github: https://github.com/truas/LexicalChain_Builder
- Keyword:
- document classification, lexical chains, word embeddings, synset embeddings, chain2vec, and natural language processing
- Citation to related publication:
- Terry Ruas, Charles Henrique Porto Ferreira, William Grosky, Fabrício Olivetti de França, Débora Maria Rossi de Medeiros, "Enhanced word embeddings using multi-semantic representation through lexical chains", Information Sciences, 2020, https://doi.org/10.1016/j.ins.2020.04.048
- Discipline:
- Other, Science, and Engineering